target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch

   1 --- a/arch/arm/boot/dts/Makefile
   2 +++ b/arch/arm/boot/dts/Makefile
   3 @@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
   4         sun7i-a20-cubietruck.dtb \
   5         sun7i-a20-hummingbird.dtb \
   6         sun7i-a20-i12-tvbox.dtb \
   7 +       sun7i-a20-lamobo-r1.dtb \
   8         sun7i-a20-olinuxino-lime.dtb \
   9         sun7i-a20-olinuxino-micro.dtb \
  10         sun7i-a20-pcduino3.dtb
  11 --- /dev/null
  12 +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
  13 @@ -0,0 +1,235 @@
  14 +/*
  15 + * Copyright 2015 Daniel Golle <daniel@makrotopia.org>
  16 + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  17 + *
  18 + * This file is dual-licensed: you can use it either under the terms
  19 + * of the GPL or the X11 license, at your option. Note that this dual
  20 + * licensing only applies to this file, and not this project as a
  21 + * whole.
  22 + *
  23 + *  a) This library is free software; you can redistribute it and/or
  24 + *     modify it under the terms of the GNU General Public License as
  25 + *     published by the Free Software Foundation; either version 2 of the
  26 + *     License, or (at your option) any later version.
  27 + *
  28 + *     This library is distributed in the hope that it will be useful,
  29 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  30 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  31 + *     GNU General Public License for more details.
  32 + *
  33 + *     You should have received a copy of the GNU General Public
  34 + *     License along with this library; if not, write to the Free
  35 + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  36 + *     MA 02110-1301 USA
  37 + *
  38 + * Or, alternatively,
  39 + *
  40 + *  b) Permission is hereby granted, free of charge, to any person
  41 + *     obtaining a copy of this software and associated documentation
  42 + *     files (the "Software"), to deal in the Software without
  43 + *     restriction, including without limitation the rights to use,
  44 + *     copy, modify, merge, publish, distribute, sublicense, and/or
  45 + *     sell copies of the Software, and to permit persons to whom the
  46 + *     Software is furnished to do so, subject to the following
  47 + *     conditions:
  48 + *
  49 + *     The above copyright notice and this permission notice shall be
  50 + *     included in all copies or substantial portions of the Software.
  51 + *
  52 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  53 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  54 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  55 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  56 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  57 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  58 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  59 + *     OTHER DEALINGS IN THE SOFTWARE.
  60 + */
  61 +
  62 +/dts-v1/;
  63 +/include/ "sun7i-a20.dtsi"
  64 +/include/ "sunxi-common-regulators.dtsi"
  65 +#include <dt-bindings/input/input.h>
  66 +
  67 +/ {
  68 +       model = "Lamobo R1";
  69 +       compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
  70 +
  71 +       soc@01c00000 {
  72 +               spi0: spi@01c05000 {
  73 +                       pinctrl-names = "default";
  74 +                       pinctrl-0 = <&spi0_pins_a>;
  75 +                       status = "okay";
  76 +               };
  77 +
  78 +               mmc0: mmc@01c0f000 {
  79 +                       pinctrl-names = "default";
  80 +                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>;
  81 +                       vmmc-supply = <&reg_vcc3v3>;
  82 +                       bus-width = <4>;
  83 +                       cd-gpios = <&pio 7 10 0>; /* PH10 */
  84 +                       cd-inverted;
  85 +                       status = "okay";
  86 +               };
  87 +
  88 +               usbphy: phy@01c13400 {
  89 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
  90 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
  91 +                       status = "okay";
  92 +               };
  93 +
  94 +               ehci0: usb@01c14000 {
  95 +                       status = "okay";
  96 +               };
  97 +
  98 +               ohci0: usb@01c14400 {
  99 +                       status = "okay";
 100 +               };
 101 +
 102 +               ahci: sata@01c18000 {
 103 +                       target-supply = <&reg_ahci_5v>;
 104 +                       status = "okay";
 105 +               };
 106 +
 107 +               ehci1: usb@01c1c000 {
 108 +                       status = "okay";
 109 +               };
 110 +
 111 +               ohci1: usb@01c1c400 {
 112 +                       status = "okay";
 113 +               };
 114 +
 115 +               pinctrl@01c20800 {
 116 +                       mmc0_cd_pin_lamobo: mmc0_cd_pin@0 {
 117 +                               allwinner,pins = "PH10";
 118 +                               allwinner,function = "gpio_in";
 119 +                               allwinner,drive = <0>;
