target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch

   1 ---
   2  arch/arm/mach-omap2/board-n8x0.c |   13 +
   3  drivers/cbus/Kconfig             |   12 +
   4  drivers/cbus/Makefile            |    3
   5  drivers/cbus/lipocharge.c        |   63 ++++++
   6  drivers/cbus/lipocharge.h        |   50 ++++
   7  drivers/cbus/n810bm_main.c       |  397 +++++++++++++++++++++++++++++++++++++++
   8  drivers/cbus/retu.c              |    4
   9  drivers/cbus/retu.h              |    3
  10  drivers/cbus/tahvo.h             |    6
  11  9 files changed, 548 insertions(+), 3 deletions(-)
  12
  13 Index: linux-2.6.37/drivers/cbus/Kconfig
  14 ===================================================================
  15 --- linux-2.6.37.orig/drivers/cbus/Kconfig      2011-01-28 22:33:39.703215389 +0100
  16 +++ linux-2.6.37/drivers/cbus/Kconfig   2011-01-28 23:41:57.094298060 +0100
  17 @@ -94,4 +94,12 @@
  18           to Retu/Vilma. Detection state and events are exposed through
  19           sysfs.
  20
  21 +config N810BM
  22 +       depends on CBUS_RETU && CBUS_TAHVO
  23 +       tristate "Nokia n810 battery management"
  24 +       ---help---
  25 +         Nokia n810 device battery management.
  26 +
  27 +         If unsure, say N.
  28 +
  29  endmenu
  30 Index: linux-2.6.37/drivers/cbus/Makefile
  31 ===================================================================
  32 --- linux-2.6.37.orig/drivers/cbus/Makefile     2011-01-28 22:33:39.694216931 +0100
  33 +++ linux-2.6.37/drivers/cbus/Makefile  2011-01-28 22:33:39.754206648 +0100
  34 @@ -12,3 +12,6 @@
  35  obj-$(CONFIG_CBUS_TAHVO_USER)  += tahvo-user.o
  36  obj-$(CONFIG_CBUS_RETU_USER)   += retu-user.o
  37  obj-$(CONFIG_CBUS_RETU_HEADSET)        += retu-headset.o
  38 +n810bm-y                       += n810bm_main.o
  39 +n810bm-y                       += lipocharge.o
  40 +obj-$(CONFIG_N810BM)           += n810bm.o
  41 Index: linux-2.6.37/drivers/cbus/n810bm_main.c
  42 ===================================================================
  43 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
  44 +++ linux-2.6.37/drivers/cbus/n810bm_main.c     2011-01-28 23:41:23.510064352 +0100
  45 @@ -0,0 +1,562 @@
  46 +/*
  47 + *   Nokia n810 battery management
  48 + *
  49 + *   WARNING: This driver is based on unconfirmed documentation.
  50 + *            It is possibly dangerous to use this software.
  51 + *            Use this software at your own risk!
  52 + *
  53 + *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
  54 + *
  55 + *   This program is free software; you can redistribute it and/or
  56 + *   modify it under the terms of the GNU General Public License
  57 + *   as published by the Free Software Foundation; either version 2
  58 + *   of the License, or (at your option) any later version.
  59 + *
  60 + *   This program is distributed in the hope that it will be useful,
  61 + *   but WITHOUT ANY WARRANTY; without even the implied warranty of
  62 + *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  63 + *   GNU General Public License for more details.
  64 + */
  65 +
  66 +#include <linux/module.h>
  67 +#include <linux/device.h>
  68 +#include <linux/platform_device.h>
  69 +#include <linux/slab.h>
  70 +#include <linux/spinlock.h>
  71 +#include <linux/timer.h>
  72 +#include <linux/reboot.h>
  73 +
  74 +#include "retu.h"
  75 +#include "tahvo.h"
  76 +#include "lipocharge.h"
  77 +
  78 +
  79 +#define N810BM_CHECK_INTERVAL          (HZ * 5)
  80 +#define N810BM_MIN_VOLTAGE_THRES       3300 /* Absolute minimum voltage threshold */
  81 +
  82 +
  83 +/* RETU_ADC_BSI
  84 + * The battery size indicator ADC measures the resistance between
  85 + * the battery BSI pin and ground. This is used to detect the battery
  86 + * capacity, as the BSI resistor is related to capacity.
  87 + *
  88 + * Manually measured lookup table.
