target/linux/lantiq/patches-2.6.32/200-mach-arv45xx.patch

   1 --- a/arch/mips/lantiq/xway/Kconfig
   2 +++ b/arch/mips/lantiq/xway/Kconfig
   3 @@ -6,6 +6,10 @@
   4         bool "Easy50712 - Danube"
   5         default y
   6
   7 +config LANTIQ_MACH_ARV45XX
   8 +       bool "ARV45XX"
   9 +       default y
  10 +
  11  endmenu
  12
  13  endif
  14 --- a/arch/mips/lantiq/xway/Makefile
  15 +++ b/arch/mips/lantiq/xway/Makefile
  16 @@ -5,3 +5,4 @@
  17
  18  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  19  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  20 +obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
  21 --- /dev/null
  22 +++ b/arch/mips/lantiq/xway/mach-arv45xx.c
  23 @@ -0,0 +1,504 @@
  24 +/*
  25 + *  This program is free software; you can redistribute it and/or modify it
  26 + *  under the terms of the GNU General Public License version 2 as published
  27 + *  by the Free Software Foundation.
  28 + *
  29 + *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  30 + */
  31 +
  32 +#include <linux/init.h>
  33 +#include <linux/platform_device.h>
  34 +#include <linux/leds.h>
  35 +#include <linux/gpio.h>
  36 +#include <linux/gpio_buttons.h>
  37 +#include <linux/mtd/mtd.h>
  38 +#include <linux/mtd/partitions.h>
  39 +#include <linux/mtd/physmap.h>
  40 +#include <linux/input.h>
  41 +#include <linux/etherdevice.h>
  42 +#include <linux/ath5k_platform.h>
  43 +#include <linux/pci.h>
  44 +
  45 +#include <lantiq_soc.h>
  46 +#include <lantiq_platform.h>
  47 +
  48 +#include "../machtypes.h"
  49 +#include "devices.h"
  50 +#include "dev-leds-gpio.h"
  51 +#include "dev-dwc_otg.h"
  52 +
  53 +#ifdef CONFIG_MTD_PARTITIONS
  54 +static struct mtd_partition arv4510_partitions[] =
  55 +{
  56 +       {
  57 +               .name   = "uboot",
  58 +               .offset = 0x0,
  59 +               .size   = 0x20000,
  60 +       },
  61 +       {
  62 +               .name   = "uboot_env",
  63 +               .offset = 0x20000,
  64 +               .size   = 0x120000,
  65 +       },
  66 +       {
  67 +               .name   = "linux",
  68 +               .offset = 0x40000,
  69 +               .size   = 0xfa0000,
  70 +       },
  71 +       {
  72 +               .name   = "board_config",
  73 +               .offset = 0xfe0000,
  74 +               .size   = 0x20000,
  75 +       },
  76 +};
  77 +
  78 +static struct mtd_partition arv45xx_partitions[] =
  79 +{
  80 +       {
  81 +               .name   = "uboot",
  82 +               .offset = 0x0,
  83 +               .size   = 0x20000,
  84 +       },
  85 +       {
  86 +               .name   = "uboot_env",
  87 +               .offset = 0x20000,
  88 +               .size   = 0x10000,
  89 +       },
  90 +       {
  91 +               .name   = "linux",
  92 +               .offset = 0x30000,
  93 +               .size   = 0x3c0000,
  94 +       },
  95 +       {
  96 +               .name   = "board_config",
  97 +               .offset = 0x3f0000,
  98 +               .size   = 0x10000,
  99 +       },
 100 +};
 101 +
 102 +static struct mtd_partition arv75xx_partitions[] =
 103 +{
 104 +       {
 105 +               .name   = "uboot",
 106 +               .offset = 0x0,
 107 +               .size   = 0x10000,
 108 +       },
 109 +       {
 110 +               .name   = "uboot_env",
 111 +               .offset = 0x10000,
 112 +               .size   = 0x10000,
 113 +       },
 114 +       {
 115 +               .name   = "linux",
 116 +               .offset = 0x20000,
 117 +               .size   = 0x7d0000,
 118 +       },
 119 +       {
 120 +               .name   = "board_config",
 121 +               .offset = 0x7f0000,
 122 +               .size   = 0x10000,
 123 +       },
 124 +};
 125 +
 126 +#endif
 127 +
 128 +static struct physmap_flash_data arv4510_flash_data = {
 129 +#ifdef CONFIG_MTD_PARTITIONS
 130 +       .nr_parts       = ARRAY_SIZE(arv4510_partitions),
