kernel: rtl8306: cosmetic changes for swconfig
[openwrt.git] / target / linux / generic / files / drivers / net / phy / rtl8306.c
1 /*
2  * rtl8306.c: RTL8306S switch driver
3  *
4  * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15
16 #include <linux/if.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/list.h>
20 #include <linux/if_ether.h>
21 #include <linux/skbuff.h>
22 #include <linux/netdevice.h>
23 #include <linux/netlink.h>
24 #include <net/genetlink.h>
25 #include <linux/switch.h>
26 #include <linux/delay.h>
27 #include <linux/phy.h>
28
29 //#define DEBUG 1
30
31 /* Global (PHY0) */
32 #define RTL8306_REG_PAGE                16
33 #define RTL8306_REG_PAGE_LO             (1 << 15)
34 #define RTL8306_REG_PAGE_HI             (1 << 1) /* inverted */
35
36 #define RTL8306_NUM_VLANS               16
37 #define RTL8306_NUM_PORTS               6
38 #define RTL8306_PORT_CPU                5
39 #define RTL8306_NUM_PAGES               4
40 #define RTL8306_NUM_REGS                32
41
42 #define RTL_NAME_S          "RTL8306S"
43 #define RTL_NAME_SD         "RTL8306SD"
44 #define RTL_NAME_SDM        "RTL8306SDM"
45 #define RTL_NAME_UNKNOWN    "RTL8306(unknown)"
46
47 #define RTL8306_MAGIC   0x8306
48
49 static LIST_HEAD(phydevs);
50
51 struct rtl_priv {
52         struct list_head list;
53         struct switch_dev dev;
54         int page;
55         int type;
56         int do_cpu;
57         struct mii_bus *bus;
58         char hwname[sizeof(RTL_NAME_UNKNOWN)];
59         bool fixup;
60 };
61
62 struct rtl_phyregs {
63         int nway;
64         int speed;
65         int duplex;
66 };
67
68 #define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
69
70 enum {
71         RTL_TYPE_S,
72         RTL_TYPE_SD,
73         RTL_TYPE_SDM,
74 };
75
76 struct rtl_reg {
77         int page;
78         int phy;
79         int reg;
80         int bits;
81         int shift;
82         int inverted;
83 };
84
85 #define RTL_VLAN_REGOFS(name) \
86         (RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
87
88 #define RTL_PORT_REGOFS(name) \
89         (RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
90
91 #define RTL_PORT_REG(id, reg) \
92         (RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
93
94 #define RTL_VLAN_REG(id, reg) \
95         (RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
96
97 #define RTL_GLOBAL_REGATTR(reg) \
98         .id = RTL_REG_##reg, \
99         .type = SWITCH_TYPE_INT, \
100         .ofs = 0, \
101         .set = rtl_attr_set_int, \
102         .get = rtl_attr_get_int
103
104 #define RTL_PORT_REGATTR(reg) \
105         .id = RTL_REG_PORT0_##reg, \
106         .type = SWITCH_TYPE_INT, \
107         .ofs = RTL_PORT_REGOFS(reg), \
108         .set = rtl_attr_set_port_int, \
109         .get = rtl_attr_get_port_int
110
111 #define RTL_VLAN_REGATTR(reg) \
112         .id = RTL_REG_VLAN0_##reg, \
113         .type = SWITCH_TYPE_INT, \
114         .ofs = RTL_VLAN_REGOFS(reg), \
115         .set = rtl_attr_set_vlan_int, \
116         .get = rtl_attr_get_vlan_int
117
118 enum rtl_regidx {
119         RTL_REG_CHIPID,
120         RTL_REG_CHIPVER,
121         RTL_REG_CHIPTYPE,
122         RTL_REG_CPUPORT,
123
124         RTL_REG_EN_CPUPORT,
125         RTL_REG_EN_TAG_OUT,
126         RTL_REG_EN_TAG_CLR,
127         RTL_REG_EN_TAG_IN,
128         RTL_REG_TRAP_CPU,
129         RTL_REG_TRUNK_PORTSEL,
130         RTL_REG_EN_TRUNK,
131         RTL_REG_RESET,
132
133         RTL_REG_VLAN_ENABLE,
134         RTL_REG_VLAN_FILTER,
135         RTL_REG_VLAN_TAG_ONLY,
136         RTL_REG_VLAN_TAG_AWARE,
137 #define RTL_VLAN_ENUM(id) \
138         RTL_REG_VLAN##id##_VID, \
139         RTL_REG_VLAN##id##_PORTMASK
140         RTL_VLAN_ENUM(0),
141         RTL_VLAN_ENUM(1),
142         RTL_VLAN_ENUM(2),
143         RTL_VLAN_ENUM(3),
144         RTL_VLAN_ENUM(4),
145         RTL_VLAN_ENUM(5),
146         RTL_VLAN_ENUM(6),
147         RTL_VLAN_ENUM(7),
148         RTL_VLAN_ENUM(8),
149         RTL_VLAN_ENUM(9),
150         RTL_VLAN_ENUM(10),
151         RTL_VLAN_ENUM(11),
152         RTL_VLAN_ENUM(12),
153         RTL_VLAN_ENUM(13),
154         RTL_VLAN_ENUM(14),
155         RTL_VLAN_ENUM(15),
156 #define RTL_PORT_ENUM(id) \
157         RTL_REG_PORT##id##_PVID, \
158         RTL_REG_PORT##id##_NULL_VID_REPLACE, \
