target/linux/ramips/dts/OMNI-EMB.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "OMNI-EMB", "ralink,rt3052-soc";
   7         model = "Omnima MiniEMBWiFi";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23                 status {
  24                         label = "emb:green:status";
  25                         gpios = <&gpio0 9 1>;
  26                 };
  27                 wlan {
  28                         label = "emb:green:wlan";
  29                         gpios = <&gpio0 14 1>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio0 12 1>;
  41                         linux,code = <0x198>;
  42                 };
  43         };
  44
  45         cfi@1f000000 {
  46                 compatible = "cfi-flash";
  47                 reg = <0x1f000000 0x800000>;
  48
  49                 bank-width = <2>;
  50                 device-width = <2>;
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x7b0000>;
  75                 };
  76         };
  77
  78         ethernet@10100000 {
  79                 status = "okay";
  80         };
  81
  82         esw@10110000 {
  83                 status = "okay";
  84                 ralink,portmap = <0x2f>;
  85         };
  86
  87         wmac@10180000 {
  88                 status = "okay";
  89         };
  90
  91         otg@101c0000 {
  92                 status = "okay";
  93         };
  94 };