ramips: add additional uarts to mt7628.dtsi

[openwrt.git] / target / linux / ramips / dts / WHR-1166D.dts

diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
index 1b5a3d7..9c48d0c 100644 (file)
--- a/target/linux/ramips/dts/WHR-1166D.dts
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -42,12 +42,7 @@
 
                                partition@50000 {
                                        label = "firmware";
-                                       reg = <0x50000 0xeb0000>;
-                               };
-
-                               partition@e00000 {
-                                       label = "usercfg";
-                                       reg = <0xf00000 0x100000>;
+                                       reg = <0x50000 0xfb0000>;
                                };
                        };
                };
@@ -56,7 +51,7 @@
        pinctrl {
                state_default: pinctrl0 {
                        gpio {
-                               ralink,group = "i2c", "uartf", "rgmii1", "wled", "nd_sd";
+                               ralink,group = "i2c", "uartf", "wled", "nd_sd";
                                ralink,function = "gpio";
                        };
                };
@@ -64,7 +59,7 @@
 
        ethernet@10100000 {
                pinctrl-names = "default";
-               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+               pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 
                port@5 {
                        status = "okay";
@@ -92,6 +87,15 @@
 
        pcie@10140000 {
                status = "okay";
+
+               pcie-bridge {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 32768>;
+                               mediatek,2ghz = <0>;
+                       };
+               };
        };
        
        gpio-leds {
@@ -100,16 +104,16 @@
                        label = "buffalo:red:power";
                        gpios = <&gpio0 7 1>;
                };
-               status {
-                       label = "buffalo:green:status";
+               wifi {
+                       label = "buffalo:green:wifi";
                        gpios = <&gpio0 8 1>;
                };
                power2 {
                        label = "buffalo:green:power";
                        gpios = <&gpio0 9 1>;
                };
-               status2 {
-                       label = "buffalo:orange:status";
+               wifi2 {
+                       label = "buffalo:orange:wifi";
                        gpios = <&gpio0 10 1>;
                };
                internet {
@@ -117,11 +121,11 @@
                        gpios = <&gpio2 17 1>;
                };
                router {
-                       label = "buffalo:green:router";
+                       label = "buffalo:orange:router";
                        gpios = <&gpio2 18 1>;
                };
                router2 {
-                       label = "buffalo:orange:router";
+                       label = "buffalo:green:router";
                        gpios = <&gpio2 19 1>;
                };
        };
@@ -131,25 +135,27 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
-               s1 {
+               reset {
                        label = "reset";
                        gpios = <&gpio2 12 1>;
-                       linux,code = <0x100>;
+                       linux,code = <0x198>;
                };
-               s2 {
+               aoss {
                        label = "aoss";
                        gpios = <&gpio2 13 1>;
-                       linux,code = <0x101>;
+                       linux,code = <0x211>;
                };
-               s3 {
+               ap {
                        label = "ap";
                        gpios = <&gpio2 14 1>;
-                       linux,code = <0x102>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
                };
-               s4 {
+               bridge {
                        label = "bridge";
                        gpios = <&gpio2 15 1>;
-                       linux,code = <0x103>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
                };
        };
 };