159         RTL_REG_PORT##id##_NON_PVID_DISCARD, \
160         RTL_REG_PORT##id##_VID_INSERT, \
161         RTL_REG_PORT##id##_TAG_INSERT, \
162         RTL_REG_PORT##id##_LINK, \
163         RTL_REG_PORT##id##_SPEED, \
164         RTL_REG_PORT##id##_NWAY, \
165         RTL_REG_PORT##id##_NRESTART, \
166         RTL_REG_PORT##id##_DUPLEX, \
167         RTL_REG_PORT##id##_RXEN, \
168         RTL_REG_PORT##id##_TXEN
169         RTL_PORT_ENUM(0),
170         RTL_PORT_ENUM(1),
171         RTL_PORT_ENUM(2),
172         RTL_PORT_ENUM(3),
173         RTL_PORT_ENUM(4),
174         RTL_PORT_ENUM(5),
175 };
176
177 static const struct rtl_reg rtl_regs[] = {
178         [RTL_REG_CHIPID]         = { 0, 4, 30, 16,  0, 0 },
179         [RTL_REG_CHIPVER]        = { 0, 4, 31,  8,  0, 0 },
180         [RTL_REG_CHIPTYPE]       = { 0, 4, 31,  2,  8, 0 },
181
182         /* CPU port number */
183         [RTL_REG_CPUPORT]        = { 2, 4, 21,  3,  0, 0 },
184         /* Enable CPU port function */
185         [RTL_REG_EN_CPUPORT]     = { 3, 2, 21,  1, 15, 1 },
186         /* Enable CPU port tag insertion */
187         [RTL_REG_EN_TAG_OUT]     = { 3, 2, 21,  1, 12, 0 },
188         /* Enable CPU port tag removal */
189         [RTL_REG_EN_TAG_CLR]     = { 3, 2, 21,  1, 11, 0 },
190         /* Enable CPU port tag checking */
191         [RTL_REG_EN_TAG_IN]      = { 0, 4, 21,  1,  7, 0 },
192         [RTL_REG_EN_TRUNK]       = { 0, 0, 19,  1, 11, 1 },
193         [RTL_REG_TRUNK_PORTSEL]  = { 0, 0, 16,  1,  6, 1 },
194         [RTL_REG_RESET]          = { 0, 0, 16,  1, 12, 0 },
195
196         [RTL_REG_TRAP_CPU]       = { 3, 2, 22,  1,  6, 0 },
197
198         [RTL_REG_VLAN_TAG_ONLY]  = { 0, 0, 16,  1,  8, 1 },
199         [RTL_REG_VLAN_FILTER]    = { 0, 0, 16,  1,  9, 1 },
200         [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16,  1, 10, 1 },
201         [RTL_REG_VLAN_ENABLE]    = { 0, 0, 18,  1,  8, 1 },
202
203 #define RTL_VLAN_REGS(id, phy, page, regofs) \
204         [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
205         [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
206         RTL_VLAN_REGS( 0, 0, 0, 0),
207         RTL_VLAN_REGS( 1, 1, 0, 0),
208         RTL_VLAN_REGS( 2, 2, 0, 0),
209         RTL_VLAN_REGS( 3, 3, 0, 0),
210         RTL_VLAN_REGS( 4, 4, 0, 0),
211         RTL_VLAN_REGS( 5, 0, 1, 2),
212         RTL_VLAN_REGS( 6, 1, 1, 2),
213         RTL_VLAN_REGS( 7, 2, 1, 2),
214         RTL_VLAN_REGS( 8, 3, 1, 2),
215         RTL_VLAN_REGS( 9, 4, 1, 2),
216         RTL_VLAN_REGS(10, 0, 1, 4),
217         RTL_VLAN_REGS(11, 1, 1, 4),
218         RTL_VLAN_REGS(12, 2, 1, 4),
219         RTL_VLAN_REGS(13, 3, 1, 4),
220         RTL_VLAN_REGS(14, 4, 1, 4),
221         RTL_VLAN_REGS(15, 0, 1, 6),
222
223 #define REG_PORT_SETTING(port, phy) \
224         [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
225         [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
226         [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
227         [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
228         [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
229         [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
230         [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
231         [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
232         [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
233         [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
234         [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
235
236         REG_PORT_SETTING(0, 0),
237         REG_PORT_SETTING(1, 1),
238         REG_PORT_SETTING(2, 2),
239         REG_PORT_SETTING(3, 3),
240         REG_PORT_SETTING(4, 4),
241         REG_PORT_SETTING(5, 6),
242
243 #define REG_PORT_PVID(phy, page, regofs) \
244         { page, phy, 24 + regofs, 4, 12, 0 }
245         [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
246         [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
247         [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
248         [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
249         [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
250         [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
251 };
252
253
254 static inline void
255 rtl_set_page(struct rtl_priv *priv, unsigned int page)
256 {