 131 +       .parts          = arv4510_partitions,
 132 +#endif
 133 +};
 134 +
 135 +static struct physmap_flash_data arv45xx_flash_data = {
 136 +#ifdef CONFIG_MTD_PARTITIONS
 137 +       .nr_parts       = ARRAY_SIZE(arv45xx_partitions),
 138 +       .parts          = arv45xx_partitions,
 139 +#endif
 140 +};
 141 +
 142 +static struct physmap_flash_data arv75xx_flash_data = {
 143 +#ifdef CONFIG_MTD_PARTITIONS
 144 +       .nr_parts       = ARRAY_SIZE(arv75xx_partitions),
 145 +       .parts          = arv75xx_partitions,
 146 +#endif
 147 +};
 148 +
 149 +static struct ltq_pci_data ltq_pci_data = {
 150 +       .clock  = PCI_CLOCK_EXT,
 151 +       .gpio   = PCI_GNT1 | PCI_REQ1,
 152 +       .irq    = {
 153 +               [14] = INT_NUM_IM0_IRL0 + 22,
 154 +       },
 155 +};
 156 +
 157 +static struct ltq_eth_data ltq_eth_data = {
 158 +       .mii_mode       = PHY_INTERFACE_MODE_RMII,
 159 +};
 160 +
 161 +static struct gpio_led
 162 +arv4510pw_leds_gpio[] __initdata = {
 163 +       { .name = "soc:green:foo", .gpio = 4, .active_low = 1, },
 164 +};
 165 +
 166 +static struct gpio_led
 167 +arv4518pw_leds_gpio[] __initdata = {
 168 +       { .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
 169 +       { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
 170 +       { .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
 171 +       { .name = "soc:green:wlan", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
 172 +       { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
 173 +       { .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
 174 +       { .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" },
 175 +       { .name = "soc:green:voip", .gpio = 72, .active_low = 1, .default_trigger = "default-on" },
 176 +       { .name = "soc:green:fxs1", .gpio = 73, .active_low = 1, .default_trigger = "default-on" },
 177 +       { .name = "soc:green:fxs2", .gpio = 74, .active_low = 1, .default_trigger = "default-on" },
 178 +       { .name = "soc:green:fxo", .gpio = 75, .active_low = 1, .default_trigger = "default-on" },
 179 +};
 180 +
 181 +static struct gpio_button
 182 +arv4518pw_gpio_buttons[] __initdata = {
 183 +       { .desc = "wlan", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 28, .active_low = 1, },
 184 +       { .desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 29, .active_low = 1, },
 185 +       { .desc = "reset", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 30, .active_low = 1, },
 186 +};
 187 +
 188 +static struct gpio_led
 189 +arv4520pw_leds_gpio[] __initdata = {
 190 +       { .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
 191 +       { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
 192 +       { .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
 193 +       { .name = "soc:red:power", .gpio = 6, .active_low = 1, },
 194 +       { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, },
 195 +       { .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
 196 +       { .name = "soc:blue:voip", .gpio = 72, .active_low = 1, },
 197 +       { .name = "soc:blue:fxs1", .gpio = 73, .active_low = 1, },
 198 +       { .name = "soc:blue:fxs2", .gpio = 74, .active_low = 1, },
 199 +       { .name = "soc:blue:fxo", .gpio = 75, .active_low = 1, },
 200 +       { .name = "soc:blue:voice", .gpio = 76, .active_low = 1, },
 201 +       { .name = "soc:blue:usb", .gpio = 77, .active_low = 1, },
 202 +       { .name = "soc:blue:wlan", .gpio = 78, .active_low = 1, },
 203 +};
 204 +
 205 +static struct gpio_led
 206 +arv452cpw_leds_gpio[] __initdata = {
 207 +       { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
 208 +       { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
 209 +       { .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
 210 +       { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
 211 +       { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
