ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-rt-g32-revb.c
1 /*
2  *  Asus RT-G32 rev B board support
3  *
4  *  Copyright (C) 2011 Sergiy <piratfm@gmail.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/spi/spi.h>
14 #include <linux/spi/flash.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/partitions.h>
17
18 #include <asm/mach-ralink/machine.h>
19 #include <asm/mach-ralink/dev-gpio-buttons.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define RT_G32B_GPIO_BUTTON_WPS         0       /* active low */
26 #define RT_G32B_GPIO_BUTTON_RESET       10      /* active low */
27
28 #define RT_G32B_BUTTONS_POLL_INTERVAL   20
29
30 static struct mtd_partition rt_g32b_partitions[] = {
31         {
32                 .name   = "u-boot",
33                 .offset = 0,
34                 .size   = 0x030000,
35                 .mask_flags = MTD_WRITEABLE,
36         }, {
37                 .name   = "devdata",
38                 .offset = 0x030000,
39                 .size   = 0x010000,
40                 .mask_flags = MTD_WRITEABLE,
41         }, {
42                 .name   = "devconf",
43                 .offset = 0x040000,
44                 .size   = 0x010000,
45                 .mask_flags = MTD_WRITEABLE,
46         }, {
47                 .name   = "kernel",
48                 .offset = 0x050000,
49                 .size   = 0x0d0000,
50         }, {
51                 .name   = "rootfs",
52                 .offset = 0x120000,
53                 .size   = 0x2e0000,
54         }, {
55                 .name   = "firmware",
56                 .offset = 0x050000,
57                 .size   = 0x3b0000,
58         }
59 };
60
61 const struct flash_platform_data rt_g32b_flash = {
62         .type           = "mx25l3205d",
63         .parts          = rt_g32b_partitions,
64         .nr_parts       = ARRAY_SIZE(rt_g32b_partitions),
65 };
66
67 struct spi_board_info __initdata rt_g32b_spi_slave_info[] = {
68         {
69                 .modalias       = "m25p80",
70                 .platform_data  = &rt_g32b_flash,
71                 .irq            = -1,
72                 .max_speed_hz   = 10000000,
73                 .bus_num        = 0,
74                 .chip_select    = 0,
75         },
76 };
77
78 static struct gpio_button rt_g32b_gpio_buttons[] __initdata = {
79         {
80                 .desc           = "reset",
81                 .type           = EV_KEY,
82                 .code           = KEY_RESTART,
83                 .threshold      = 3,
84                 .gpio           = RT_G32B_GPIO_BUTTON_RESET,
85                 .active_low     = 1,
86         }, {
87                 .desc           = "wps",
88                 .type           = EV_KEY,
89                 .code           = KEY_WPS_BUTTON,
90                 .threshold      = 3,
91                 .gpio           = RT_G32B_GPIO_BUTTON_WPS,
92                 .active_low     = 1,
93         }
94 };
95
96 static void __init rt_g32b_init(void)
97 {
98         rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
99         rt305x_register_spi(rt_g32b_spi_slave_info,
100                             ARRAY_SIZE(rt_g32b_spi_slave_info));
101
102         rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
103         rt305x_register_ethernet();
104         ramips_register_gpio_buttons(-1, RT_G32B_BUTTONS_POLL_INTERVAL,
105                                      ARRAY_SIZE(rt_g32b_gpio_buttons),
106                                      rt_g32b_gpio_buttons);
107         rt305x_register_wifi();
108         rt305x_register_wdt();
109 }
110
111 MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1",
112              rt_g32b_init);