  89 + * Hard to measure, thus not very accurate.
  90 + *
  91 + * Resistance  |  ADC value
  92 + * ========================
  93 + * 120k        |  0x3AC
  94 + * 110k        |  0x37C
  95 + * 100k        |  0x351
  96 + *  90k        |  0x329
  97 + */
  98 +
  99 +/* RETU_ADC_BATTVOLT
 100 + * Manually measured lookup table.
 101 + * Hard to measure, thus not very accurate.
 102 + *
 103 + * Voltage  |  ADC value
 104 + * =====================
 105 + * 2.80V    |  0x037
 106 + * 2.90V    |  0x05E
 107 + * 3.00V    |  0x090
 108 + * 3.10V    |  0x0A4
 109 + * 3.20V    |  0x0CC
 110 + * 3.30V    |  0x0EF
 111 + * 3.40V    |  0x115
 112 + * 3.50V    |  0x136
 113 + * 3.60V    |  0x15C
 114 + * 3.70V    |  0x187
 115 + * 3.80V    |  0x1A5
 116 + * 3.90V    |  0x1C9
 117 + * 4.00V    |  0x1ED
 118 + * 4.10V    |  0x212
 119 + * 4.20V    |  0x236
 120 + */
 121 +
 122 +
 123 +enum n810bm_capacity {
 124 +       N810BM_CAP_UNKNOWN      = 0,
 125 +       N810BM_CAP_1500MAH      = 1500, /* 1500 mAh battery */
 126 +};
 127 +
 128 +struct n810bm {
 129 +       struct platform_device *pdev;
 130 +
 131 +       enum n810bm_capacity capacity;
 132 +       struct timer_list check_timer;
 133 +
 134 +       struct lipocharge *charger;
 135 +
 136 +       spinlock_t lock;
 137 +};
 138 +
 139 +
 140 +static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
 141 +static void n810bm_emergency(struct n810bm *bm, const char *message)
 142 +{
 143 +       printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
 144 +       /* Force a hard shutdown. */
 145 +       machine_power_off();
 146 +       panic("n810bm: Failed to halt machine in emergency state\n");
 147 +}
 148 +
 149 +#if 0
 150 +static u16 retu_read(struct n810bm *bm, unsigned int reg)
 151 +{
 152 +       int ret;
 153 +       unsigned long flags;
 154 +
 155 +       spin_lock_irqsave(&retu_lock, flags);
 156 +       ret = retu_read_reg(reg);
 157 +       spin_unlock_irqrestore(&retu_lock, flags);
 158 +       if (ret < 0 || ret > 0xFFFF)
 159 +               n810bm_emergency(bm, "retu_read");
 160 +
 161 +       return ret;
 162 +}
 163 +#endif
 164 +
 165 +static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
 166 +{
 167 +       int ret;
 168 +       unsigned long flags;
 169 +       u16 value;
 170 +
 171 +       spin_lock_irqsave(&retu_lock, flags);
 172 +       if (~mask) {
 173 +               ret = retu_read_reg(reg);
 174 +               if (ret < 0 || ret > 0xFFFF)
 175 +                       goto fatal_unlock;
 176 +               value = ret;
 177 +       } else
 178 +               value = 0;
 179 +       value &= ~mask;
 180 +       value |= set;
 181 +       ret = retu_write_reg(reg, value);
 182 +       if (ret)
 183 +               goto fatal_unlock;
 184 +       spin_unlock_irqrestore(&retu_lock, flags);
 185 +
 186 +       return;
 187 +
 188 +fatal_unlock:
 189 +       spin_unlock_irqrestore(&retu_lock, flags);
 190 +       n810bm_emergency(bm, "retu_maskset");
 191 +}
 192 +
 193 +static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
 194 +{
 195 +       return retu_maskset(bm, reg, 0xFFFF, value);
 196 +}
 197 +
 198 +static int retu_adc_average(struct n810bm *bm, unsigned int chan,
 199 +                           unsigned int nr_passes)
 200 +{
 201 +       unsigned int i, value = 0;
 202 +       int ret;
 203 +
 204 +       if (WARN_ON(!nr_passes))
 205 +               return 0;
 206 +       for (i = 0; i < nr_passes; i++) {
 207 +               ret = retu_read_adc(chan);
 208 +               if (ret < 0)
 209 +                       return ret;
 210 +               value += ret;
 211 +       }
 212 +       value /= nr_passes;
 213 +
 214 +       return value;
 215 +}
