[lantiq] Add 3.3 config files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/lantiq/ase/config-default b/target/linux/lantiq/ase/config-default
index 8d2597d..33db810 100644 (file)
--- a/target/linux/lantiq/ase/config-default
+++ b/target/linux/lantiq/ase/config-default
@@ -4,7 +4,6 @@ CONFIG_FSNOTIFY=y
 CONFIG_HAVE_MACH_CLKDEV=y
 CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_POLLDEV=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_ISDN is not set

diff --git a/target/linux/lantiq/config-3.3 b/target/linux/lantiq/config-3.3
new file mode 100644 (file)
index 0000000..d65c08b
--- /dev/null
+++ b/target/linux/lantiq/config-3.3
@@ -0,0 +1,117 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_BCMA_POSSIBLE=y
+# CONFIG_BRCMUTIL is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IFX_UDP_REDIRECT=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_LANTIQ=y
+CONFIG_LANTIQ_MACH_95C3AM1=y
+CONFIG_LANTIQ_MACH_EASY98000=y
+CONFIG_LANTIQ_MACH_EASY98020=y
+CONFIG_LANTIQ_WDT=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MACH_NO_WESTBRIDGE=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366_SMI=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_LANTIQ=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0

diff --git a/target/linux/lantiq/danube/config-default b/target/linux/lantiq/danube/config-default
index ff04f3c..417f090 100644 (file)
--- a/target/linux/lantiq/danube/config-default
+++ b/target/linux/lantiq/danube/config-default
@@ -2,12 +2,12 @@ CONFIG_ADM6996_PHY=y
 CONFIG_AR8216_PHY=y
 # CONFIG_ATMEL_PWM is not set
 CONFIG_CLKDEV_LOOKUP=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FSNOTIFY=y
 CONFIG_HAVE_MACH_CLKDEV=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_POLLDEV=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_ISDN is not set

diff --git a/target/linux/lantiq/falcon/config-default b/target/linux/lantiq/falcon/config-default
index e1210e1..1c3ac45 100644 (file)
--- a/target/linux/lantiq/falcon/config-default
+++ b/target/linux/lantiq/falcon/config-default
@@ -4,6 +4,7 @@ CONFIG_FSNOTIFY=y
 CONFIG_HAVE_MACH_CLKDEV=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y

diff --git a/target/linux/lantiq/vr9/config-default b/target/linux/lantiq/vr9/config-default
index 5fe73db..c2fe001 100644 (file)
--- a/target/linux/lantiq/vr9/config-default
+++ b/target/linux/lantiq/vr9/config-default
@@ -4,12 +4,12 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_ATMEL_PWM is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CLKDEV_LOOKUP=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FSNOTIFY=y
 CONFIG_HAVE_MACH_CLKDEV=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_POLLDEV=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_ISDN is not set
@@ -49,6 +49,5 @@ CONFIG_SPI=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
-# CONFIG_SPI_XWAY is not set
 CONFIG_USB_ARCH_HAS_XHCI=y
 CONFIG_USB_SUPPORT=y