257         struct mii_bus *bus = priv->bus;
258         u16 pgsel;
259
260         if (priv->fixup)
261                 return;
262
263         if (priv->page == page)
264                 return;
265
266         BUG_ON(page > RTL8306_NUM_PAGES);
267         pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
268         pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
269         if (page & (1 << 0))
270                 pgsel |= RTL8306_REG_PAGE_LO;
271         if (!(page & (1 << 1))) /* bit is inverted */
272                 pgsel |= RTL8306_REG_PAGE_HI;
273         bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
274 }
275
276 static inline int
277 rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
278 {
279         struct rtl_priv *priv = to_rtl(dev);
280         struct mii_bus *bus = priv->bus;
281
282         rtl_set_page(priv, page);
283         bus->write(bus, phy, reg, val);
284         bus->read(bus, phy, reg); /* flush */
285         return 0;
286 }
287
288 static inline int
289 rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
290 {
291         struct rtl_priv *priv = to_rtl(dev);
292         struct mii_bus *bus = priv->bus;
293
294         rtl_set_page(priv, page);
295         return bus->read(bus, phy, reg);
296 }
297
298 static inline u16
299 rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
300 {
301         struct rtl_priv *priv = to_rtl(dev);
302         struct mii_bus *bus = priv->bus;
303         u16 r;
304
305         rtl_set_page(priv, page);
306         r = bus->read(bus, phy, reg);
307         r &= ~mask;
308         r |= val;
309         bus->write(bus, phy, reg, r);
310         return bus->read(bus, phy, reg); /* flush */
311 }
312
313
314 static inline int
315 rtl_get(struct switch_dev *dev, enum rtl_regidx s)
316 {
317         const struct rtl_reg *r = &rtl_regs[s];
318         u16 val;
319
320         BUG_ON(s >= ARRAY_SIZE(rtl_regs));
321         if (r->bits == 0) /* unimplemented */
322                 return 0;
323
324         val = rtl_r16(dev, r->page, r->phy, r->reg);
325
326         if (r->shift > 0)
327                 val >>= r->shift;
328
329         if (r->inverted)
330                 val = ~val;
331
332         val &= (1 << r->bits) - 1;
333
334         return val;
335 }
336
337 static int
338 rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
339 {
340         const struct rtl_reg *r = &rtl_regs[s];
341         u16 mask = 0xffff;
342
343         BUG_ON(s >= ARRAY_SIZE(rtl_regs));
344
345         if (r->bits == 0) /* unimplemented */
346                 return 0;
347
348         if (r->shift > 0)
349                 val <<= r->shift;
350
351         if (r->inverted)
352                 val = ~val;
353
354         if (r->bits != 16) {
355                 mask = (1 << r->bits) - 1;
356                 mask <<= r->shift;
357         }
358         val &= mask;
359         return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
360 }
361
362 static void
363 rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
364 {
365         regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
366         regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
367         regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
368 }
369
370 static void
371 rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
372 {
373         rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway);
374         rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed);
375         rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex);
376 }
377
378 static void
379 rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
380 {
381         rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
382         rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
383
384         if ((port >= 5) || !enabled)
385                 return;
386
387         /* restart autonegotiation if enabled */
388         rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1);
389 }
390
391 static int
392 rtl_hw_apply(struct switch_dev *dev)
393 {
394         int i;
395         int trunk_en, trunk_psel;
396         struct rtl_phyregs port5;
397
398         rtl_phy_save(dev, 5, &port5);
399
400         /* disable rx/tx from PHYs */
401         for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
402                 rtl_port_set_enable(dev, i, 0);