 216 +
 217 +static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
 218 +{
 219 +       int value;
 220 +
 221 +       value = retu_read_adc(channel);
 222 +       if (value < 0) {
 223 +               dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
 224 +                       channel);
 225 +               return -EIO;
 226 +       }
 227 +       dev_info(&bm->pdev->dev,
 228 +                "GND ADC channel %u sanity check got value: %d",
 229 +                channel, value);
 230 +       if (value > 5) {
 231 +               n810bm_emergency(bm, "GND ADC sanity check failed");
 232 +               return -EIO;
 233 +       }
 234 +
 235 +       return 0;
 236 +}
 237 +
 238 +static int n810bm_check_adc_sanity(struct n810bm *bm)
 239 +{
 240 +       int err;
 241 +
 242 +       /* Discard one conversion */
 243 +       retu_write(bm, RETU_REG_ADCSCR, 0);
 244 +       retu_read_adc(RETU_ADC_GND2);
 245 +
 246 +       err = adc_sanity_check(bm, RETU_ADC_GND2);
 247 +       if (err)
 248 +               return err;
 249 +
 250 +       return 0;
 251 +}
 252 +
 253 +/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
 254 +static int n810bm_measure_batt_voltage(struct n810bm *bm)
 255 +{
 256 +       int adc;
 257 +       unsigned int mv;
 258 +       const unsigned int scale = 1000;
 259 +
 260 +       adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
 261 +       if (adc < 0)
 262 +               return adc;
 263 +       if (adc <= 0x37)
 264 +               return 2800;
 265 +       mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
 266 +
 267 +       return mv;
 268 +}
 269 +
 270 +/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
 271 +static int n810bm_measure_charger_voltage(struct n810bm *bm)
 272 +{
 273 +       int adc;
 274 +       unsigned int mv;
 275 +
 276 +       adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
 277 +       if (adc < 0)
 278 +               return adc;
 279 +       //TODO convert to mV
 280 +       mv = adc;
 281 +
 282 +       return mv;
 283 +}
 284 +
 285 +/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
 286 +static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
 287 +{
 288 +       int adc;
 289 +       unsigned int mv;
 290 +
 291 +       adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
 292 +       if (adc < 0)
 293 +               return adc;
 294 +       //TODO convert to mV
 295 +       mv = adc;
 296 +
 297 +       return mv;
 298 +}
 299 +
 300 +/* Measure the battery temperature. Returns the value in K (or negative value on error). */
 301 +static int n810bm_measure_batt_temp(struct n810bm *bm)
 302 +{
 303 +       int adc;
 304 +       unsigned int k;
 305 +
 306 +       adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
 307 +       if (adc < 0)
 308 +               return adc;
 309 +       //TODO convert to K
 310 +       k = adc;
 311 +
 312 +       return k;
 313 +}
 314 +
 315 +/* Read the battery capacity via BSI pin. */
 316 +static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
 317 +{
 318 +       int adc;
 319 +       const unsigned int hyst = 20;
 320 +
 321 +       adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
 322 +       if (adc < 0) {
 323 +               dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
 324 +               return N810BM_CAP_UNKNOWN;
 325 +       }
 326 +
 327 +       if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
 328 +               return N810BM_CAP_1500MAH;
 329 +
 330 +       dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
 331 +
 332 +       return N810BM_CAP_UNKNOWN;
 333 +}
 334 +
 335 +/* Convert a battery voltage (in mV) to percentage. */
