target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch

   1 diff -urN linux-2.6.19/drivers/i2c/busses/Kconfig linux-2.6.19.new/drivers/i2c/busses/Kconfig
   2 --- linux-2.6.19/drivers/i2c/busses/Kconfig     2006-11-29 22:57:37.000000000 +0100
   3 +++ linux-2.6.19.new/drivers/i2c/busses/Kconfig 2006-12-28 17:04:34.000000000 +0100
   4 @@ -84,6 +84,17 @@
   5           This driver can also be built as a module.  If so, the module
   6           will be called i2c-au1550.
   7
   8 +config I2C_AU1X00GPIO
   9 +       tristate "Au1x00 i2c using GPIO pins"
  10 +       depends on I2C
  11 +       select I2C_ALGOBIT
  12 +       help
  13 +         If you say yest to this option, support will be included for the
  14 +         Au1x00 GPIO interface.
  15 +
  16 +         This driver can also be built as a module. If so, the module
  17 +         will be called i2c-au1x00gpio.
  18 +
  19  config I2C_ELEKTOR
  20         tristate "Elektor ISA card"
  21         depends on I2C && ISA && BROKEN_ON_SMP
  22 diff -urN linux-2.6.19/drivers/i2c/busses/Makefile linux-2.6.19.new/drivers/i2c/busses/Makefile
  23 --- linux-2.6.19/drivers/i2c/busses/Makefile    2006-11-29 22:57:37.000000000 +0100
  24 +++ linux-2.6.19.new/drivers/i2c/busses/Makefile        2006-12-28 03:07:37.000000000 +0100
  25 @@ -9,6 +9,7 @@
  26  obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
  27  obj-$(CONFIG_I2C_AMD8111)      += i2c-amd8111.o
  28  obj-$(CONFIG_I2C_AU1550)       += i2c-au1550.o
  29 +obj-$(CONFIG_I2C_AU1X00GPIO)   += i2c-au1x00gpio.o
  30  obj-$(CONFIG_I2C_ELEKTOR)      += i2c-elektor.o
  31  obj-$(CONFIG_I2C_HYDRA)                += i2c-hydra.o
  32  obj-$(CONFIG_I2C_I801)         += i2c-i801.o
  33 diff -urN linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c
  34 --- linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c    1970-01-01 01:00:00.000000000 +0100
  35 +++ linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c        2006-12-28 17:02:10.000000000 +0100
  36 @@ -0,0 +1,406 @@
  37 +/* ------------------------------------------------------------------------- */
  38 +/* i2c-au1x00gpio.c i2c-hw access for Au1x00 GPIO pins.                      */
  39 +/* ------------------------------------------------------------------------- */
  40 +/*   Copyright (C) 1995-2000 Michael Stickel
  41 +
  42 +    This program is free software; you can redistribute it and/or modify
  43 +    it under the terms of the GNU General Public License as published by
  44 +    the Free Software Foundation; either version 2 of the License, or
  45 +    (at your option) any later version.
  46 +
  47 +    This program is distributed in the hope that it will be useful,
  48 +    but WITHOUT ANY WARRANTY; without even the implied warranty of
  49 +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  50 +    GNU General Public License for more details.
