#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
-#include "dev-usb.h"
#include "machtypes.h"
#define WNDAP360_GPIO_LED_POWER_ORANGE 0
#define WNDAP360_GPIO_LED_POWER_GREEN 2
/* Reset button - next to the power connector */
-#define WNDAP360_GPIO_BTN_RESET 3
-/* WPS button - next to a led on right */
-#define WNDAP360_GPIO_BTN_WPS 8
+#define WNDAP360_GPIO_BTN_RESET 8
#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL)
*/
static struct gpio_led wndap360_leds_gpio[] __initdata = {
{
- .name = "wndap360:green:power",
+ .name = "netgear:green:power",
.gpio = WNDAP360_GPIO_LED_POWER_GREEN,
.active_low = 1,
}, {
- .name = "wndap360:orange:power",
+ .name = "netgear:orange:power",
.gpio = WNDAP360_GPIO_LED_POWER_ORANGE,
.active_low = 1,
}
ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ /* Reusing wifi MAC with offset of 1 as eth0 MAC */
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + WNDAP360_WMAC0_MAC_OFFSET, 1);
ath79_eth0_pll_data.pll_1000 = 0x11110000;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
ath79_register_eth(0);
- ath79_register_usb();
-
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
ARRAY_SIZE(wndap360_gpio_keys),
wndap360_gpio_keys);
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
art + WNDAP360_WMAC0_MAC_OFFSET,
art + WNDAP360_CALDATA1_OFFSET,