 336 +static unsigned int n810bm_mvolt2percent(unsigned int mv)
 337 +{
 338 +       const unsigned int minv = 3700;
 339 +       const unsigned int maxv = 4150;
 340 +       unsigned int percent;
 341 +
 342 +       mv = clamp(mv, minv, maxv);
 343 +       percent = (mv - minv) * 100 / (maxv - minv);
 344 +
 345 +       return percent;
 346 +}
 347 +
 348 +static void n810bm_check_timer(unsigned long data)
 349 +{
 350 +       struct n810bm *bm = (struct n810bm *)data;
 351 +       unsigned long flags;
 352 +       int mv;
 353 +
 354 +       spin_lock_irqsave(&bm->lock, flags);
 355 +
 356 +       mv = n810bm_measure_batt_voltage(bm);
 357 +       if (mv < 0)
 358 +               n810bm_emergency(bm, "check timer: Failed to measure");
 359 +       if (mv < N810BM_MIN_VOLTAGE_THRES)
 360 +               n810bm_emergency(bm, "check timer: Minimum voltage threshold reached");
 361 +
 362 +       mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
 363 +       spin_unlock_irqrestore(&bm->lock, flags);
 364 +
 365 +       return;
 366 +}
 367 +
 368 +static void n810bm_adc_irq_handler(unsigned long data)
 369 +{
 370 +//     struct n810bm *bm = (struct n810bm *)data;
 371 +
 372 +       retu_ack_irq(RETU_INT_ADCS);
 373 +       //TODO
 374 +printk("n810bm: ADC timer triggered\n");
 375 +}
 376 +
 377 +static ssize_t n810bm_attr_charge_show(struct device *dev,
 378 +                                      struct device_attribute *attr,
 379 +                                      char *buf)
 380 +{
 381 +       struct platform_device *pdev = to_platform_device(dev);
 382 +       struct n810bm *bm = platform_get_drvdata(pdev);
 383 +       int err = -ENODEV;
 384 +       ssize_t count = 0;
 385 +       int millivolt;
 386 +
 387 +       spin_lock_irq(&bm->lock);
 388 +       millivolt = n810bm_measure_batt_voltage(bm);
 389 +       if (millivolt >= 0) {
 390 +               count = snprintf(buf, PAGE_SIZE, "%u\n",
 391 +                                n810bm_mvolt2percent(millivolt));
 392 +               err = 0;
 393 +       }
 394 +       spin_unlock_irq(&bm->lock);
 395 +
 396 +       return err ? err : count;
 397 +}
 398 +static DEVICE_ATTR(batt_charge, 0444, n810bm_attr_charge_show, NULL);
 399 +
 400 +static ssize_t n810bm_attr_capacity_show(struct device *dev,
 401 +                                        struct device_attribute *attr,
 402 +                                        char *buf)
 403 +{
 404 +       struct platform_device *pdev = to_platform_device(dev);
 405 +       struct n810bm *bm = platform_get_drvdata(pdev);
 406 +       ssize_t count;
 407 +
 408 +       spin_lock_irq(&bm->lock);
 409 +       count = snprintf(buf, PAGE_SIZE, "%u\n",
 410 +                        (unsigned int)bm->capacity);
 411 +       spin_unlock_irq(&bm->lock);
 412 +
 413 +       return count;
 414 +}
 415 +static DEVICE_ATTR(batt_capacity, 0444, n810bm_attr_capacity_show, NULL);
 416 +
 417 +static ssize_t n810bm_attr_battemp_show(struct device *dev,
 418 +                                       struct device_attribute *attr,
 419 +                                       char *buf)
 420 +{
 421 +       struct platform_device *pdev = to_platform_device(dev);
 422 +       struct n810bm *bm = platform_get_drvdata(pdev);
 423 +       ssize_t count = 0;
 424 +       int k, err = -ENODEV;
 425 +
 426 +       spin_lock_irq(&bm->lock);
 427 +       k = n810bm_measure_batt_temp(bm);
 428 +       if (k >= 0) {
 429 +               count = snprintf(buf, PAGE_SIZE, "%d\n", k);
 430 +               err = 0;
 431 +       }
 432 +       spin_unlock_irq(&bm->lock);
 433 +
 434 +       return err ? err : count;
 435 +}
 436 +static DEVICE_ATTR(batt_temp, 0444, n810bm_attr_battemp_show, NULL);
 437 +