403         }
404
405         /* save trunking status */
406         trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
407         trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
408
409         /* trunk port 3 and 4
410          * XXX: Big WTF, but RealTek seems to do it */
411         rtl_set(dev, RTL_REG_EN_TRUNK, 1);
412         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
413
414         /* execute the software reset */
415         rtl_set(dev, RTL_REG_RESET, 1);
416
417         /* wait for the reset to complete,
418          * but don't wait for too long */
419         for (i = 0; i < 10; i++) {
420                 if (rtl_get(dev, RTL_REG_RESET) == 0)
421                         break;
422
423                 msleep(1);
424         }
425
426         /* enable rx/tx from PHYs */
427         for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
428                 rtl_port_set_enable(dev, i, 1);
429         }
430
431         /* restore trunking settings */
432         rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
433         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
434         rtl_phy_restore(dev, 5, &port5);
435
436         return 0;
437 }
438
439 static void
440 rtl_hw_init(struct switch_dev *dev)
441 {
442         struct rtl_priv *priv = to_rtl(dev);
443         int cpu_mask = 1 << dev->cpu_port;
444         int i;
445
446         rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
447         rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
448         rtl_set(dev, RTL_REG_EN_TRUNK, 0);
449         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
450
451         /* initialize cpu port settings */
452         if (priv->do_cpu) {
453                 rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
454                 rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
455         } else {
456                 rtl_set(dev, RTL_REG_CPUPORT, 7);
457                 rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
458         }
459         rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
460         rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
461         rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
462
463         /* reset all vlans */
464         for (i = 0; i < RTL8306_NUM_VLANS; i++) {
465                 rtl_set(dev, RTL_VLAN_REG(i, VID), i);
466                 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
467         }
468
469         /* default to port isolation */
470         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
471                 unsigned long mask;
472
473                 if ((1 << i) == cpu_mask)
474                         mask = ((1 << RTL8306_NUM_PORTS) - 1) & ~cpu_mask; /* all bits set */
475                 else
476                         mask = cpu_mask | (1 << i);
477
478                 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), mask);
479                 rtl_set(dev, RTL_PORT_REG(i, PVID), i);
480                 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
481                 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
482                 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
483         }
484         rtl_hw_apply(dev);
485 }
486
487 #ifdef DEBUG
488 static int
489 rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
490 {
491         struct rtl_priv *priv = to_rtl(dev);
492         priv->do_cpu = val->value.i;
493         rtl_hw_init(dev);
494         return 0;
495 }
496
497 static int
498 rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
499 {
500         struct rtl_priv *priv = to_rtl(dev);
501         val->value.i = priv->do_cpu;
502         return 0;
503 }
504
505 static int
506 rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
507 {
508         dev->cpu_port = val->value.i;
509         rtl_hw_init(dev);
510         return 0;
511 }
512
513 static int
514 rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
515 {
516         val->value.i = dev->cpu_port;
517         return 0;
518 }
519 #endif
520
521 static int
522 rtl_reset(struct switch_dev *dev)
523 {
524         rtl_hw_init(dev);
525         return 0;
526 }
527
528 static int
529 rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
530 {
531         int idx = attr->id + (val->port_vlan * attr->ofs);