 120 +                               allwinner,pull = <1>;
 121 +                       };
 122 +
 123 +                       gmac_power_pin_lamobo: gmac_power_pin@0 {
 124 +                               allwinner,pins = "PH23";
 125 +                               allwinner,function = "gpio_out";
 126 +                               allwinner,drive = <0>;
 127 +                               allwinner,pull = <0>;
 128 +                       };
 129 +
 130 +                       led_pins_lamobo: led_pins@0 {
 131 +                               allwinner,pins = "PH2";
 132 +                               allwinner,function = "gpio_out";
 133 +                               allwinner,drive = <1>;
 134 +                               allwinner,pull = <0>;
 135 +                       };
 136 +               };
 137 +
 138 +               lradc: lradc@01c22800 {
 139 +                       allwinner,chan0-step = <200>;
 140 +                       linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
 141 +                                               KEY_MENU KEY_SEARCH KEY_HOME
 142 +                                               KEY_ESC KEY_ENTER>;
 143 +                       status = "okay";
 144 +               };
 145 +
 146 +               ir0: ir@01c21800 {
 147 +                       pinctrl-names = "default";
 148 +                       pinctrl-0 = <&ir0_pins_a>;
 149 +                       status = "okay";
 150 +               };
 151 +
 152 +               uart0: serial@01c28000 {
 153 +                       pinctrl-names = "default";
 154 +                       pinctrl-0 = <&uart0_pins_a>;
 155 +                       status = "okay";
 156 +               };
 157 +
 158 +               uart3: serial@01c28c00 {
 159 +                       pinctrl-names = "default";
 160 +                       pinctrl-0 = <&uart3_pins_b>;
 161 +                       status = "okay";
 162 +               };
 163 +
 164 +               uart7: serial@01c29c00 {
 165 +                       pinctrl-names = "default";
 166 +                       pinctrl-0 = <&uart7_pins_a>;
 167 +                       status = "okay";
 168 +               };
 169 +
 170 +               i2c0: i2c@01c2ac00 {
 171 +                       pinctrl-names = "default";
 172 +                       pinctrl-0 = <&i2c0_pins_a>;
 173 +                       status = "okay";
 174 +
 175 +                       axp209: pmic@34 {
 176 +                               compatible = "x-powers,axp209";
 177 +                               reg = <0x34>;
 178 +                               interrupt-parent = <&nmi_intc>;
 179 +                               interrupts = <0 8>;
 180 +
 181 +                               interrupt-controller;
 182 +                               #interrupt-cells = <1>;
 183 +                       };
 184 +               };
 185 +
 186 +               i2c1: i2c@01c2b000 {
 187 +                       pinctrl-names = "default";
 188 +                       pinctrl-0 = <&i2c1_pins_a>;
 189 +                       status = "okay";
 190 +               };
 191 +
 192 +               i2c2: i2c@01c2b400 {
 193 +                       pinctrl-names = "default";
 194 +                       pinctrl-0 = <&i2c2_pins_a>;
 195 +                       status = "okay";
 196 +               };
 197 +
 198 +               gmac: ethernet@01c50000 {
 199 +                       pinctrl-names = "default";
 200 +                       pinctrl-0 = <&gmac_pins_rgmii_a>;
 201 +                       phy = <&phy1>;
 202 +                       phy-mode = "rgmii";
 203 +                       phy-supply = <&reg_gmac_3v3>;
 204 +                       status = "okay";
 205 +
 206 +                       phy1: ethernet-phy@1 {
 207 +                               reg = <1>;
 208 +                       };
 209 +               };
 210 +       };
 211 +
 212 +       leds {
 213 +               compatible = "gpio-leds";
 214 +               pinctrl-names = "default";
 215 +               pinctrl-0 = <&led_pins_lamobo>;
 216 +
 217 +               green {
 218 +                       label = "lamobo:green:usr";
 219 +                       gpios = <&pio 7 24 0>;
 220 +                       default-state = "on";
 221 +               };
 222 +       };
 223 +
 224 +       reg_ahci_5v: ahci-5v {
 225 +               status = "okay";
 226 +       };
 227 +
 228 +       reg_usb1_vbus: usb1-vbus {
 229 +               status = "okay";
 230 +       };
 231 +
 232 +       reg_usb2_vbus: usb2-vbus {
 233 +               status = "okay";
 234 +       };
 235 +
 236 +       reg_gmac_3v3: gmac-3v3 {
 237 +               compatible = "regulator-fixed";
 238 +               pinctrl-names = "default";
 239 +               pinctrl-0 = <&gmac_power_pin_lamobo>;
 240 +               regulator-name = "gmac-3v3";
 241 +               regulator-min-microvolt = <3300000>;
 242 +               regulator-max-microvolt = <3300000>;
 243 +               startup-delay-us = <100000>;
 244 +               enable-active-high;
 245 +               gpio = <&pio 7 23 0>;
 246 +               status = "okay";
 247 +       };
 248 +};