 438 +static ssize_t n810bm_attr_charger_voltage(struct device *dev,
 439 +                                          struct device_attribute *attr,
 440 +                                          char *buf)
 441 +{
 442 +       struct platform_device *pdev = to_platform_device(dev);
 443 +       struct n810bm *bm = platform_get_drvdata(pdev);
 444 +       ssize_t count = 0;
 445 +       int mv, err = -ENODEV;
 446 +
 447 +       spin_lock_irq(&bm->lock);
 448 +       mv = n810bm_measure_charger_voltage(bm);
 449 +       if (mv >= 0) {
 450 +               count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
 451 +               err = 0;
 452 +       }
 453 +       spin_unlock_irq(&bm->lock);
 454 +
 455 +       return err ? err : count;
 456 +}
 457 +static DEVICE_ATTR(charger_voltage, 0444, n810bm_attr_charger_voltage, NULL);
 458 +
 459 +static ssize_t n810bm_attr_backup_batt_voltage(struct device *dev,
 460 +                                              struct device_attribute *attr,
 461 +                                              char *buf)
 462 +{
 463 +       struct platform_device *pdev = to_platform_device(dev);
 464 +       struct n810bm *bm = platform_get_drvdata(pdev);
 465 +       ssize_t count = 0;
 466 +       int mv, err = -ENODEV;
 467 +
 468 +       spin_lock_irq(&bm->lock);
 469 +       mv = n810bm_measure_backup_batt_voltage(bm);
 470 +       if (mv >= 0) {
 471 +               count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
 472 +               err = 0;
 473 +       }
 474 +       spin_unlock_irq(&bm->lock);
 475 +
 476 +       return err ? err : count;
 477 +}
 478 +static DEVICE_ATTR(backup_batt_voltage, 0444, n810bm_attr_backup_batt_voltage, NULL);
 479 +
 480 +static void n810bm_hw_exit(struct n810bm *bm)
 481 +{
 482 +       retu_write(bm, RETU_REG_ADCSCR, 0);
 483 +}
 484 +
 485 +static int n810bm_hw_init(struct n810bm *bm)
 486 +{
 487 +       int err;
 488 +
 489 +       err = n810bm_check_adc_sanity(bm);
 490 +       if (err)
 491 +               goto error;
 492 +       bm->capacity = n810bm_read_batt_capacity(bm);
 493 +       if (bm->capacity == N810BM_CAP_UNKNOWN) {
 494 +               dev_err(&bm->pdev->dev, "Unknown battery detected");
 495 +               err = -ENODEV;
 496 +               goto error;
 497 +       }
 498 +       dev_info(&bm->pdev->dev, "Detected %u mAh battery\n",
 499 +                (unsigned int)bm->capacity);
 500 +
 501 +       return 0;
 502 +
 503 +error:
 504 +       return err;
 505 +}
 506 +
 507 +static int __devinit n810bm_probe(struct platform_device *pdev)
 508 +{
 509 +       struct n810bm *bm;
 510 +       int err;
 511 +
 512 +       bm = kzalloc(sizeof(*bm), GFP_KERNEL);
 513 +       if (!bm)
 514 +               return -ENOMEM;
 515 +       bm->pdev = pdev;
 516 +       platform_set_drvdata(pdev, bm);
 517 +       spin_lock_init(&bm->lock);
 518 +       setup_timer(&bm->check_timer, n810bm_check_timer, (unsigned long)bm);
 519 +
 520 +       err = n810bm_hw_init(bm);
 521 +       if (err)
 522 +               goto err_free;
 523 +       err = device_create_file(&pdev->dev, &dev_attr_batt_charge);
 524 +       if (err)
 525 +               goto err_exit;
 526 +       err = device_create_file(&pdev->dev, &dev_attr_batt_capacity);
 527 +       if (err)
 528 +               goto err_rem_charge;
 529 +       err = device_create_file(&pdev->dev, &dev_attr_batt_temp);
 530 +       if (err)
 531 +               goto err_rem_capa;
 532 +       err = device_create_file(&pdev->dev, &dev_attr_charger_voltage);
 533 +       if (err)
 534 +               goto err_rem_temp;
 535 +       err = device_create_file(&pdev->dev, &dev_attr_backup_batt_voltage);
 536 +       if (err)
