ramips: fix argus board rootfs size
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-nbg-419n.c
1 /*
2  *  ZyXEL NBG-419N board support
3  *
4  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16
17 #include <asm/mach-ralink/machine.h>
18 #include <asm/mach-ralink/dev-gpio-buttons.h>
19 #include <asm/mach-ralink/dev-gpio-leds.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define NBG_419N_GPIO_LED_POWER         9
26 #define NBG_419N_GPIO_LED_WPS           14
27
28 #define NBG_419N_GPIO_BUTTON_WPS        0       /* active low */
29 #define NBG_419N_GPIO_BUTTON_RESET      10      /* active low */
30
31 #define NBG_419N_BUTTONS_POLL_INTERVAL  20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition nbg_419n_partitions[] = {
35         {
36                 .name   = "u-boot",
37                 .offset = 0,
38                 .size   = 0x030000,
39                 .mask_flags = MTD_WRITEABLE,
40         }, {
41                 .name   = "config",
42                 .offset = 0x030000,
43                 .size   = 0x010000,
44                 .mask_flags = MTD_WRITEABLE,
45         }, {
46                 .name   = "factory",
47                 .offset = 0x040000,
48                 .size   = 0x010000,
49                 .mask_flags = MTD_WRITEABLE,
50         }, {
51                 .name   = "kernel",
52                 .offset = 0x050000,
53                 .size   = 0x3b0000,
54         }
55 };
56 #endif /* CONFIG_MTD_PARTITIONS */
57
58 static struct physmap_flash_data nbg_419n_flash_data = {
59 #ifdef CONFIG_MTD_PARTITIONS
60         .nr_parts       = ARRAY_SIZE(nbg_419n_partitions),
61         .parts          = nbg_419n_partitions,
62 #endif
63 };
64
65 static struct gpio_led nbg_419n_leds_gpio[] __initdata = {
66         {
67                 .name           = "nbg-419n:green:power",
68                 .gpio           = NBG_419N_GPIO_LED_POWER,
69                 .active_low     = 1,
70         }, {
71                 .name           = "nbg-419n:green:wps",
72                 .gpio           = NBG_419N_GPIO_LED_WPS,
73                 .active_low     = 1,
74         }
75 };
76
77 static struct gpio_button nbg_419n_gpio_buttons[] __initdata = {
78         {
79                 .desc           = "reset",
80                 .type           = EV_KEY,
81                 .code           = KEY_RESTART,
82                 .threshold      = 3,
83                 .gpio           = NBG_419N_GPIO_BUTTON_RESET,
84                 .active_low     = 1,
85         }, {
86                 .desc           = "wps",
87                 .type           = EV_KEY,
88                 .code           = KEY_WPS_BUTTON,
89                 .threshold      = 3,
90                 .gpio           = NBG_419N_GPIO_BUTTON_WPS,
91                 .active_low     = 1,
92         }
93 };
94
95 static void __init nbg_419n_init(void)
96 {
97         rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
98
99         rt305x_register_flash(0, &nbg_419n_flash_data);
100         rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
101         rt305x_register_ethernet();
102         ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio),
103                                   nbg_419n_leds_gpio);
104         ramips_register_gpio_buttons(-1, NBG_419N_BUTTONS_POLL_INTERVAL,
105                                      ARRAY_SIZE(nbg_419n_gpio_buttons),
106                                      nbg_419n_gpio_buttons);
107         rt305x_register_wifi();
108         rt305x_register_wdt();
109 }
110
111 MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init);