  51 +
  52 +    You should have received a copy of the GNU General Public License
  53 +    along with this program; if not, write to the Free Software
  54 +    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               */
  55 +/* ------------------------------------------------------------------------- */
  56 +
  57 +/* With some changes from Ky�stialkki <kmalkki@cc.hut.fi> and even
  58 +   Frodo Looijaard <frodol@dds.nl>
  59 +   Simon G. Vogl
  60 +*/
  61 +
  62 +/* $Id: i2c-au1x00gpio.c,v 1.1.1.2 2004/01/22 15:35:47 br1 Exp $ */
  63 +
  64 +#include <linux/module.h>
  65 +#include <linux/types.h>
  66 +#include <linux/kernel.h>
  67 +#include <linux/init.h>
  68 +#include <linux/stddef.h>
  69 +#include <linux/ioport.h>
  70 +#include <asm/uaccess.h>
  71 +#include <asm/io.h>
  72 +#include <asm-mips/mach-au1x00/au1000.h>
  73 +#include <asm-mips/mach-au1x00/au1000_gpio.h>
  74 +
  75 +#include <linux/slab.h>
  76 +#include <linux/mm.h>
  77 +
  78 +#include <linux/i2c.h>
  79 +#include <linux/i2c-algo-bit.h>
  80 +
  81 +struct i2c_au1x00gpio
  82 +{
  83 +       struct i2c_au1x00gpio *next;
  84 +
  85 +       short  scl_gpio;
  86 +       short  sda_gpio;
  87 +
  88 +       unsigned long scl_mask;
  89 +       unsigned long sda_mask;
  90 +
  91 +       struct i2c_adapter adapter;
  92 +       struct i2c_algo_bit_data bit_au1x00gpio_data;
  93 +};
  94 +
  95 +static struct i2c_au1x00gpio *adapter_list;
  96 +
  97 +
  98 +
  99 +/* ----- global defines -----------------------------------------------        */
 100 +#define DEB(x)         /* should be reasonable open, close &c.         */
 101 +#define DEB2(x)        /* low level debugging - very slow              */
 102 +#define DEBE(x)        x       /* error messages                               */
 103 +
 104 +/* ----- printer port defines ------------------------------------------*/
 105 +
 106 +/* ----- local functions ----------------------------------------------        */
 107 +
 108 +
 109 +//-- Primary GPIO
 110 +static void bit_au1x00gpio_setscl(void *data, int state)
 111 +{
 112 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 113 +  if (state)
 114 +    au_writel(adapter->scl_mask, SYS_TRIOUTCLR); // Disable Driver: Switch off Transistor => 1
 115 +  else
 116 +    au_writel(adapter->scl_mask, SYS_OUTPUTCLR); // Clear Output and switch on Transistor => 0
 117 +}
 118 +
 119 +
 120 +static void bit_au1x00gpio_setsda(void *data, int state)
 121 +{
 122 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 123 +  if (state)
 124 +    au_writel(adapter->sda_mask, SYS_TRIOUTCLR);
 125 +  else
 126 +    au_writel(adapter->sda_mask, SYS_OUTPUTCLR);
 127 +}
 128 +
 129 +
 130 +static int bit_au1x00gpio_getscl(void *data)
 131 +{
 132 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 133 +  return (au_readl(SYS_PINSTATERD) & adapter->scl_mask) ? 1 : 0;
 134 +}
 135 +
 136 +
 137 +static int bit_au1x00gpio_getsda(void *data)
 138 +{
 139 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 140 +  return (au_readl(SYS_PINSTATERD) & adapter->sda_mask) ? 1 : 0;
 141 +}
 142 +
 143 +
 144 +
 145 +
 146 +/*--
 147 + *-- Functions for accessing GPIO-2
 148 + *--
 149 + */
 150 +static void bit_au1x00gpio2_setscl(void *data, int state)
 151 +{
 152 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 153 +  if (state)
 154 +    {
 155 +      au_writel(au_readl(GPIO2_DIR) & ~adapter->scl_mask, GPIO2_DIR);
 156 +    }
 157 +  else
 158 +    {
 159 +      au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->scl_mask, GPIO2_OUTPUT);
 160 +      au_writel(au_readl(GPIO2_DIR) | adapter->scl_mask, GPIO2_DIR);