 537 +               goto err_rem_chg;
 538 +       err = retu_request_irq(RETU_INT_ADCS, n810bm_adc_irq_handler,
 539 +                              (unsigned long)bm, "n810bm");
 540 +       if (err)
 541 +               goto err_rem_bkup;
 542 +
 543 +       mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
 544 +
 545 +       dev_info(&pdev->dev, "Battery management initialized");
 546 +
 547 +       return 0;
 548 +
 549 +err_rem_bkup:
 550 +       device_remove_file(&pdev->dev, &dev_attr_backup_batt_voltage);
 551 +err_rem_chg:
 552 +       device_remove_file(&pdev->dev, &dev_attr_charger_voltage);
 553 +err_rem_temp:
 554 +       device_remove_file(&pdev->dev, &dev_attr_batt_temp);
 555 +err_rem_capa:
 556 +       device_remove_file(&pdev->dev, &dev_attr_batt_capacity);
 557 +err_rem_charge:
 558 +       device_remove_file(&pdev->dev, &dev_attr_batt_charge);
 559 +err_exit:
 560 +       n810bm_hw_exit(bm);
 561 +err_free:
 562 +       kfree(bm);
 563 +       platform_set_drvdata(pdev, NULL);
 564 +       return err;
 565 +}
 566 +
 567 +static int __devexit n810bm_remove(struct platform_device *pdev)
 568 +{
 569 +       struct n810bm *bm = platform_get_drvdata(pdev);
 570 +
 571 +       retu_free_irq(RETU_INT_ADCS);
 572 +       del_timer_sync(&bm->check_timer);
 573 +       device_remove_file(&pdev->dev, &dev_attr_backup_batt_voltage);
 574 +       device_remove_file(&pdev->dev, &dev_attr_charger_voltage);
 575 +       device_remove_file(&pdev->dev, &dev_attr_batt_temp);
 576 +       device_remove_file(&pdev->dev, &dev_attr_batt_capacity);
 577 +       device_remove_file(&pdev->dev, &dev_attr_batt_charge);
 578 +       n810bm_hw_exit(bm);
 579 +
 580 +       kfree(bm);
 581 +       platform_set_drvdata(pdev, NULL);
 582 +
 583 +       return 0;
 584 +}
 585 +
 586 +static struct platform_driver n810bm_driver = {
 587 +       .remove         = __devexit_p(n810bm_remove),
 588 +       .driver         = {
 589 +               .name   = "n810bm",
 590 +       }
 591 +};
 592 +
 593 +static int __init n810bm_modinit(void)
 594 +{
 595 +       return platform_driver_probe(&n810bm_driver, n810bm_probe);
 596 +}
 597 +module_init(n810bm_modinit);
 598 +
 599 +static void __exit n810bm_modexit(void)
 600 +{
 601 +       platform_driver_unregister(&n810bm_driver);
 602 +}
 603 +module_exit(n810bm_modexit);
 604 +
 605 +MODULE_DESCRIPTION("Nokia n810 battery management");
 606 +MODULE_LICENSE("GPL");
 607 +MODULE_AUTHOR("Michael Buesch");
 608 Index: linux-2.6.37/drivers/cbus/retu.c
 609 ===================================================================
 610 --- linux-2.6.37.orig/drivers/cbus/retu.c       2011-01-28 22:33:39.695216760 +0100
 611 +++ linux-2.6.37/drivers/cbus/retu.c    2011-01-28 22:33:39.754206648 +0100
 612 @@ -85,10 +85,10 @@
 613   *
 614   * This function writes a value to the specified register
 615   */
 616 -void retu_write_reg(int reg, u16 val)
 617 +int retu_write_reg(int reg, u16 val)
 618  {
 619         BUG_ON(!retu_initialized);
 620 -       cbus_write_reg(cbus_host, RETU_ID, reg, val);
 621 +       return cbus_write_reg(cbus_host, RETU_ID, reg, val);
 622  }
 623
 624  void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
 625 Index: linux-2.6.37/drivers/cbus/retu.h
 626 ===================================================================
 627 --- linux-2.6.37.orig/drivers/cbus/retu.h       2011-01-28 22:33:39.695216760 +0100
 628 +++ linux-2.6.37/drivers/cbus/retu.h    2011-01-28 22:40:55.380584650 +0100
 629 @@ -39,6 +39,7 @@
 630  #define RETU_REG_CC2           0x0e    /* Common control register 2 */
 631  #define RETU_REG_CTRL_CLR      0x0f    /* Regulator clear register */
 632  #define RETU_REG_CTRL_SET      0x10    /* Regulator set register */
