ralink: Add support for samsung cy-swr1100 wireless router
[openwrt.git] / target / linux / ramips / dts / CY-SWR1100.dts
1 /dts-v1/;
2
3 /include/ "rt3883.dtsi"
4
5 / {
6         compatible = "CY-SWR1100", "ralink,rt3883-soc";
7         model = "Samsung CY-SWR1100";
8
9         palmbus@10000000 {
10                 gpio1: gpio@638 {
11                         status = "okay";
12                 };
13         };
14
15         pinctrl {
16                 state_default: pinctrl0 {
17                         gpio {
18                                 ralink,group = "i2c", "spi";
19                                 ralink,function = "gpio";
20                         };
21                 };
22         };
23
24         ethernet@10100000 {
25                 mtd-mac-address = <&factory 0x66>;
26                 port@0 {
27                         ralink,fixed-link = <1000 1 1 1>;
28                 };
29         };
30
31         pci@10140000 {
32                 status = "okay";
33
34                 pinctrl-names = "default";
35                 pinctrl-0 = <&pci_pins>;
36                 pci_pins: pci {
37                         pci {
38                                 ralink,group = "pci";
39                                 ralink,function = "pci-fnc";
40                         };
41                 };
42
43                 host-bridge {
44                         pci-bridge@1 {
45                                 status = "okay";
46                         };
47                 };
48         };
49
50         wmac@10180000 {
51                 status = "okay";
52         };
53
54         ehci@101c0000 {
55                 status = "okay";
56         };
57
58         ohci@101c1000 {
59                 status = "okay";
60         };
61
62         nor-flash@1c000000 {
63                 compatible = "cfi-flash";
64                 reg = <0x1c000000 0x800000>;
65
66                 bank-width = <2>;
67                 #address-cells = <1>;
68                 #size-cells = <1>;
69
70                 partition@0 {
71                         label = "uboot";
72                         reg = <0x0 0x30000>;
73                         read-only;
74                 };
75                 partition@30000 {
76                         label = "uboot-env";
77                         reg = <0x30000 0x4000>;
78                         read-only;
79                 };
80                 factory: partition@34000 {
81                         label = "factory";
82                         reg = <0x34000 0x4000>;
83                         read-only;
84                 };
85                 partition@38000 {
86                         label = "nvram";
87                         reg = <0x38000 0x8000>;
88                         read-only;
89                 };
90                 partition@40000 {
91                         label = "devdata";
92                         reg = <0x40000 0x10000>;
93                 };
94                 partition@50000 {
95                         label = "firmware";
96                         reg = <0x50000 0x7b0000>;
97                 };
98         };
99
100         rtl8367 {
101                 compatible = "realtek,rtl8367";
102                 gpio-sda = <&gpio0 1 0>;
103                 gpio-sck = <&gpio0 2 0>;
104                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
105         };
106
107         gpio-keys-polled {
108                 compatible = "gpio-keys-polled";
109                 #address-cells = <1>;
110                 #size-cells = <0>;
111                 poll-interval = <100>;
112                 reset {
113                         label = "reset";
114                         gpios = <&gpio0 6 1>;
115                         linux,code = <0x198>;
116                 };
117                 wps {
118                         label = "wps";
119                         gpios = <&gpio0 3 1>;
120                         linux,code = <0x211>;
121                 };
122         };
123
124         gpio-leds {
125                 compatible = "gpio-leds";
126                 wps {
127                         label = "samsung:blue:wps";
128                         gpios = <&gpio0 0 1>;
129                 };
130                 usb {
131                         label = "samsung:blue:usb";
132                         gpios = <&gpio1 1 1>;
133                 };
134         };
135 };