ip17xx: Avoid auto-negotiation

Let ip175c_config_init() initialize the link state of the PHY and set the
PHY state machine directly to the PHY_RUNNING state in order to skip the
auto-negotiation phase.

Previously, auto-negotiation on PHY 0 (switch port 0) influenced the ethernet
driver connected to the CPU port, causing all sorts of weird effects.

Signed-off-by: Martin Mares <mj@ucw.cz>
Signed-off-by: Patrick Horn <patrick.horn@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21720 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c
index ede5d51..ef4b4d9 100644 (file)
--- a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c
+++ b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c
@@ -1344,6 +1344,11 @@ static int ip175c_config_init(struct phy_device *pdev)
        ip175c_reset(&state->dev);
 
        state->registered = true;
+
+       pdev->state = PHY_RUNNING;
+       pdev->speed = SPEED_100;
+       pdev->duplex = DUPLEX_FULL;
+       pdev->pause = pdev->asym_pause = 0;
        netif_carrier_on(pdev->attached_dev);
 
        return 0;
@@ -1365,9 +1370,6 @@ static int ip175c_config_aneg(struct phy_device *pdev)
 
 static int ip175c_read_status(struct phy_device *pdev)
 {
-       pdev->speed = SPEED_100;
-       pdev->duplex = DUPLEX_FULL;
-       pdev->pause = pdev->asym_pause = 0;
        return 0;
 }