 633 +#define RETU_REG_UNK1          0x14    /* 0x1000 is set when charger is plugged in */
 634  #define RETU_REG_STATUS                0x16    /* Status register */
 635  #define RETU_REG_WATCHDOG      0x17    /* Watchdog register */
 636  #define RETU_REG_AUDTXR                0x18    /* Audio Codec Tx register */
 637 @@ -57,8 +58,25 @@
 638
 639  #define        MAX_RETU_IRQ_HANDLERS   16
 640
 641 +/* ADC channels */
 642 +#define RETU_ADC_GND           0x00 /* Ground */
 643 +#define RETU_ADC_BSI           0x01 /* Battery Size Indicator */
 644 +#define RETU_ADC_BATTEMP       0x02 /* Battery temperature */
 645 +#define RETU_ADC_CHGVOLT       0x03 /* Charger voltage */
 646 +#define RETU_ADC_HEADSET       0x04 /* Headset detection */
 647 +#define RETU_ADC_HOOKDET       0x05 /* Hook detection */
 648 +#define RETU_ADC_RFGP          0x06 /* RF GP */
 649 +#define RETU_ADC_WBTX          0x07 /* Wideband Tx detection */
 650 +#define RETU_ADC_BATTVOLT      0x08 /* Battery voltage measurement */
 651 +#define RETU_ADC_GND2          0x09 /* Ground */
 652 +#define RETU_ADC_LIGHTSENS     0x0A /* Light sensor */
 653 +#define RETU_ADC_LIGHTTEMP     0x0B /* Light sensor temperature */
 654 +#define RETU_ADC_BKUPVOLT      0x0C /* Backup battery voltage */
 655 +#define RETU_ADC_TEMP          0x0D /* RETU temperature */
 656 +
 657 +
 658  int retu_read_reg(int reg);
 659 -void retu_write_reg(int reg, u16 val);
 660 +int retu_write_reg(int reg, u16 val);
 661  void retu_set_clear_reg_bits(int reg, u16 set, u16 clear);
 662  int retu_read_adc(int channel);
 663  int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
 664 Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
 665 ===================================================================
 666 --- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c  2011-01-28 22:33:39.679219500 +0100
 667 +++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c       2011-01-28 22:33:39.754206648 +0100
 668 @@ -907,6 +907,17 @@
 669                                     ARRAY_SIZE(n8x0_gpio_switches));
 670  }
 671
 672 +static struct platform_device n810_bm_device = {
 673 +       .name           = "n810bm",
 674 +       .id             = -1,
 675 +};
 676 +
 677 +static void __init n810_bm_init(void)
 678 +{
 679 +       if (platform_device_register(&n810_bm_device))
 680 +               BUG();
 681 +}
 682 +
 683  static void __init n8x0_init_machine(void)
 684  {
 685         omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 686 @@ -933,6 +944,8 @@
 687         n8x0_onenand_init();
 688         n8x0_mmc_init();
 689         n8x0_usb_init();
 690 +
 691 +       n810_bm_init();
 692  }
 693
 694  MACHINE_START(NOKIA_N800, "Nokia N800")
 695 Index: linux-2.6.37/drivers/cbus/lipocharge.c
 696 ===================================================================
 697 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
 698 +++ linux-2.6.37/drivers/cbus/lipocharge.c      2011-01-28 22:33:39.755206476 +0100
 699 @@ -0,0 +1,63 @@
 700 +/*
 701 + *   Generic LIPO battery charger
 702 + *
 703 + *   Copyright (c) 2010 Michael Buesch <mb@bu3sch.de>
 704 + *
 705 + *   This program is free software; you can redistribute it and/or
 706 + *   modify it under the terms of the GNU General Public License
 707 + *   as published by the Free Software Foundation; either version 2
 708 + *   of the License, or (at your option) any later version.
 709 + *
 710 + *   This program is distributed in the hope that it will be useful,
 711 + *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 712 + *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 713 + *   GNU General Public License for more details.
