* by the Free Software Foundation.
*/
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#define TL_WA901ND_GPIO_LED_QSS 0
#define TL_WA901ND_GPIO_LED_SYSTEM 1
+#define TL_WA901ND_GPIO_LED_LAN 13
#define TL_WA901ND_GPIO_BTN_RESET 11
#define TL_WA901ND_GPIO_BTN_QSS 12
#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition tl_wa901nd_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x290000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3d0000,
- }
+static const char *tl_wa901nd_part_probes[] = {
+ "tp-link",
+ NULL,
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_wa901nd_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = tl_wa901nd_partitions,
- .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions),
-#endif
+ .part_probes = tl_wa901nd_part_probes,
};
static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
{
- .name = "tl-wa901nd:green:system",
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA901ND_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
.gpio = TL_WA901ND_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
- .name = "tl-wa901nd:green:qss",
+ .name = "tp-link:green:qss",
.gpio = TL_WA901ND_GPIO_LED_QSS,
.active_low = 1,
}
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
/*
* ar71xx_eth0 would be the WAN port, but is not connected on
* the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
* however we have a single LAN port only.
*/
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
- ar71xx_eth1_data.has_ar7240_switch = 1;
-
- ar71xx_add_device_mdio(0x0);
+ ar71xx_add_device_mdio(0, 0x0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);