 212 +       { .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
 213 +       { .name = "soc:blue:fxs1", .gpio = 72, .active_low = 1, .default_trigger = "default-on" },
 214 +       { .name = "soc:blue:fxs2", .gpio = 73, .active_low = 1, .default_trigger = "default-on" },
 215 +       { .name = "soc:blue:wps", .gpio = 74, .active_low = 1, .default_trigger = "default-on" },
 216 +       { .name = "soc:blue:fxo", .gpio = 75, .active_low = 1, .default_trigger = "default-on" },
 217 +       { .name = "soc:blue:voice", .gpio = 76, .active_low = 1, .default_trigger = "default-on" },
 218 +       { .name = "soc:blue:usb", .gpio = 77, .active_low = 1, .default_trigger = "default-on" },
 219 +       { .name = "soc:blue:wlan", .gpio = 78, .active_low = 1, .default_trigger = "default-on" },
 220 +       { .name = "soc:blue:internet", .gpio = 80, .active_low = 1, .default_trigger = "default-on" },
 221 +       { .name = "soc:red:internet", .gpio = 81, .active_low = 1, .default_trigger = "default-on" },
 222 +};
 223 +
 224 +static struct gpio_led
 225 +arv4525pw_leds_gpio[] __initdata = {
 226 +       { .name = "soc:green:festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
 227 +       { .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
 228 +       { .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
 229 +       { .name = "soc:green:wlan", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
 230 +       { .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
 231 +};
 232 +
 233 +static struct gpio_led
 234 +arv752dpw22_leds_gpio[] __initdata = {
 235 +       { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
 236 +       { .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
 237 +       { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
 238 +       { .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
 239 +       { .name = "soc:red:fxo", .gpio = 75, .active_low = 1, .default_trigger = "default-on" },
 240 +       { .name = "soc:red:voice", .gpio = 76, .active_low = 1, .default_trigger = "default-on" },
 241 +       { .name = "soc:green:usb", .gpio = 77, .active_low = 1, .default_trigger = "default-on" },
 242 +       { .name = "soc:green:wlan", .gpio = 78, .active_low = 1, .default_trigger = "default-on" },
 243 +       { .name = "soc:green:wlan1", .gpio = 79, .active_low = 1, .default_trigger = "default-on" },
 244 +       { .name = "soc:blue:wlan", .gpio = 80, .active_low = 1, .default_trigger = "default-on" },
 245 +       { .name = "soc:blue:wlan1", .gpio = 81, .active_low = 1, .default_trigger = "default-on" },
 246 +       { .name = "soc:green:eth1", .gpio = 83, .active_low = 1, .default_trigger = "default-on" },
 247 +       { .name = "soc:green:eth2", .gpio = 84, .active_low = 1, .default_trigger = "default-on" },
 248 +       { .name = "soc:green:eth3", .gpio = 85, .active_low = 1, .default_trigger = "default-on" },
 249 +       { .name = "soc:green:eth4", .gpio = 86, .active_low = 1, .default_trigger = "default-on", },
 250 +};
 251 +
 252 +static struct gpio_button
 253 +arv752dpw22_gpio_buttons[] __initdata = {
 254 +       { .desc = "btn0", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 12, .active_low = 1, },
 255 +       { .desc = "btn1", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 13, .active_low = 1, },
 256 +       { .desc = "btn2", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 28, .active_low = 1, },
 257 +};
 258 +
 259 +static struct gpio_led
 260 +arv7518pw_leds_gpio[] __initdata = {
 261 +       { .name = "soc:green:power", .gpio = 2, .active_low = 1, },
 262 +       { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
 263 +       { .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
 264 +       { .name = "soc:green:wlan", .gpio = 6, .active_low = 1, },
 265 +       { .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
 266 +       { .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
 267 +};
 268 +
 269 +static struct gpio_button
