target/linux/ramips/dts/WCR150GN.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WCR150GN", "ralink,rt3052-soc";
   7         model = "Sparklan WCR-150GN";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19         };
  20
  21         cfi@1f000000 {
  22                 compatible = "cfi-flash";
  23                 reg = <0x1f000000 0x800000>;
  24
  25                 bank-width = <2>;
  26                 device-width = <2>;
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29
  30                 partition@0 {
  31                         label = "u-boot";
  32                         reg = <0x0 0x30000>;
  33                         read-only;
  34                 };
  35
  36                 partition@30000 {
  37                         label = "u-boot-env";
  38                         reg = <0x30000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 factory: partition@40000 {
  43                         label = "factory";
  44                         reg = <0x40000 0x10000>;
  45                         read-only;
  46                 };
  47
  48                 partition@50000 {
  49                         label = "firmware";
  50                         reg = <0x50000 0x3b0000>;
  51                 };
  52         };
  53
  54         gpio-leds {
  55                 compatible = "gpio-leds";
  56                 user {
  57                         label = "wcr150gn:amber:user";
  58                         gpios = <&gpio0 12 1>;
  59                 };
  60                 power {
  61                         label = "wcr150gn:amber:power";
  62                         gpios = <&gpio0 8 1>;
  63                 };
  64         };
  65
  66         gpio-keys-polled {
  67                 compatible = "gpio-keys-polled";
  68                 #address-cells = <1>;
  69                 #size-cells = <0>;
  70                 poll-interval = <20>;
  71                 wps {
  72                         label = "wps";
  73                         gpios = <&gpio0 10 1>;
  74                         linux,code = <0x211>;
  75                 };
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 0 1>;
  79                         linux,code = <0x198>;
  80                 };
  81         };
  82
  83         ethernet@10100000 {
  84                 status = "okay";
  85         };
  86
  87         esw@10110000 {
  88                 status = "okay";
  89                 ralink,portmap = <0x2f>;
  90         };
  91
  92         wmac@10180000 {
  93                 status = "okay";
  94         };
  95
  96         otg@101c0000 {
  97                 status = "okay";
  98         };
  99 };