base-files: board.d: support dsl modems, atm bridges and pppoe protocol

[openwrt.git] / package / base-files / files / lib / functions / uci-defaults.sh

diff --git a/package/base-files/files/lib/functions/uci-defaults.sh b/package/base-files/files/lib/functions/uci-defaults.sh
index 2cbf69a..2658d43 100644 (file)
--- a/package/base-files/files/lib/functions/uci-defaults.sh
+++ b/package/base-files/files/lib/functions/uci-defaults.sh
@@ -2,6 +2,7 @@
 # Copyright (C) 2011 OpenWrt.org
 
 UCIDEF_LEDS_CHANGED=0
+UCIDEF_GPIO_SWITCHES_CHANGED=0
 
 ucidef_set_led_netdev() {
        local cfg="led_$1"
@@ -94,9 +95,149 @@ EOF
        UCIDEF_LEDS_CHANGED=1
 }
 
+ucidef_set_led_rssi() {
+       local cfg="led_$1"
+       local name=$2
+       local sysfs=$3
+       local iface=$4
+       local minq=$5
+       local maxq=$6
+       local offset=$7
+       local factor=$8
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='rssi'
+set system.$cfg.iface='rssid_$iface'
+set system.$cfg.minq='$minq'
+set system.$cfg.maxq='$maxq'
+set system.$cfg.offset='$offset'
+set system.$cfg.factor='$factor'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
+ucidef_set_led_timer() {
+       local cfg="led_$1"
+       local name=$2
+       local sysfs=$3
+       local delayon=$4
+       local delayoff=$5
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='timer'
+set system.$cfg.delayon='$delayon'
+set system.$cfg.delayoff='$delayoff'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
+ucidef_set_led_mmc() {
+       local cfg="led_$1"
+       local name=$2
+       local sysfs=$3
+       local trigger=$4
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='$trigger'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
+ucidef_set_led_trigger_gpio() {
+       local cfg="led_$1"
+       local name=$2
+       local sysfs=$3
+       local gpio=$4
+       local inverted=$5
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='gpio'
+set system.$cfg.gpio='$gpio'
+set system.$cfg.inverted='$inverted'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
+ucidef_set_led_ide_disk() {
+       local cfg="led_$1"
+       local name=$2
+       local sysfs=$3
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='ide-disk'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
+ucidef_set_rssimon() {
+       local dev="$1"
+       local refresh="$2"
+       local threshold="$3"
+
+       local cfg="rssid_$dev"
+
+       uci -q get system.$cfg && return 0
+
+       uci batch <<EOF
+set system.$cfg='rssid'
+set system.$cfg.dev='$dev'
+set system.$cfg.refresh='$refresh'
+set system.$cfg.threshold='$threshold'
+EOF
+       UCIDEF_LEDS_CHANGED=1
+}
+
 ucidef_commit_leds()
 {
-       [ "$UCIDEF_LEDS_CHANGED" == "1" ] && uci commit system
+       [ "$UCIDEF_LEDS_CHANGED" = "1" ] && uci commit system
+}
+
+ucidef_set_gpio_switch() {
+       local cfg="gpio_switch_$1"
+       local name="$2"
+       local gpio_pin="$3"
+       # use "0" as default value
+       local default="${4:-0}"
+
+       uci -q get "system.$cfg" && return 0
+
+       uci batch <<EOF
+set system.$cfg='gpio_switch'
+set system.$cfg.name='$name'
+set system.$cfg.gpio_pin='$gpio_pin'
+set system.$cfg.value='$default'
+EOF
+       UCIDEF_GPIO_SWITCHES_CHANGED=1
+}
+
+ucidef_commit_gpio_switches()
+{
+       [ "$UCIDEF_GPIO_SWITCHES_CHANGED" = "1" ] && uci commit system
 }
 
 ucidef_set_interface_loopback() {
@@ -106,17 +247,20 @@ set network.loopback.ifname='lo'
 set network.loopback.proto='static'
 set network.loopback.ipaddr='127.0.0.1'
 set network.loopback.netmask='255.0.0.0'
+set network.globals='globals'
+set network.globals.ula_prefix='auto'
 EOF
 }
 
 ucidef_set_interface_raw() {
        local cfg=$1
        local ifname=$2
+       local proto=${3:-"none"}
 
        uci batch <<EOF
 set network.$cfg='interface'
 set network.$cfg.ifname='$ifname'
-set network.$cfg.proto='none'
+set network.$cfg.proto='$proto'
 EOF
 }
 
@@ -126,10 +270,12 @@ ucidef_set_interface_lan() {
        uci batch <<EOF
 set network.lan='interface'
 set network.lan.ifname='$ifname'
+set network.lan.force_link=1
 set network.lan.type='bridge'
 set network.lan.proto='static'
 set network.lan.ipaddr='192.168.1.1'
 set network.lan.netmask='255.255.255.0'
+set network.lan.ip6assign='60'
 EOF
 }
 
@@ -140,6 +286,9 @@ ucidef_set_interface_wan() {
 set network.wan='interface'
 set network.wan.ifname='$ifname'
 set network.wan.proto='dhcp'
+set network.wan6='interface'
+set network.wan6.ifname='$ifname'
+set network.wan6.proto='dhcpv6'
 EOF
 }
 
@@ -184,3 +333,13 @@ set network.@switch_vlan[-1].ports='$ports'
 EOF
 }
 
+ucidef_add_switch_port() {
+       local device=$1
+       local port=$2
+       uci batch <<EOF
+add network switch_port
+set network.@switch_port[-1].device='$device'
+set network.@switch_port[-1].port='$port'
+EOF
+}
+