Flatten brcm63xx patches, should make our life easier to patch files now ;)
[openwrt.git] / target / linux / brcm63xx / files / arch / mips / bcm63xx / boards / board_bcm963xx.c
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7  */
8
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/string.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <asm/addrspace.h>
17 #include <bcm63xx_board.h>
18 #include <bcm63xx_cpu.h>
19 #include <bcm63xx_regs.h>
20 #include <bcm63xx_io.h>
21 #include <bcm63xx_board.h>
22 #include <bcm63xx_dev_pci.h>
23 #include <bcm63xx_dev_uart.h>
24 #include <bcm63xx_dev_enet.h>
25 #include <bcm63xx_dev_pcmcia.h>
26 #include <bcm63xx_dev_usb_ohci.h>
27 #include <bcm63xx_dev_usb_ehci.h>
28 #include <board_bcm963xx.h>
29
30 #define PFX     "board_bcm963xx: "
31
32 static struct bcm963xx_nvram nvram;
33 static unsigned int mac_addr_used = 0;
34 static struct board_info board;
35
36 /*
37  * known 6348 boards
38  */
39 #ifdef CONFIG_BCM63XX_CPU_6348
40 static struct board_info __initdata board_96348r = {
41         .name                           = "96348R",
42         .expected_cpu_id                = 0x6348,
43
44         .has_enet0                      = 1,
45         .has_pci                        = 1,
46
47         .enet0 = {
48                 .has_phy                = 1,
49                 .use_internal_phy       = 1,
50         },
51 };
52
53 static struct board_info __initdata board_96348gw_11 = {
54         .name                           = "96348GW-11",
55         .expected_cpu_id                = 0x6348,
56
57         .has_enet0                      = 1,
58         .has_enet1                      = 1,
59         .has_pci                        = 1,
60
61         .enet0 = {
62                 .has_phy                = 1,
63                 .use_internal_phy       = 1,
64         },
65
66         .enet1 = {
67                 .force_speed_100        = 1,
68                 .force_duplex_full      = 1,
69         },
70
71
72         .has_ohci0 = 1,
73         .has_pccard = 1,
74         .has_ehci0 = 1,
75 };
76
77 static struct board_info __initdata board_96348gw = {
78         .name                           = "96348GW",
79         .expected_cpu_id                = 0x6348,
80
81         .has_enet0                      = 1,
82         .has_enet1                      = 1,
83         .has_pci                        = 1,
84
85         .enet0 = {
86                 .has_phy                = 1,
87                 .use_internal_phy       = 1,
88         },
89         .enet1 = {
90                 .force_speed_100        = 1,
91                 .force_duplex_full      = 1,
92         },
93 };
94 #endif
95
96 /*
97  * known 6358 boards
98  */
99 #ifdef CONFIG_BCM63XX_CPU_6358
100 static struct board_info __initdata board_96358vw = {
101         .name                           = "96358VW",
102         .expected_cpu_id                = 0x6358,
103
104         .has_enet0                      = 1,
105         .has_enet1                      = 1,
106         .has_pci                        = 1,
107
108         .enet0 = {
109                 .has_phy                = 1,
110                 .use_internal_phy       = 1,
111         },
112
113         .enet1 = {
114                 .force_speed_100        = 1,
115                 .force_duplex_full      = 1,
116         },
117
118
119         .has_ohci0 = 1,
120         .has_pccard = 1,
121         .has_ehci0 = 1,
122 };
123
124 static struct board_info __initdata board_96358vw2 = {
125         .name                           = "96358VW2",
126         .expected_cpu_id                = 0x6358,
127
128         .has_enet0                      = 1,
129         .has_enet1                      = 1,
130         .has_pci                        = 1,
131
132         .enet0 = {
133                 .has_phy                = 1,
134                 .use_internal_phy       = 1,
135         },
136
137         .enet1 = {
138                 .force_speed_100        = 1,
139                 .force_duplex_full      = 1,
140         },
141
142
143         .has_ohci0 = 1,
144         .has_pccard = 1,
145         .has_ehci0 = 1,
146 };
147 #endif
148
149 /*
150  * all boards
151  */
152 static const struct board_info __initdata *bcm963xx_boards[] = {
153 #ifdef CONFIG_BCM63XX_CPU_6348
154         &board_96348r,
155         &board_96348gw,
156         &board_96348gw_11,
157 #endif
158
159 #ifdef CONFIG_BCM63XX_CPU_6358
160         &board_96358vw,
161         &board_96358vw2,
162 #endif
163 };
164
165 /*
166  * early init callback, read nvram data from flash and checksum it
167  */
168 void __init board_prom_init(void)
169 {
170         unsigned int check_len, i;
171         u8 *boot_addr, *cfe, *p;
172         char cfe_version[32];
173         u32 val;
174
175         /* read base address of boot chip select (0) */
176         val = bcm_mpi_readl(MPI_CSBASE_REG(0));
177         val &= MPI_CSBASE_BASE_MASK;
178         boot_addr = (u8 *)KSEG1ADDR(val);
179
180         /* dump cfe version */
181         cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
182         if (!memcmp(cfe, "cfe-v", 5))
183                 snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
184                          cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
185         else
186                 strcpy(cfe_version, "unknown");
187         printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
188
189         /* extract nvram data */
190         memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
191
192         /* check checksum before using data */
193         if (nvram.version <= 4)
194                 check_len = offsetof(struct bcm963xx_nvram, checksum_old);
195         else
196                 check_len = sizeof(nvram);
197         val = 0;
198         p = (u8 *)&nvram;
199         while (check_len--)
200                 val += *p;
201         if (val) {
