ar71xx: add user-space support for OpenMesh MR900v2

[15.05/openwrt.git] / target / linux / ar71xx / base-files / etc / uci-defaults / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index aca8509..7255970 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -66,6 +66,12 @@ db120)
        ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
        ;;
 
+dragino2)
+       ucidef_set_led_wlan "wlan" "WLAN" "dragino2:red:wlan" "phy0tpt"
+       ucidef_set_led_netdev "lan" "LAN" "dragino2:red:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "dragino2:red:wan" "eth1"
+       ;;
+
 eap300v2)
        ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt"
@@ -146,6 +152,13 @@ mr600)
        ucidef_set_led_wlan "wlan58" "WLAN58" "mr600:green:wlan58" "phy0tpt"
        ;;
 
+mr900 | \
+mr900v2)
+       ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0"
+       ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt"
+       ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt"
+       ;;
+
 mynet-n600)
        ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
        ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02"
@@ -426,6 +439,16 @@ wlae-ag300n)
        ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
        ;;
 
+wnr2000-v4)
+       ucidef_set_led_netdev "wan" "WAN" "wnr2000-v4:green:wan" "eth1"
+       ucidef_set_led_netdev "wlan" "WLAN" "wnr2000-v4:blue:wlan" "wlan0"
+       ucidef_set_led_switch "lan1" "LAN1" "wnr2000-v4:amber:lan1" "switch0" "0x04"
+       ucidef_set_led_switch "lan2" "LAN2" "wnr2000-v4:amber:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "wnr2000-v4:amber:lan3" "switch0" "0x10"
+       ucidef_set_led_switch "lan4" "LAN4" "wnr2000-v4:amber:lan4" "switch0" "0x02"
+       ucidef_set_led_usbdev "usb" "USB" "wnr2000-v4:amber:status" "1-1"
+    ;;
+
 wzr-hp-ag300h)
        ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
        ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"