 270 +arv7518pw_gpio_buttons[] __initdata = {
 271 +       { .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 23, .active_low = 1, },
 272 +       { .desc = "wlan", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 25, .active_low = 1, },
 273 +};
 274 +
 275 +static void
 276 +arv45xx_register_ethernet(void)
 277 +{
 278 +#define ARV45XX_BRN_MAC                        0x3f0016
 279 +       memcpy_fromio(&ltq_eth_data.mac.sa_data,
 280 +               (void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_MAC), 6);
 281 +       ltq_register_etop(&ltq_eth_data);
 282 +}
 283 +
 284 +static void
 285 +arv75xx_register_ethernet(void)
 286 +{
 287 +#define ARV75XX_BRN_MAC                        0x7f0016
 288 +       memcpy_fromio(&ltq_eth_data.mac.sa_data,
 289 +               (void *)KSEG1ADDR(LTQ_FLASH_START + ARV75XX_BRN_MAC), 6);
 290 +       ltq_register_etop(&ltq_eth_data);
 291 +}
 292 +
 293 +static void
 294 +bewan_register_ethernet(void)
 295 +{
 296 +#define BEWAN_BRN_MAC                  0x3f0014
 297 +       memcpy_fromio(&ltq_eth_data.mac.sa_data,
 298 +               (void *)KSEG1ADDR(LTQ_FLASH_START + BEWAN_BRN_MAC), 6);
 299 +       ltq_register_etop(&ltq_eth_data);
 300 +}
 301 +
 302 +static u16 arv45xx_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
 303 +static struct ath5k_platform_data arv45xx_ath5k_platform_data;
 304 +
 305 +static int arv45xx_pci_plat_dev_init(struct pci_dev *dev)
 306 +{
 307 +       dev->dev.platform_data = &arv45xx_ath5k_platform_data;
 308 +       return 0;
 309 +}
 310 +
 311 +void __init
 312 +arv45xx_register_ath5k(void)
 313 +{
 314 +#define ARV45XX_BRN_ATH                0x3f0478
 315 +       int i;
 316 +       unsigned char eeprom_mac[6];
 317 +       static u16 eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
 318 +       u32 *p = (u32*)arv45xx_ath5k_eeprom_data;
 319 +
 320 +       memcpy_fromio(eeprom_mac,
 321 +               (void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_MAC), 6);
 322 +       eeprom_mac[5]++;
 323 +       memcpy_fromio(arv45xx_ath5k_eeprom_data,
 324 +               (void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_ATH), ATH5K_PLAT_EEP_MAX_WORDS);
 325 +       // swap eeprom bytes
 326 +       for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++){
 327 +               //arv4518_ath5k_eeprom_data[i] = ((eeprom_data[i]&0xff)<<8)|((eeprom_data[i]&0xff00)>>8);
 328 +               p[i] = ((eeprom_data[(i<<1)+1]&0xff)<<24)|((eeprom_data[(i<<1)+1]&0xff00)<<8)|((eeprom_data[i<<1]&0xff)<<8)|((eeprom_data[i<<1]&0xff00)>>8);
 329 +               if (i == 0xbf>>1){
 330 +                       // printk ("regdomain: 0x%x --> 0x%x\n", p[i], (p[i] & 0xffff0000)|0x67);
 331 +                       /* regdomain is invalid?? how did original fw convert
 332 +                       * value to 0x82d4 ??
 333 +                       * for now, force to 0x67 */
 334 +                       p[i] &= 0xffff0000;
 335 +                       p[i] |= 0x67;
 336 +               }
 337 +       }
 338 +       arv45xx_ath5k_platform_data.eeprom_data = arv45xx_ath5k_eeprom_data;
 339 +       arv45xx_ath5k_platform_data.macaddr = eeprom_mac;
 340 +       //lqpci_plat_dev_init = arv45xx_pci_plat_dev_init;
 341 +}
 342 +
 343 +static void __init
 344 +arv3527p_init(void)
 345 +{
 346 +       ltq_register_gpio_stp();
 347 +       //ltq_add_device_leds_gpio(arv3527p_leds_gpio, ARRAY_SIZE(arv3527p_leds_gpio));
 348 +       ltq_register_nor(&arv45xx_flash_data);
 349 +       arv45xx_register_ethernet();
 350 +}
 351 +
 352 +MIPS_MACHINE(LANTIQ_MACH_ARV3527P,
 353 +                       "ARV3527P",
 354 +                       "ARV3527P - Arcor Easybox 401",
 355 +                       arv3527p_init);
 356 +
 357 +static void __init
 358 +arv4510pw_init(void)
 359 +{
 360 +       ltq_register_gpio_stp();
 361 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4510pw_leds_gpio), arv4510pw_leds_gpio);
