+# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
menu "Busybox Library Tuning"
+config BUSYBOX_CONFIG_FEATURE_SYSTEMD
+ bool "Enable systemd support"
+ default n
+ help
+ If you plan to use busybox daemons on a system where daemons
+ are controlled by systemd, enable this option.
+ If you don't use systemd, it is still safe to enable it,
+ but the downside is increased code size.
+config BUSYBOX_CONFIG_FEATURE_RTMINMAX
+ bool "Support RTMIN[+n] and RTMAX[-n] signal names"
+ default n
+ help
+ Support RTMIN[+n] and RTMAX[-n] signal names
+ in kill, killall etc. This costs ~250 bytes.
+
config BUSYBOX_CONFIG_PASSWORD_MINLEN
int "Minimum password length"
default 6
Minimum allowable password length.
config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
- int " MD5: Trade Bytes for Speed"
+ int "MD5: Trade bytes for speed (0:fast, 3:slow)"
default 2
range 0 3
help
a rarely used feature which allows you to use names
instead of IP/mask pairs in route command.
+config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
+ bool "Use termios to manipulate the screen"
+ default n
+ depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
+ help
+ This option allows utilities such as 'more' and 'top' to determine
+ the size of the screen. If you leave this disabled, your utilities
+ that display things on the screen will be especially primitive and
+ will be unable to determine the current screen size, and will be
+ unable to move the cursor.
+
config BUSYBOX_CONFIG_FEATURE_EDITING
bool "Command line editing"
default y
You may want to decrease this parameter if your target machine
benefits from smaller stack usage.
-config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_KEYS
- bool "Additional editing keys"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Enable additonal editing keys (Ctrl-E, Ctrl-U etc).
- Arrow keys, Home/End/Delete and Ctrl-W work even without this option.
-
config BUSYBOX_CONFIG_FEATURE_EDITING_VI
bool "vi-style line editing commands"
default n
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Enable vi-style line editing. In shells, this mode can be
+ Enable vi-style line editing. In shells, this mode can be
turned on and off with "set -o vi" and "set +o vi".
config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
int "History size"
- range 0 99999
+ # Don't allow way too big values here, code uses fixed "char *history[N]" struct member
+ range 0 9999
default 256
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Specify command history size.
+ Specify command history size (0 - disable).
config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
bool "History saving"
default n
- depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_EDITING
+ depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Enable history saving in ash shell.
+ Enable history saving in shells.
+
+config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
+ bool "Reverse history search"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
+ help
+ Enable readline-like Ctrl-R combination for reverse history search.
+ Increases code by about 0.5k.
config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
bool "Tab completion"
Setting this option allows for prompts to use things like \w and
\$ and escape codes.
+config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
+ bool "Query cursor position from terminal"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_EDITING
+ help
+ Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
+ current cursor position. This information is used to make line
+ editing more robust in some cases.
+ If you are not sure whether your terminals respond to this code
+ correctly, or want to save on code size (about 400 bytes),
+ then do not turn this option on.
+
+config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
+ bool "Non-POSIX, but safer, copying to special nodes"
+ default y
+ help
+ With this option, "cp file symlink" will delete symlink
+ and create a regular file. This does not conform to POSIX,
+ but prevents a symlink attack.
+ Similarly, "cp file device" will not send file's data
+ to the device. (To do that, use "cat file >device")
+
+config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
+ bool "Give more precise messages when copy fails (cp, mv etc)"
+ default n
+ help
+ Error messages with this feature enabled:
+ $ cp file /does_not_exist/file
+ cp: cannot create '/does_not_exist/file': Path does not exist
+ $ cp file /vmlinuz/file
+ cp: cannot stat '/vmlinuz/file': Path has non-directory component
+ If this feature is not enabled, they will be, respectively:
+ cp: cannot create '/does_not_exist/file': No such file or directory
+ cp: cannot stat '/vmlinuz/file': Not a directory
+ This will cost you ~60 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
+ int "Copy buffer size, in kilobytes"
+ range 1 1024
+ default 4
+ help
+ Size of buffer used by cp, mv, install, wget etc.
+ Buffers which are 4 kb or less will be allocated on stack.
+ Bigger buffers will be allocated with mmap, with fallback to 4 kb
+ stack buffer if mmap fails.
+
+config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
+ bool "Skip rootfs in mount table"
+ default n
+ help
+ Ignore rootfs entry in mount table.
+
+ In Linux, kernel has a special filesystem, rootfs, which is initially
+ mounted on /. It contains initramfs data, if kernel is configured
+ to have one. Usually, another file system is mounted over / early
+ in boot process, and therefore most tools which manipulate
+ mount table, such as df, will skip rootfs entry.
+
+ However, some systems do not mount anything on /.
+ If you need to configure busybox for one of these systems,
+ you may find useful to turn this option off to make df show
+ initramfs statistic.
+
+ Otherwise, choose Y.
+
config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
time intervals (time, ping, traceroute etc need this).
Use ioctl names rather than hex values in error messages
(e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
saves about 1400 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_HWIB
+ bool "Support infiniband HW"
+ default n
+ help
+ Support for printing infiniband addresses in
+ network applets.
+
endmenu
projects / openwrt.git / blobdiff