532         struct rtl_phyregs port;
533
534         if (attr->id >= ARRAY_SIZE(rtl_regs))
535                 return -EINVAL;
536
537         if ((attr->max > 0) && (val->value.i > attr->max))
538                 return -EINVAL;
539
540         /* access to phy register 22 on port 4/5
541          * needs phy status save/restore */
542         if ((val->port_vlan > 3) &&
543                 (rtl_regs[idx].reg == 22) &&
544                 (rtl_regs[idx].page == 0)) {
545
546                 rtl_phy_save(dev, val->port_vlan, &port);
547                 rtl_set(dev, idx, val->value.i);
548                 rtl_phy_restore(dev, val->port_vlan, &port);
549         } else {
550                 rtl_set(dev, idx, val->value.i);
551         }
552
553         return 0;
554 }
555
556 static int
557 rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
558 {
559         int idx = attr->id + (val->port_vlan * attr->ofs);
560
561         if (idx >= ARRAY_SIZE(rtl_regs))
562                 return -EINVAL;
563
564         val->value.i = rtl_get(dev, idx);
565         return 0;
566 }
567
568 static int
569 rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
570 {
571         if (val->port_vlan >= RTL8306_NUM_PORTS)
572                 return -EINVAL;
573
574         return rtl_attr_set_int(dev, attr, val);
575 }
576
577 static int
578 rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
579 {
580         if (val->port_vlan >= RTL8306_NUM_PORTS)
581                 return -EINVAL;
582         return rtl_attr_get_int(dev, attr, val);
583 }
584
585 static int 
586 rtl_get_port_link(struct switch_dev *dev, int port, struct switch_port_link *link)
587 {
588         if (port >= RTL8306_NUM_PORTS)
589                 return -EINVAL;
590
591         link->link = rtl_get(dev, RTL_PORT_REG(port, LINK));
592         if (!link->link)
593                 return 0;
594
595         link->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
596         link->aneg = rtl_get(dev, RTL_PORT_REG(port, NWAY));
597
598         if (rtl_get(dev, RTL_PORT_REG(port, SPEED)))
599                 link->speed = SWITCH_PORT_SPEED_100;
600         else
601                 link->speed = SWITCH_PORT_SPEED_10;
602
603         return 0;
604 }
605
606 static int
607 rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
608 {
609         if (val->port_vlan >= dev->vlans)
610                 return -EINVAL;
611
612         return rtl_attr_set_int(dev, attr, val);
613 }
614
615 static int
616 rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
617 {
618         if (val->port_vlan >= dev->vlans)
619                 return -EINVAL;
620
621         return rtl_attr_get_int(dev, attr, val);
622 }
623
624 static int
625 rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
626 {
627         unsigned int i, mask;
628
629         mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
630         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
631                 struct switch_port *port;
632
633                 if (!(mask & (1 << i)))
634                         continue;
635
636                 port = &val->value.ports[val->len];
637                 port->id = i;
638                 if (rtl_get(dev, RTL_PORT_REG(i, TAG_INSERT)) == 2 || i == dev->cpu_port)
639                         port->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
640                 val->len++;
641         }
642
643         return 0;
644 }
645
646 static int
647 rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
648 {
649         struct rtl_priv *priv = to_rtl(dev);
650         struct rtl_phyregs port;
651         int en = val->value.i;
652         int i;
653
654         rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
655         rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
656         rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
657         rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
658         if (en)
659                 rtl_set(dev, RTL_REG_VLAN_FILTER, en);
660
661         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
662                 if (i > 3)
663                         rtl_phy_save(dev, val->port_vlan, &port);
664                 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
665                 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), (en ? (i == dev->cpu_port ? 0 : 1) : 1));
