ar71xx: fix section mismatch

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ubnt.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
index 5af18a7..5db5931 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
@@ -133,6 +133,17 @@ static void __init ubnt_generic_setup(void)
        pb42_pci_init();
 }
 
+/*
+ * There is Secondary MAC address duplicate problem with some UBNT HW batches.
+ * Do not increase Secondary MAC address by 1 but do workaround
+ * with 'Locally Administrated' bit.
+ */
+static void __init ubnt_init_secondary_mac(unsigned char *mac_base)
+{
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0);
+       ar71xx_eth1_data.mac_addr[0] |= 0x02;
+}
+
 #define UBNT_RS_WAN_PHYMASK    (1 << 20)
 #define UBNT_RS_LAN_PHYMASK    ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
 
@@ -146,7 +157,7 @@ static void __init ubnt_rs_setup(void)
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
 
-       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+       ubnt_init_secondary_mac(ar71xx_mac_base);
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.speed = SPEED_100;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
@@ -170,13 +181,14 @@ static void __init ubnt_rspro_setup(void)
 {
        ubnt_generic_setup();
 
-       ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK));
+       ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK |
+                                UBNT_RSPRO_LAN_PHYMASK));
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
 
-       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+       ubnt_init_secondary_mac(ar71xx_mac_base);
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
        ar71xx_eth1_data.speed = SPEED_1000;
@@ -224,15 +236,16 @@ MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
 
 static void __init ubnt_m_setup(void)
 {
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
        ar71xx_add_device_m25p80(NULL);
 
        ar71xx_add_device_mdio(~0);
 
-       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
-       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
@@ -269,6 +282,7 @@ static void __init ubnt_nano_m_setup(void)
 {
        ubnt_m_setup();
 
+       ar71xx_eth1_data.has_ar7240_switch = 1;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.speed = SPEED_1000;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
@@ -281,3 +295,40 @@ static void __init ubnt_nano_m_setup(void)
 
 MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
             ubnt_nano_m_setup);
+
+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
+       {
+               .name           = "ubnt:orange:dome",
+               .gpio           = 1,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:green:dome",
+               .gpio           = 0,
+               .active_low     = 0,
+       }
+};
+
+static void __init ubnt_unifi_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ar71xx_add_device_m25p80(NULL);
+
+       ar71xx_add_device_mdio(~0);
+
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+       ar71xx_add_device_eth(0);
+
+       ap91_pci_init(ee, NULL);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
+                                       ubnt_unifi_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI, "UBNT-XM", "Ubiquiti UniFi",
+            ubnt_unifi_setup);