 714 + */
 715 +
 716 +#include "lipocharge.h"
 717 +
 718 +#include <linux/slab.h>
 719 +
 720 +
 721 +static void lipocharge_timer(unsigned long data)
 722 +{
 723 +       struct lipocharge *c = (struct lipocharge *)data;
 724 +
 725 +       spin_lock(&c->lock);
 726 +       //TODO
 727 +       spin_unlock(&c->lock);
 728 +}
 729 +
 730 +struct lipocharge * lipocharge_alloc(gfp_t gfp)
 731 +{
 732 +       struct lipocharge *c;
 733 +
 734 +       c = kzalloc(sizeof(*c), gfp);
 735 +       if (!c)
 736 +               return NULL;
 737 +       spin_lock_init(&c->lock);
 738 +       setup_timer(&c->timer, lipocharge_timer, (unsigned long)c);
 739 +
 740 +       return c;
 741 +}
 742 +
 743 +void lipocharge_free(struct lipocharge *c)
 744 +{
 745 +       kfree(c);
 746 +}
 747 +
 748 +int lipocharge_start(struct lipocharge *c)
 749 +{
 750 +       if (!c->set_current || !c->get_voltage ||
 751 +           !c->finished || !c->emergency)
 752 +               return -EINVAL;
 753 +       if (!c->top_voltage || c->top_voltage > 4200)
 754 +               return -EINVAL;
 755 +       //TODO
 756 +}
 757 +
 758 +void lipocharge_stop(struct lipocharge *c)
 759 +{
 760 +       del_timer_sync(&c->timer);
 761 +       //TODO
 762 +}
 763 Index: linux-2.6.37/drivers/cbus/lipocharge.h
 764 ===================================================================
 765 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
 766 +++ linux-2.6.37/drivers/cbus/lipocharge.h      2011-01-28 22:33:39.755206476 +0100
 767 @@ -0,0 +1,50 @@
 768 +#ifndef LIPOCHARGE_H_
 769 +#define LIPOCHARGE_H_
 770 +
 771 +#include <linux/timer.h>
 772 +#include <linux/spinlock.h>
 773 +
 774 +
 775 +#define LIPORATE(a,b)  (((a) * 1000) + (b))
 776 +#define LIPORATE_1C    LIPORATE(1,0)   /* 1C */
 777 +#define LIPORATE_p8C   LIPORATE(0,8)   /* 0.8C */
 778 +
 779 +/** struct lipocharge - A generic LIPO charger
 780 + *
 781 + * @capacity: Battery capacity in mAh.
 782 + * @rate: Charge rate.
 783 + * @top_voltage: Fully charged voltage, in mV.
 784 + *
 785 + * @set_current: Set the charge current, in mA.
 786 + * @get_voltage: Get the battery voltage, in mV.
 787 + *
 788 + * @emergency: Something went wrong. Force shutdown.
 789 + *
 790 + * @priv: opaque pointer.
 791 + */
 792 +struct lipocharge
 793 +{
 794 +       unsigned int capacity;
 795 +       unsigned int rate;
 796 +       unsigned int top_voltage;
 797 +
 798 +       int (*set_current)(struct lipocharge *c, unsigned int ma);
 799 +       int (*get_voltage)(struct lipocharge *c, unsigned int *mv);
 800 +
 801 +       void (*finished)(struct lipocharge *c);
 802 +       void (*emergency)(struct lipocharge *c);
 803 +
 804 +       void *priv;
 805 +
 806 +       /* internal */
 807 +       spinlock_t lock;
 808 +       struct timer_list timer;
 809 +};
 810 +
 811 +struct lipocharge * lipocharge_alloc(gfp_t gfp);
 812 +void lipocharge_free(struct lipocharge *c);
 813 +
 814 +int lipocharge_start(struct lipocharge *c);
 815 +void lipocharge_stop(struct lipocharge *c);
 816 +
 817 +#endif /* LIPOCHARGE_H_ */
 818 Index: linux-2.6.37/drivers/cbus/tahvo.h
 819 ===================================================================
 820 --- linux-2.6.37.orig/drivers/cbus/tahvo.h      2011-01-28 22:33:39.696216589 +0100
 821 +++ linux-2.6.37/drivers/cbus/tahvo.h   2011-01-28 22:33:39.755206476 +0100
 822 @@ -30,8 +30,14 @@
 823  #define TAHVO_REG_IDR          0x01    /* Interrupt ID */
 824  #define TAHVO_REG_IDSR         0x02    /* Interrupt status */
 825  #define TAHVO_REG_IMR          0x03    /* Interrupt mask */
 826 +#define TAHVO_REG_CHGCURR      0x04    /* Charge current control (8-bit) */
 827  #define TAHVO_REG_LEDPWMR      0x05    /* LED PWM */
 828  #define TAHVO_REG_USBR         0x06    /* USB control */
 829 +#define TAHVO_REG_CHGCTL       0x08    /* Charge control register */
 830 +#define  TAHVO_REG_CHGCTL_EN   0x0001  /* Global charge enable */
 831 +#define TAHVO_REG_CHGCTL2      0x0c    /* Charge control register 2 */
 832 +#define TAHVO_REG_BATCURR      0x0d    /* Battery (dis)charge current (signed 16-bit) */
 833 +
 834  #define TAHVO_REG_MAX          0x0d
 835
 836  /* Interrupt sources */