666                 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? (i == dev->cpu_port ? 2 : 1) : 3));
667                 if (i > 3)
668                         rtl_phy_restore(dev, val->port_vlan, &port);
669         }
670         rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
671
672         return 0;
673 }
674
675 static int
676 rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
677 {
678         val->value.i = rtl_get(dev, RTL_REG_VLAN_ENABLE);
679         return 0;
680 }
681
682 static int
683 rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
684 {
685         unsigned int mask = 0;
686         unsigned int oldmask;
687         int i;
688
689         for(i = 0; i < val->len; i++)
690         {
691                 struct switch_port *port = &val->value.ports[i];
692                 bool tagged = false;
693
694                 mask |= (1 << port->id);
695
696                 if (port->id == dev->cpu_port)
697                         continue;
698
699                 if ((i == dev->cpu_port) ||
700                         (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
701                         tagged = true;
702
703                 /* fix up PVIDs for added ports */
704                 if (!tagged)
705                         rtl_set(dev, RTL_PORT_REG(port->id, PVID), val->port_vlan);
706
707                 rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
708                 rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
709                 rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
710         }
711
712         oldmask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
713         rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
714
715         /* fix up PVIDs for removed ports, default to last vlan */
716         oldmask &= ~mask;
717         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
718                 if (!(oldmask & (1 << i)))
719                         continue;
720
721                 if (i == dev->cpu_port)
722                         continue;
723
724                 if (rtl_get(dev, RTL_PORT_REG(i, PVID)) == val->port_vlan)
725                         rtl_set(dev, RTL_PORT_REG(i, PVID), dev->vlans - 1);
726         }
727
728         return 0;
729 }
730
731 static struct switch_attr rtl_globals[] = {
732         {
733                 .type = SWITCH_TYPE_INT,
734                 .name = "enable_vlan",
735                 .description = "Enable VLAN mode",
736                 .max = 1,
737                 .set = rtl_set_vlan,
738                 .get = rtl_get_vlan,
739         },
740         {
741                 RTL_GLOBAL_REGATTR(EN_TRUNK),
742                 .name = "trunk",
743                 .description = "Enable port trunking",
744                 .max = 1,
745         },
746         {
747                 RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
748                 .name = "trunk_sel",
749                 .description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
750                 .max = 1,
751         },
752 #ifdef DEBUG
753         {
754                 RTL_GLOBAL_REGATTR(VLAN_FILTER),
755                 .name = "vlan_filter",
756                 .description = "Filter incoming packets for allowed VLANS",
757                 .max = 1,
758         },
759         {
760                 .type = SWITCH_TYPE_INT,
761                 .name = "cpuport",
762                 .description = "CPU Port",
763                 .set = rtl_set_cpuport,
764                 .get = rtl_get_cpuport,
765                 .max = RTL8306_NUM_PORTS,
766         },
767         {
768                 .type = SWITCH_TYPE_INT,
769                 .name = "use_cpuport",
770                 .description = "CPU Port handling flag",
771                 .set = rtl_set_use_cpuport,
772                 .get = rtl_get_use_cpuport,
773                 .max = RTL8306_NUM_PORTS,
774         },
775         {
776                 RTL_GLOBAL_REGATTR(TRAP_CPU),
777                 .name = "trap_cpu",
778                 .description = "VLAN trap to CPU",
779                 .max = 1,
780         },
781         {
782                 RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
783                 .name = "vlan_tag_aware",