 362 +       ltq_register_nor(&arv4510_flash_data);
 363 +       ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31);
 364 +       ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26);
 365 +       ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2;
 366 +       ltq_register_pci(&ltq_pci_data);
 367 +       bewan_register_ethernet();
 368 +}
 369 +
 370 +MIPS_MACHINE(LANTIQ_MACH_ARV4510PW,
 371 +                       "ARV4510PW",
 372 +                       "ARV4510PW - Wippies Homebox",
 373 +                       arv4510pw_init);
 374 +
 375 +static void __init
 376 +arv4518pw_init(void)
 377 +{
 378 +#define ARV4518PW_EBU                  0
 379 +#define ARV4518PW_USB                  14
 380 +#define ARV4518PW_SWITCH_RESET         13
 381 +
 382 +       ltq_register_gpio_ebu(ARV4518PW_EBU);
 383 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4518pw_leds_gpio), arv4518pw_leds_gpio);
 384 +       ltq_register_gpio_buttons(arv4518pw_gpio_buttons, ARRAY_SIZE(arv4518pw_gpio_buttons));
 385 +       ltq_register_nor(&arv45xx_flash_data);
 386 +       ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2;
 387 +       ltq_register_pci(&ltq_pci_data);
 388 +       ltq_register_madwifi_eep();
 389 +       xway_register_dwc(ARV4518PW_USB);
 390 +       arv45xx_register_ethernet();
 391 +       arv45xx_register_ath5k();
 392 +
 393 +       gpio_request(ARV4518PW_SWITCH_RESET, "switch");
 394 +       gpio_direction_output(ARV4518PW_SWITCH_RESET, 1);
 395 +       gpio_export(ARV4518PW_SWITCH_RESET, 0);
 396 +}
 397 +
 398 +MIPS_MACHINE(LANTIQ_MACH_ARV4518PW,
 399 +                       "ARV4518PW",
 400 +                       "ARV4518PW - SMC7908A-ISP, Airties WAV-221",
 401 +                       arv4518pw_init);
 402 +
 403 +static void __init
 404 +arv4520pw_init(void)
 405 +{
 406 +#define ARV4520PW_EBU                  0x400
 407 +#define ARV4520PW_USB                  28
 408 +#define ARV4520PW_SWITCH_RESET         82
 409 +
 410 +       ltq_register_gpio_ebu(ARV4520PW_EBU);
 411 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4520pw_leds_gpio), arv4520pw_leds_gpio);
 412 +       ltq_register_nor(&arv45xx_flash_data);
 413 +       ltq_register_pci(&ltq_pci_data);
 414 +       ltq_register_tapi();
 415 +       arv45xx_register_ethernet();
 416 +       xway_register_dwc(ARV4520PW_USB);
 417 +
 418 +       gpio_request(ARV4520PW_SWITCH_RESET, "switch");
 419 +       gpio_set_value(ARV4520PW_SWITCH_RESET, 1);
 420 +}
 421 +
 422 +MIPS_MACHINE(LANTIQ_MACH_ARV4520PW,
 423 +                       "ARV4520PW",
 424 +                       "ARV4520PW - Airties WAV-281, Arcor A800",
 425 +                       arv4520pw_init);
 426 +
 427 +static void __init
 428 +arv452Cpw_init(void)
 429 +{
 430 +#define ARV452CPW_EBU                  0x77f
 431 +#define ARV452CPW_USB                  28
 432 +#define ARV452CPW_RELAY1               31
 433 +#define ARV452CPW_RELAY2               79
 434 +#define ARV452CPW_SWITCH_RESET         82
 435 +
 436 +       ltq_register_gpio_ebu(ARV452CPW_EBU);
 437 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv452cpw_leds_gpio), arv452cpw_leds_gpio);
 438 +       ltq_register_nor(&arv45xx_flash_data);
 439 +       ltq_register_pci(&ltq_pci_data);
 440 +       ltq_register_madwifi_eep();
 441 +       xway_register_dwc(ARV452CPW_USB);
 442 +       arv45xx_register_ethernet();
 443 +       arv45xx_register_ath5k();
 444 +
 445 +       gpio_request(ARV452CPW_SWITCH_RESET, "switch");
 446 +       gpio_set_value(ARV452CPW_SWITCH_RESET, 1);
 447 +       gpio_export(ARV452CPW_SWITCH_RESET, 0);
 448 +
 449 +       gpio_request(ARV452CPW_RELAY1, "relay1");
 450 +       gpio_direction_output(ARV452CPW_RELAY1, 1);
 451 +       gpio_export(ARV452CPW_RELAY1, 0);
 452 +
 453 +       gpio_request(ARV452CPW_RELAY2, "relay2");
 454 +       gpio_set_value(ARV452CPW_RELAY2, 1);
 455 +       gpio_export(ARV452CPW_RELAY2, 0);
 456 +}
