target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch

   1 From 900fa0abfea0cb7562c523769981dadc25f1f8cd Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Sun, 27 Jul 2014 09:43:42 +0100
   4 Subject: [PATCH 37/57] USB: phy: add ralink SoC driver
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  drivers/usb/phy/Kconfig      |    8 ++
   9  drivers/usb/phy/Makefile     |    1 +
  10  drivers/usb/phy/ralink-phy.c |  190 ++++++++++++++++++++++++++++++++++++++++++
  11  3 files changed, 199 insertions(+)
  12  create mode 100644 drivers/usb/phy/ralink-phy.c
  13
  14 diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
  15 index 7d1451d..fc04d76 100644
  16 --- a/drivers/usb/phy/Kconfig
  17 +++ b/drivers/usb/phy/Kconfig
  18 @@ -251,6 +251,14 @@ config USB_RCAR_GEN2_PHY
  19           To compile this driver as a module, choose M here: the
  20           module will be called phy-rcar-gen2-usb.
  21
  22 +config RALINK_USBPHY
  23 +       bool "Ralink USB PHY controller Driver"
  24 +       depends on MIPS && RALINK
  25 +       select USB_PHY
  26 +       help
  27 +         Enable this to support ralink USB phy controller for ralink
  28 +         SoCs.
  29 +
  30  config USB_ULPI
  31         bool "Generic ULPI Transceiver Driver"
  32         depends on ARM
  33 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
  34 index be58ada..52d59c1 100644
  35 --- a/drivers/usb/phy/Makefile
  36 +++ b/drivers/usb/phy/Makefile
  37 @@ -33,3 +33,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY)               += phy-rcar-gen2-usb.o
  38  obj-$(CONFIG_USB_ULPI)                 += phy-ulpi.o
  39  obj-$(CONFIG_USB_ULPI_VIEWPORT)                += phy-ulpi-viewport.o
  40  obj-$(CONFIG_KEYSTONE_USB_PHY)         += phy-keystone.o
  41 +obj-$(CONFIG_RALINK_USBPHY)            += ralink-phy.o
  42 diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
  43 new file mode 100644
  44 index 0000000..28046e5
  45 --- /dev/null
  46 +++ b/drivers/usb/phy/ralink-phy.c
  47 @@ -0,0 +1,190 @@
  48 +/*
  49 + * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
  50 + *
  51 + * based on: Renesas R-Car USB phy driver
  52 + *
  53 + * This program is free software; you can redistribute it and/or modify
  54 + * it under the terms of the GNU General Public License version 2 as
  55 + * published by the Free Software Foundation.
  56 + */
  57 +
  58 +#include <linux/delay.h>
  59 +#include <linux/io.h>
  60 +#include <linux/usb/otg.h>
  61 +#include <linux/of_platform.h>
  62 +#include <linux/platform_device.h>
  63 +#include <linux/spinlock.h>
  64 +#include <linux/module.h>
  65 +#include <linux/reset.h>
  66 +
  67 +#include <asm/mach-ralink/ralink_regs.h>
  68 +
  69 +#define RT_SYSC_REG_SYSCFG1            0x014
  70 +#define RT_SYSC_REG_CLKCFG1            0x030
  71 +#define RT_SYSC_REG_USB_PHY_CFG        0x05c
  72 +
  73 +#define RT_RSTCTRL_UDEV                BIT(25)
  74 +#define RT_RSTCTRL_UHST                BIT(22)
  75 +#define RT_SYSCFG1_USB0_HOST_MODE      BIT(10)
  76 +
  77 +#define MT7620_CLKCFG1_UPHY0_CLK_EN    BIT(25)
  78 +#define RT_CLKCFG1_UPHY1_CLK_EN        BIT(20)
  79 +#define RT_CLKCFG1_UPHY0_CLK_EN        BIT(18)
  80 +
  81 +#define USB_PHY_UTMI_8B60M             BIT(1)
  82 +#define UDEV_WAKEUP                    BIT(0)
  83 +
  84 +static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
  85 +static struct reset_control *rstdev;
  86 +static struct reset_control *rsthost;
  87 +static u32 phy_clk;
  88 +
  89 +static void usb_phy_enable(int state)
  90 +{
  91 +       if (state)
  92 +               rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
  93 +       else
  94 +               rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
  95 +       mdelay(100);
  96 +}
  97 +
  98 +static int usb_power_on(struct usb_phy *phy)
  99 +{
 100 +       if (atomic_inc_return(&usb_pwr_ref) == 1) {
 101 +               u32 t;
 102 +
 103 +               usb_phy_enable(1);
 104 +
 105 +//             reset_control_assert(rstdev);
 106 +//             reset_control_assert(rsthost);
 107 +
 108 +               if (OTG_STATE_B_HOST) {
 109 +                       rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
 110 +                       if (!IS_ERR(rsthost))
 111 +                               reset_control_deassert(rsthost);
 112 +               } else {
