target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -512,6 +512,114 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct board_info __initdata board_gw6200 = {
   8 +       .name                           = "GW6200",
   9 +       .of_board_id                    = "tecom,gw6200",
  10 +       .expected_cpu_id                = 0x6348,
  11 +
  12 +       .has_uart0                      = 1,
  13 +       .has_enet0                      = 1,
  14 +       .has_enet1                      = 1,
  15 +       .has_pci                        = 1,
  16 +
  17 +       .enet0 = {
  18 +               .has_phy                = 1,
  19 +               .use_internal_phy       = 1,
  20 +       },
  21 +       .enet1 = {
  22 +               .force_speed_100        = 1,
  23 +               .force_duplex_full      = 1,
  24 +       },
  25 +
  26 +       .has_ohci0 = 1,
  27 +
  28 +       .has_dsp                        = 1,
  29 +               .dsp = {
  30 +               .gpio_rst               = 8, /* FIXME: What is real GPIO here? */
  31 +               .gpio_int               = 34,
  32 +               .ext_irq                = 2,
  33 +               .cs                     = 2,
  34 +       },
  35 +
  36 +       .leds = {
  37 +               {
  38 +                       .name           = "GW6200:green:line1",
  39 +                       .gpio           = 4,
  40 +                       .active_low     = 1,
  41 +               },
  42 +               {
  43 +                       .name           = "GW6200:green:line2",
  44 +                       .gpio           = 5,
  45 +                       .active_low     = 1,
  46 +               },
  47 +               {
  48 +                       .name           = "GW6200:green:line3",
  49 +                       .gpio           = 6,
  50 +                       .active_low     = 1,
  51 +               },
  52 +               {
  53 +                       .name           = "GW6200:green:tel",
  54 +                       .gpio           = 7,
  55 +                       .active_low     = 1,
  56 +               },
  57 +       },
  58 +       .buttons = {
  59 +               {
  60 +                       .desc           = "reset",
  61 +                       .gpio           = 36,
  62 +                       .active_low     = 1,
  63 +                       .type           = EV_KEY,
  64 +                       .code           = KEY_RESTART,
  65 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  66 +               },
  67 +       },
  68 +};
  69 +
  70 +static struct board_info __initdata board_gw6000 = {
  71 +       .name                           = "GW6000",
  72 +       .of_board_id                    = "tecom,gw6000",
  73 +       .expected_cpu_id                = 0x6348,
  74 +
  75 +       .has_uart0                      = 1,
  76 +       .has_enet0                      = 1,
  77 +       .has_enet1                      = 1,
  78 +       .has_pci                        = 1,
  79 +
  80 +       .enet0 = {
  81 +               .has_phy                = 1,
  82 +               .use_internal_phy       = 1,
  83 +       },
  84 +       .enet1 = {
  85 +               .force_speed_100        = 1,
  86 +               .force_duplex_full      = 1,
  87 +       },
  88 +
  89 +       .has_ohci0 = 1,
  90 +
  91 +       .has_dsp                        = 1,
  92 +       .dsp = {
  93 +               .gpio_rst               = 6,
  94 +               .gpio_int               = 34,
  95 +               .ext_irq                = 2,
  96 +               .cs                     = 2,
  97 +       },
  98 +
  99 +       /* GW6000 has no GPIO-controlled leds */
 100 +
 101 +       .buttons = {
 102 +               {
 103 +                       .desc           = "reset",
 104 +                       .gpio           = 36,
 105 +                       .active_low     = 1,
 106 +                       .type           = EV_KEY,
 107 +                       .code           = KEY_RESTART,
 108 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 109 +               },
 110 +       },
 111 +};
 112 +
 113 +
 114 +
 115  static struct board_info __initdata board_FAST2404 = {
 116         .name                           = "F@ST2404",
 117         .of_board_id                    = "sagem,f@st2404",
 118 @@ -1314,6 +1422,8 @@ static const struct board_info __initcon
 119  #ifdef CONFIG_BCM63XX_CPU_6348
 120         &board_96348r,
 121         &board_96348gw,
 122 +       &board_gw6000,
 123 +       &board_gw6200,
 124         &board_96348gw_10,
 125         &board_96348gw_11,
 126         &board_FAST2404,