target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7621.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
   7         model = "D-Link DIR-860L B1";
   8
   9         memory@0 {
  10                 reg = <0x0 0x8000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600";
  15         };
  16
  17         palmbus@1E000000 {
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "mx25l12805d";
  25                                 reg = <0 0>;
  26                                 linux,modalias = "m25p80";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "u-boot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "u-boot-env";
  37                                         reg = <0x30000 0x4000>;
  38                                         read-only;
  39                                 };
  40
  41                                 radio: partition@34000 {
  42                                         label = "radio";
  43                                         reg = <0x34000 0x4000>;
  44                                         read-only;
  45                                 };
  46
  47                                 factory: partition@38000 {
  48                                         label = "factory";
  49                                         reg = <0x38000 0x8000>;
  50                                         read-only;
  51                                 };
  52
  53                                 partition@40000 {
  54                                         label = "defaults";
  55                                         reg = <0x40000 0x10000>;
  56                                         read-only;
  57                                 };
  58
  59                                 partition@50000 {
  60                                         label = "firmware";
  61                                         reg = <0x50000 0xfb0000>;
  62                                 };
  63                         };
  64                 };
  65         };
  66
  67         pcie@1e140000 {
  68                 status = "okay";
  69
  70                 pcie0 {
  71                         mt76@0,0 {
  72                                 reg = <0x0000 0 0 0 0>;
  73                                 device_type = "pci";
  74                                 mediatek,mtd-eeprom = <&radio 0>;
  75                                 mediatek,2ghz = <0>;
  76                         };
  77                 };
  78                 pcie1 {
  79                         mt76@1,0 {
  80                                 reg = <0x0000 0 0 0 0>;
  81                                 device_type = "pci";
  82                                 mediatek,mtd-eeprom = <&radio 0x2000>;
  83                                 mediatek,5ghz = <0>;
  84                         };
  85                 };
  86         };
  87
  88         pinctrl {
  89                 state_default: pinctrl0 {
  90                         gpio {
  91                                 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
  92                                 ralink,function = "gpio";
  93                         };
  94                 };
  95         };
  96
  97         gpio-leds {
  98                 compatible = "gpio-leds";
  99         };
 100
 101         gpio-keys-polled {
 102                 compatible = "gpio-keys-polled";
 103                 #address-cells = <1>;
 104                 #size-cells = <0>;
 105                 poll-interval = <20>;
 106         };
 107 };