 113 +                       rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
 114 +                       if (!IS_ERR(rstdev))
 115 +                               reset_control_deassert(rstdev);
 116 +               }
 117 +               mdelay(100);
 118 +
 119 +               t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
 120 +               dev_info(phy->dev, "remote usb device wakeup %s\n",
 121 +                               (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
 122 +               if (t & USB_PHY_UTMI_8B60M)
 123 +                       dev_info(phy->dev, "UTMI 8bit 60MHz\n");
 124 +               else
 125 +                       dev_info(phy->dev, "UTMI 16bit 30MHz\n");
 126 +       }
 127 +
 128 +       return 0;
 129 +}
 130 +
 131 +static void usb_power_off(struct usb_phy *phy)
 132 +{
 133 +       if (atomic_dec_return(&usb_pwr_ref) == 0) {
 134 +               usb_phy_enable(0);
 135 +               if (!IS_ERR(rstdev))
 136 +                       reset_control_assert(rstdev);
 137 +               if (!IS_ERR(rsthost))
 138 +                       reset_control_assert(rsthost);
 139 +       }
 140 +}
 141 +
 142 +static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 143 +{
 144 +       otg->gadget = NULL;
 145 +       otg->host = host;
 146 +
 147 +       return 0;
 148 +}
 149 +
 150 +static int usb_set_peripheral(struct usb_otg *otg,
 151 +               struct usb_gadget *gadget)
 152 +{
 153 +       otg->host = NULL;
 154 +       otg->gadget = gadget;
 155 +
 156 +       return 0;
 157 +}
 158 +
 159 +static const struct of_device_id ralink_usbphy_dt_match[] = {
 160 +       { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
 161 +       { .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN },
 162 +       {},
 163 +};
 164 +MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
 165 +
 166 +static int usb_phy_probe(struct platform_device *pdev)
 167 +{
 168 +       const struct of_device_id *match;
 169 +       struct device *dev = &pdev->dev;
 170 +       struct usb_otg *otg;
 171 +       struct usb_phy *phy;
 172 +       int ret;
 173 +
 174 +       match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
 175 +       phy_clk = (int) match->data;
 176 +
 177 +       rsthost = devm_reset_control_get(&pdev->dev, "host");
 178 +       rstdev = devm_reset_control_get(&pdev->dev, "device");
 179 +
 180 +       phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 181 +       if (!phy) {
 182 +               dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
 183 +               return -ENOMEM;
 184 +       }
 185 +
 186 +       otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
 187 +       if (!otg) {
 188 +               dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
 189 +               return -ENOMEM;
 190 +       }
 191 +
 192 +       phy->dev = dev;
 193 +       phy->label = dev_name(dev);
 194 +       phy->init = usb_power_on;
 195 +       phy->shutdown = usb_power_off;
 196 +       otg->set_host = usb_set_host;
 197 +       otg->set_peripheral = usb_set_peripheral;
 198 +       otg->phy = phy;
 199 +       phy->otg = otg;
 200 +       ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
 201 +
 202 +       if (ret < 0) {
 203 +               dev_err(dev, "usb phy addition error\n");
 204 +               return ret;
 205 +       }
 206 +
 207 +       platform_set_drvdata(pdev, phy);
 208 +
 209 +       dev_info(&pdev->dev, "loaded\n");
 210 +
 211 +       return ret;
 212 +}
 213 +
 214 +static int usb_phy_remove(struct platform_device *pdev)
 215 +{
 216 +       struct usb_phy *phy = platform_get_drvdata(pdev);
 217 +
 218 +       usb_remove_phy(phy);
 219 +
 220 +       return 0;
 221 +}
 222 +
 223 +static struct platform_driver usb_phy_driver = {
 224 +       .driver         = {
 225 +               .owner  = THIS_MODULE,
 226 +               .name   = "rt3xxx-usbphy",
 227 +               .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
 228 +       },
 229 +       .probe          = usb_phy_probe,
 230 +       .remove         = usb_phy_remove,
 231 +};
 232 +
 233 +module_platform_driver(usb_phy_driver);
 234 +
 235 +MODULE_LICENSE("GPL v2");
 236 +MODULE_DESCRIPTION("Ralink USB phy");
 237 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
 238 --
 239 1.7.10.4
 240