202                 printk(KERN_ERR PFX "invalid nvram checksum\n");
203                 return;
204         }
205
206         /* find board by name */
207         for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
208                 if (strncmp(nvram.name, bcm963xx_boards[i]->name,
209                             sizeof(nvram.name)))
210                         continue;
211                 /* copy, board desc array is marked initdata */
212                 memcpy(&board, bcm963xx_boards[i], sizeof(board));
213                 break;
214         }
215
216         /* bail out if board is not found, will complain later */
217         if (!board.name[0]) {
218                 char name[17];
219                 memcpy(name, nvram.name, 16);
220                 name[16] = 0;
221                 printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
222                        name);
223                 return;
224         }
225
226         /* setup pin multiplexing depending on board enabled device,
227          * this has to be done this early since PCI init is done
228          * inside arch_initcall */
229         val = 0;
230
231         if (board.has_pci) {
232                 bcm63xx_pci_enabled = 1;
233                 if (BCMCPU_IS_6348())
234                         val |= GPIO_MODE_6348_G2_PCI;
235         }
236
237         if (board.has_pccard) {
238                 if (BCMCPU_IS_6348())
239                         val |= GPIO_MODE_6348_G1_MII_PCCARD;
240         }
241
242         if (board.has_enet0 && !board.enet0.use_internal_phy) {
243                 if (BCMCPU_IS_6348())
244                         val |= GPIO_MODE_6348_G3_EXT_MII |
245                                 GPIO_MODE_6348_G0_EXT_MII;
246         }
247
248         if (board.has_enet1 && !board.enet1.use_internal_phy) {
249                 if (BCMCPU_IS_6348())
250                         val |= GPIO_MODE_6348_G3_EXT_MII |
251                                 GPIO_MODE_6348_G0_EXT_MII;
252         }
253
254         bcm_gpio_writel(val, GPIO_MODE_REG);
255 }
256
257 /*
258  * second stage init callback, good time to panic if we couldn't
259  * identify on which board we're running since early printk is working
260  */
261 void __init board_setup(void)
262 {
263         if (!board.name[0])
264                 panic("unable to detect bcm963xx board");
265         printk(KERN_INFO PFX "board name: %s\n", board.name);
266
267         /* make sure we're running on expected cpu */
268         if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
269                 panic("unexpected CPU for bcm963xx board");
270 }
271
272 /*
273  * return board name for /proc/cpuinfo
274  */
275 const char *board_get_name(void)
276 {
277         return board.name;
278 }
279
280 /*
281  * register & return a new board mac address
282  */
283 static int board_get_mac_address(u8 *mac)
284 {
285         u8 *p;
286         int count;
287
288         if (mac_addr_used >= nvram.mac_addr_count) {
289                 printk(KERN_ERR PFX "not enough mac address\n");
290                 return -ENODEV;
291         }
292
293         memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
294         p = mac + ETH_ALEN - 1;
295         count = mac_addr_used;
296
297         while (count--) {
298                 do {
299                         (*p)++;
300                         if (*p != 0)
301                                 break;
302                         p--;
303                 } while (p != mac);
304         }
305
306         if (p == mac) {
307                 printk(KERN_ERR PFX "unable to fetch mac address\n");
308                 return -ENODEV;
309         }
310
311         mac_addr_used++;
312         return 0;
313 }
314
315 static struct mtd_partition mtd_partitions[] = {
316         {
317                 .name           = "cfe",
318                 .offset         = 0x0,
319                 .size           = 0x40000,
320         }
321 };
322
323 static struct physmap_flash_data flash_data = {
324         .width                  = 2,
325         .nr_parts               = ARRAY_SIZE(mtd_partitions),
326         .parts                  = mtd_partitions,
327 };
328
329 static struct resource mtd_resources[] = {
330         {
331                 .start          = 0,    /* filled at runtime */
332                 .end            = 0,    /* filled at runtime */
333                 .flags          = IORESOURCE_MEM,
334         }
335 };
336
337 static struct platform_device mtd_dev = {
338         .name                   = "physmap-flash",
339         .resource               = mtd_resources,
340         .num_resources          = ARRAY_SIZE(mtd_resources),
341         .dev                    = {
342                 .platform_data  = &flash_data,
343         },
344 };
345
346 /*
347  * third stage init callback, register all board devices.
348  */
349 int __init board_register_devices(void)
350 {
351         u32 val;
352
353         bcm63xx_uart_register();
354
355         if (board.has_pccard)
356                 bcm63xx_pcmcia_register();
357
358         if (board.has_enet0 &&
359             !board_get_mac_address(board.enet0.mac_addr))
360                 bcm63xx_enet_register(0, &board.enet0);
361
362         if (board.has_enet1 &&
363             !board_get_mac_address(board.enet1.mac_addr))
364                 bcm63xx_enet_register(1, &board.enet1);
365
366         if (board.has_ohci0)
367                 bcm63xx_ohci_register();
368
369         if (board.has_ehci0)
370                 bcm63xx_ehci_register();
371
372
373         /* read base address of boot chip select (0) */
374         val = bcm_mpi_readl(MPI_CSBASE_REG(0));
375         val &= MPI_CSBASE_BASE_MASK;
376         mtd_resources[0].start = val;
377         mtd_resources[0].end = 0x1FFFFFFF;
378
379         platform_device_register(&mtd_dev);
380
381         return 0;
382 }
383