784                 .description = "Enable VLAN tag awareness",
785                 .max = 1,
786         },
787         {
788                 RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
789                 .name = "tag_only",
790                 .description = "Only accept tagged packets",
791                 .max = 1,
792         },
793 #endif
794 };
795 static struct switch_attr rtl_port[] = {
796         {
797                 RTL_PORT_REGATTR(PVID),
798                 .name = "pvid",
799                 .description = "Port VLAN ID",
800                 .max = RTL8306_NUM_VLANS - 1,
801         },
802 #ifdef DEBUG
803         {
804                 RTL_PORT_REGATTR(NULL_VID_REPLACE),
805                 .name = "null_vid",
806                 .description = "NULL VID gets replaced by port default vid",
807                 .max = 1,
808         },
809         {
810                 RTL_PORT_REGATTR(NON_PVID_DISCARD),
811                 .name = "non_pvid_discard",
812                 .description = "discard packets with VID != PVID",
813                 .max = 1,
814         },
815         {
816                 RTL_PORT_REGATTR(VID_INSERT),
817                 .name = "vid_insert_remove",
818                 .description = "how should the switch insert and remove vids ?",
819                 .max = 3,
820         },
821         {
822                 RTL_PORT_REGATTR(TAG_INSERT),
823                 .name = "tag_insert",
824                 .description = "tag insertion handling",
825                 .max = 3,
826         },
827 #endif
828 };
829
830 static struct switch_attr rtl_vlan[] = {
831         {
832                 RTL_VLAN_REGATTR(VID),
833                 .name = "vid",
834                 .description = "VLAN ID (1-4095)",
835                 .max = 4095,
836         },
837 };
838
839 static const struct switch_dev_ops rtl8306_ops = {
840         .attr_global = {
841                 .attr = rtl_globals,
842                 .n_attr = ARRAY_SIZE(rtl_globals),
843         },
844         .attr_port = {
845                 .attr = rtl_port,
846                 .n_attr = ARRAY_SIZE(rtl_port),
847         },
848         .attr_vlan = {
849                 .attr = rtl_vlan,
850                 .n_attr = ARRAY_SIZE(rtl_vlan),
851         },
852
853         .get_vlan_ports = rtl_get_ports,
854         .set_vlan_ports = rtl_set_ports,
855         .apply_config = rtl_hw_apply,
856         .reset_switch = rtl_reset,
857         .get_port_link = rtl_get_port_link,
858 };
859
860 static int
861 rtl8306_config_init(struct phy_device *pdev)
862 {
863         struct net_device *netdev = pdev->attached_dev;
864         struct rtl_priv *priv = pdev->priv;
865         struct switch_dev *dev = &priv->dev;
866         struct switch_val val;
867         unsigned int chipid, chipver, chiptype;
868         int err;
869
870         /* Only init the switch for the primary PHY */
871         if (pdev->addr != 0)
872                 return 0;
873
874         val.value.i = 1;
875         priv->dev.cpu_port = RTL8306_PORT_CPU;
876         priv->dev.ports = RTL8306_NUM_PORTS;
877         priv->dev.vlans = RTL8306_NUM_VLANS;
878         priv->dev.ops = &rtl8306_ops;
879         priv->do_cpu = 0;
880         priv->page = -1;
881         priv->bus = pdev->bus;
882
883         chipid = rtl_get(dev, RTL_REG_CHIPID);
884         chipver = rtl_get(dev, RTL_REG_CHIPVER);
885         chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
886         switch(chiptype) {
887         case 0:
888         case 2:
889                 strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
890                 priv->type = RTL_TYPE_S;
891                 break;
892         case 1:
893                 strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
894                 priv->type = RTL_TYPE_SD;
895                 break;
896         case 3:
897                 strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
898                 priv->type = RTL_TYPE_SDM;
899                 break;
900         default:
901                 strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
902                 break;
903         }
904
905         dev->name = priv->hwname;
906         rtl_hw_init(dev);
907
908         printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
909
