ramips: Add hex prefix (0x) to dtsi reg properties where needed.

[openwrt.git] / target / linux / ramips / dts / WR6202.dts

diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
index 1e41756..0c80514 100644 (file)
--- a/target/linux/ramips/dts/WR6202.dts
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -10,25 +10,23 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wps {
                        label = "wr6202:blue:wps";
                        gpios = <&gpio0 14 1>;
                };
+
                3g {
                        label = "wr6202:blue:3g";
                        gpios = <&gpio0 13 1>;
@@ -40,11 +38,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
@@ -55,7 +55,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -86,30 +85,29 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x28>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3e>;
+               mediatek,portmap = <0x3e>;
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        otg@101c0000 {
                status = "okay";
        };
 
-       usb0: gpio-regulator {
-               compatible = "regulator-gpio";
-
-               regulator-name = "usb0-power";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               regulator-boot-on;
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
 
-               enable-gpio = <&gpio0 11 0>;
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio0 11 0>;
+               };
        };
 };