 457 +
 458 +MIPS_MACHINE(LANTIQ_MACH_ARV452CPW,
 459 +                       "ARV452CPW",
 460 +                       "ARV452CPW - Arcor A801",
 461 +                       arv452Cpw_init);
 462 +
 463 +static void __init
 464 +arv4525pw_init(void)
 465 +{
 466 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4525pw_leds_gpio), arv4525pw_leds_gpio);
 467 +       ltq_register_nor(&arv45xx_flash_data);
 468 +       ltq_pci_data.clock = PCI_CLOCK_INT;
 469 +       ltq_register_pci(&ltq_pci_data);
 470 +       ltq_register_madwifi_eep();
 471 +       ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
 472 +       arv45xx_register_ethernet();
 473 +}
 474 +
 475 +MIPS_MACHINE(LANTIQ_MACH_ARV4525PW,
 476 +                       "ARV4525PW",
 477 +                       "ARV4525PW - Speedport W502V",
 478 +                       arv4525pw_init);
 479 +
 480 +static void __init
 481 +arv7518pw_init(void)
 482 +{
 483 +#define ARV7518PW_EBU                  0x2
 484 +#define ARV7518PW_USB                  14
 485 +
 486 +       ltq_register_gpio_ebu(ARV7518PW_EBU);
 487 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv7518pw_leds_gpio), arv7518pw_leds_gpio);
 488 +       ltq_register_gpio_buttons(arv7518pw_gpio_buttons, ARRAY_SIZE(arv7518pw_gpio_buttons));
 489 +       ltq_register_nor(&arv75xx_flash_data);
 490 +       ltq_register_pci(&ltq_pci_data);
 491 +       ltq_register_tapi();
 492 +       xway_register_dwc(ARV7518PW_USB);
 493 +       arv75xx_register_ethernet();
 494 +       //arv7518_register_ath9k(mac);
 495 +}
 496 +
 497 +MIPS_MACHINE(LANTIQ_MACH_ARV7518PW,
 498 +                       "ARV7518PW",
 499 +                       "ARV7518PW - ASTORIA",
 500 +                       arv7518pw_init);
 501 +
 502 +static void __init
 503 +arv752dpw22_init(void)
 504 +{
 505 +#define ARV752DPW22_EBU                        0x2
 506 +#define ARV752DPW22_USB                        72
 507 +#define ARV752DPW22_RELAY              73
 508 +
 509 +       ltq_register_gpio_ebu(ARV752DPW22_EBU);
 510 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv752dpw22_leds_gpio), arv752dpw22_leds_gpio);
 511 +       ltq_register_gpio_buttons(arv752dpw22_gpio_buttons, ARRAY_SIZE(arv752dpw22_gpio_buttons));
 512 +       ltq_register_nor(&arv75xx_flash_data);
 513 +       ltq_pci_data.irq[15] = (INT_NUM_IM2_IRL0 + 31);
 514 +       ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
 515 +       ltq_register_pci(&ltq_pci_data);
 516 +       xway_register_dwc(ARV752DPW22_USB);
 517 +       arv75xx_register_ethernet();
 518 +
 519 +       gpio_request(ARV752DPW22_RELAY, "relay");
 520 +       gpio_set_value(ARV752DPW22_RELAY, 1);
 521 +       gpio_export(ARV752DPW22_RELAY, 0);
 522 +}
 523 +
 524 +MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22,
 525 +                       "ARV752DPW22",
 526 +                       "ARV752DPW22 - Arcor A803",
 527 +                       arv752dpw22_init);
 528 --- a/arch/mips/lantiq/machtypes.h
 529 +++ b/arch/mips/lantiq/machtypes.h
 530 @@ -21,6 +21,17 @@
 531         LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
 532         LANTIQ_MACH_EASY98020,          /* Falcon Reference Board */
 533         LANTIQ_MACH_95C3AM1,            /* Board 95C3AM1 */
 534 +
 535 +       /* Arcadyan */
 536 +       LANTIQ_MACH_ARV3527P,           /* Arcor easybox a401 */
 537 +       LANTIQ_MACH_ARV4510PW,          /* Wippies Homebox */
 538 +       LANTIQ_MACH_ARV4518PW,          /* Airties WAV-221, SMC-7908A-ISP */
 539 +       LANTIQ_MACH_ARV4520PW,          /* Airties WAV-281, Arcor EasyboxA800 */
 540 +       LANTIQ_MACH_ARV452CPW,          /* Arcor EasyboxA801 */
 541 +       LANTIQ_MACH_ARV4525PW,          /* Speedport W502V */
 542 +       LANTIQ_MACH_ARV752DPW,          /* Arcor easybox a802 */
 543 +       LANTIQ_MACH_ARV752DPW22,        /* Arcor easybox a803 */
 544 +       LANTIQ_MACH_ARV7518PW,          /* ASTORIA */
 545  };
 546
 547  #endif