910         err = register_switch(dev, netdev);
911         if (err < 0) {
912                 kfree(priv);
913                 return err;
914         }
915
916         return 0;
917 }
918
919
920 static int
921 rtl8306_fixup(struct phy_device *pdev)
922 {
923         struct rtl_priv priv;
924         u16 chipid;
925
926         /* Attach to primary LAN port and WAN port */
927         if (pdev->addr != 0 && pdev->addr != 4)
928                 return 0;
929
930         memset(&priv, 0, sizeof(priv));
931         priv.fixup = true;
932         priv.page = -1;
933         priv.bus = pdev->bus;
934         chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
935         if (chipid == 0x5988)
936                 pdev->phy_id = RTL8306_MAGIC;
937
938         return 0;
939 }
940
941 static int
942 rtl8306_probe(struct phy_device *pdev)
943 {
944         struct rtl_priv *priv;
945
946         list_for_each_entry(priv, &phydevs, list) {
947                 /*
948                  * share one rtl_priv instance between virtual phy
949                  * devices on the same bus
950                  */
951                 if (priv->bus == pdev->bus)
952                         goto found;
953         }
954         priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
955         if (!priv)
956                 return -ENOMEM;
957
958         priv->bus = pdev->bus;
959
960 found:
961         pdev->priv = priv;
962         return 0;
963 }
964
965 static void
966 rtl8306_remove(struct phy_device *pdev)
967 {
968         struct rtl_priv *priv = pdev->priv;
969         unregister_switch(&priv->dev);
970         kfree(priv);
971 }
972
973 static int
974 rtl8306_config_aneg(struct phy_device *pdev)
975 {
976         struct rtl_priv *priv = pdev->priv;
977
978         /* Only for WAN */
979         if (pdev->addr == 0)
980                 return 0;
981
982         /* Restart autonegotiation */
983         rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1);
984         rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1);
985
986         return 0;
987 }
988
989 static int
990 rtl8306_read_status(struct phy_device *pdev)
991 {
992         struct rtl_priv *priv = pdev->priv;
993         struct switch_dev *dev = &priv->dev;
994
995         if (pdev->addr == 4) {
996                 /* WAN */
997                 pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
998                 pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
999                 pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK));
1000         } else {
1001                 /* LAN */
1002                 pdev->speed = SPEED_100;
1003                 pdev->duplex = DUPLEX_FULL;
1004                 pdev->link = 1;
1005         }
1006
1007         /*
1008          * Bypass generic PHY status read,
1009          * it doesn't work with this switch
1010          */
1011         if (pdev->link) {
1012                 pdev->state = PHY_RUNNING;
1013                 netif_carrier_on(pdev->attached_dev);
1014                 pdev->adjust_link(pdev->attached_dev);
1015         } else {
1016                 pdev->state = PHY_NOLINK;
1017                 netif_carrier_off(pdev->attached_dev);
1018                 pdev->adjust_link(pdev->attached_dev);
1019         }
1020
1021         return 0;
1022 }
1023
1024
1025 static struct phy_driver rtl8306_driver = {
1026         .name           = "Realtek RTL8306S",
1027         .flags          = PHY_HAS_MAGICANEG,
1028         .phy_id         = RTL8306_MAGIC,
1029         .phy_id_mask    = 0xffffffff,
1030         .features       = PHY_BASIC_FEATURES,
1031         .probe          = &rtl8306_probe,
1032         .remove         = &rtl8306_remove,
1033         .config_init    = &rtl8306_config_init,
1034         .config_aneg    = &rtl8306_config_aneg,
1035         .read_status    = &rtl8306_read_status,
1036         .driver         = { .owner = THIS_MODULE,},
1037 };
1038
1039
1040 static int __init
1041 rtl_init(void)
1042 {
1043         phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
1044         return phy_driver_register(&rtl8306_driver);
1045 }
1046
1047 static void __exit
1048 rtl_exit(void)
1049 {
1050         phy_driver_unregister(&rtl8306_driver);
1051 }
1052
1053 module_init(rtl_init);
1054 module_exit(rtl_exit);
1055 MODULE_LICENSE("GPL");
1056