target/linux/ramips/dts/OMNI-EMB.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "OMNI-EMB", "ralink,rt3052-soc";
   7         model = "Omnima MiniEMBWiFi";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23         };
  24
  25         gpio-leds {
  26                 compatible = "gpio-leds";
  27                 status {
  28                         label = "emb:green:status";
  29                         gpios = <&gpio0 9 1>;
  30                 };
  31                 wlan {
  32                         label = "emb:green:wlan";
  33                         gpios = <&gpio0 14 1>;
  34                 };
  35         };
  36
  37         gpio-keys-polled {
  38                 compatible = "gpio-keys-polled";
  39                 #address-cells = <1>;
  40                 #size-cells = <0>;
  41                 poll-interval = <20>;
  42                 reset {
  43                         label = "reset";
  44                         gpios = <&gpio0 12 1>;
  45                         linux,code = <0x198>;
  46                 };
  47         };
  48
  49         cfi@1f000000 {
  50                 compatible = "cfi-flash";
  51                 reg = <0x1f000000 0x800000>;
  52
  53                 bank-width = <2>;
  54                 device-width = <2>;
  55                 #address-cells = <1>;
  56                 #size-cells = <1>;
  57
  58                 partition@0 {
  59                         label = "u-boot";
  60                         reg = <0x0 0x30000>;
  61                         read-only;
  62                 };
  63
  64                 partition@30000 {
  65                         label = "u-boot-env";
  66                         reg = <0x30000 0x10000>;
  67                         read-only;
  68                 };
  69
  70                 factory: partition@40000 {
  71                         label = "factory";
  72                         reg = <0x40000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 partition@50000 {
  77                         label = "firmware";
  78                         reg = <0x50000 0x7b0000>;
  79                 };
  80         };
  81
  82         ethernet@10100000 {
  83                 status = "okay";
  84         };
  85
  86         esw@10110000 {
  87                 status = "okay";
  88                 ralink,portmap = <0x2f>;
  89         };
  90
  91         wmac@10180000 {
  92                 status = "okay";
  93         };
  94
  95         otg@101c0000 {
  96                 status = "okay";
  97         };
  98 };