 161 +    }
 162 +}
 163 +
 164 +static void bit_au1x00gpio2_setsda(void *data, int state)
 165 +{
 166 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 167 +  if (state)
 168 +    {
 169 +      au_writel(au_readl(GPIO2_DIR) & ~adapter->sda_mask, GPIO2_DIR);
 170 +    }
 171 +  else
 172 +    {
 173 +      au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->sda_mask, GPIO2_OUTPUT);
 174 +      au_writel(au_readl(GPIO2_DIR) | adapter->sda_mask, GPIO2_DIR);
 175 +    }
 176 +}
 177 +
 178 +static int bit_au1x00gpio2_getscl(void *data)
 179 +{
 180 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 181 +  return (au_readl(GPIO2_PINSTATE) & adapter->scl_mask) ? 1 : 0;
 182 +}
 183 +
 184 +static int bit_au1x00gpio2_getsda(void *data)
 185 +{
 186 +  struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
 187 +  return (au_readl(GPIO2_PINSTATE) & adapter->sda_mask) ? 1 : 0;
 188 +}
 189 +
 190 +
 191 +
 192 +static int check_i2c_au1x00gpio_adapter(struct i2c_au1x00gpio *adapter)
 193 +{
 194 +  int state = 0;
 195 +
 196 +  adapter->bit_au1x00gpio_data.setsda (adapter, 1);
 197 +  adapter->bit_au1x00gpio_data.setscl (adapter, 1);
 198 +
 199 +  if (adapter->bit_au1x00gpio_data.getsda(adapter)==0)
 200 +    {
 201 +      printk ("i2c-au1x00gpio: sda line should read 1 but reads 0\n");
 202 +      state = -1;
 203 +    }
 204 +  if (adapter->bit_au1x00gpio_data.getscl(adapter)==0)
 205 +    {
 206 +      printk ("i2c-au1x00gpio: scl line should read 1 but reads 0\n");
 207 +      state = -1;
 208 +    }
 209 +
 210 +
 211 +  adapter->bit_au1x00gpio_data.setsda (adapter, 0);
 212 +  adapter->bit_au1x00gpio_data.setscl (adapter, 0);
 213 +
 214 +  if (adapter->bit_au1x00gpio_data.getsda(adapter)==1)
 215 +    {
 216 +      printk ("i2c-au1x00gpio: sda line should read 0 but reads 1\n");
 217 +      state = -1;
 218 +    }
 219 +  if (adapter->bit_au1x00gpio_data.getscl(adapter)==1)
 220 +    {
 221 +      printk ("i2c-au1x00gpio: scl line should read 0 but reads 1\n");
 222 +      state = -1;
 223 +    }
 224 +
 225 +  if (state==0)
 226 +    printk ("i2c-au1x00gpio: adapter with scl=GPIO%d,sda=GPIO%d is working\n",
 227 +           adapter->scl_gpio, adapter->sda_gpio
 228 +           );
 229 +  return state;
 230 +}
 231 +
 232 +
 233 +
 234 +#if 0
 235 +static int bit_au1x00gpio_reg(struct i2c_client *client)
 236 +{
 237 +       return 0;
 238 +}
 239 +
 240 +static int bit_au1x00gpio_unreg(struct i2c_client *client)
 241 +{
 242 +       return 0;
 243 +}
 244 +
 245 +static void bit_au1x00gpio_inc_use(struct i2c_adapter *adap)
 246 +{
 247 +       MOD_INC_USE_COUNT;
 248 +}
 249 +
 250 +static void bit_au1x00gpio_dec_use(struct i2c_adapter *adap)
 251 +{
 252 +       MOD_DEC_USE_COUNT;
 253 +}
 254 +#endif
 255 +
 256 +
 257 +
 258 +static struct i2c_algo_bit_data bit_au1x00gpio_data = {
 259 +       .data = NULL,
 260 +       .setsda = bit_au1x00gpio_setsda,
 261 +       .setscl = bit_au1x00gpio_setscl,
 262 +       .getsda = bit_au1x00gpio_getsda,
 263 +       .getscl = bit_au1x00gpio_getscl,
 264 +       .udelay = 80,
 265 +       .timeout = HZ,
 266 +};
 267 +
 268 +
 269 +static struct i2c_adapter bit_au1x00gpio_ops = {
 270 +        .owner          = THIS_MODULE,
 271 +        .name           = "Au1x00 GPIO I2C adapter",
 272 +        .id             = I2C_HW_B_AU1x00GPIO,
 273 +};
 274 +
 275 +
 276 +
 277 +/*
 278 + * scl_gpio:
 279 + *   0..31 for primary GPIO's
 280 + *   200..215 for secondary GPIO's
 281 + *
 282 + * sda_gpio:
 283 + *   0..31 for primary GPIO's
 284 + *   200..215 for secondary GPIO's
 285 + *
 286 + * You can even mix primary and secondary GPIO's.
 287 + * E.g.:  i2c_au1x00gpio_create(4,206);
 288 + */
 289 +
 290 +static int i2c_au1x00gpio_create (int scl_gpio, int sda_gpio)
 291 +{
 292 +  if ((scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215)) &&
 293 +      (scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215)))
 294 +    {
 295 +       struct i2c_au1x00gpio *adapter = kmalloc(sizeof(struct i2c_au1x00gpio),
 296 +                                         GFP_KERNEL);
 297 +       if (!adapter) {
 298 +               printk(KERN_ERR "i2c-au1x00-gpio: Unable to malloc.\n");
 299 +               return -1;
 300 +       }
 301 +
 302 +       printk(KERN_DEBUG "i2c-au1x00-gpio.o: attaching to SCL=GPIO%d, SDA=GPIO%d\n",
 303 +              scl_gpio, sda_gpio);
 304 +
 305 +       memset (adapter, 0, sizeof(struct i2c_au1x00gpio));
 306 +
 307 +       adapter->adapter = bit_au1x00gpio_ops;
 308 +
 309 +       adapter->adapter.algo_data = &adapter->bit_au1x00gpio_data;
 310 +       adapter->bit_au1x00gpio_data = bit_au1x00gpio_data;
 311 +       adapter->bit_au1x00gpio_data.data = adapter;
 312 +
 313 +       adapter->bit_au1x00gpio_data.data = adapter;
 314 +
 315 +       adapter->scl_gpio = scl_gpio;
 316 +       adapter->sda_gpio = sda_gpio;
 317 +
 318 +        if (sda_gpio < 32)
 319 +          {
 320 +           adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio_setsda;
 321 +           adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio_getsda;
 322 +            adapter->sda_mask = 1<<sda_gpio;
 323 +          }
 324 +        else if (sda_gpio >= 200 && sda_gpio <= 215)
 325 +          {
 326 +           adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio2_setsda;
 327 +           adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio2_getsda;
 328 +            adapter->sda_mask = 1<<(sda_gpio-200);
 329 +          }
 330 +
 331 +
 332 +        if (scl_gpio < 32)
 333 +          {
 334 +           adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio_setscl;
 335 +           adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio_getscl;
 336 +            adapter->scl_mask = 1<<scl_gpio;
 337 +          }
 338 +        else if (scl_gpio >= 200 && scl_gpio <= 215)
 339 +          {
 340 +           adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio2_setscl;
 341 +           adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio2_getscl;
 342 +            adapter->scl_mask = 1<<(scl_gpio-200);
 343 +          }
 344 +
 345 +       au_writel(0L, SYS_PININPUTEN);
 346 +       if (check_i2c_au1x00gpio_adapter(adapter)==0)
 347 +         {
 348 +           adapter->bit_au1x00gpio_data.setsda (adapter, 1);
 349 +           adapter->bit_au1x00gpio_data.setscl (adapter, 1);
 350 +
 351 +           if (i2c_bit_add_bus(&adapter->adapter) < 0)
 352 +             {
 353 +               printk(KERN_ERR "i2c-au1x00-gpio: Unable to register with I2C.\n");
 354 +               kfree(adapter);
 355 +               return -1;              /* No good */
 356 +             }
 357 +
 358 +           adapter->next = adapter_list;
 359 +           adapter_list = adapter;
 360 +           return 0;
 361 +         }
 362 +    }
 363 +  else
 364 +    printk(KERN_ERR "i2c-au1x00-gpio: Invalid argument scl_gpio=%d, sda_gpio=%d.\n", scl_gpio, sda_gpio);
 365 +  return -1;
 366 +}
 367 +
 368 +
 369 +
 370 +static void i2c_au1x00gpio_delete (int scl_gpio, int sda_gpio)
 371 +{
 372 +       struct i2c_au1x00gpio *adapter, *prev = NULL;
 373 +
 374 +       for (adapter = adapter_list; adapter; adapter = adapter->next)
 375 +       {
 376 +               if (adapter->scl_gpio == scl_gpio &&
 377 +                   adapter->sda_gpio == sda_gpio)
 378 +               {
 379 +                       i2c_bit_del_bus(&adapter->adapter);
 380 +                       if (prev)
 381 +                               prev->next = adapter->next;
 382 +                       else
 383 +                               adapter_list = adapter->next;
 384 +                       kfree(adapter);
 385 +                       return;
 386 +               }
 387 +               prev = adapter;
 388 +       }
 389 +}
 390 +
 391 +
 392 +
 393 +
 394 +
 395 +#ifndef CONFIG_I2C_AU1X00GPIO_SCL
 396 +#define CONFIG_I2C_AU1X00GPIO_SCL (210)
 397 +#endif
 398 +
 399 +#ifndef CONFIG_I2C_AU1X00GPIO_SDA
 400 +#define CONFIG_I2C_AU1X00GPIO_SDA (9)
 401 +#endif
 402 +
 403 +static int au1x00gpiopin_scl = CONFIG_I2C_AU1X00GPIO_SCL;
 404 +static int au1x00gpiopin_sda = CONFIG_I2C_AU1X00GPIO_SDA;
 405 +
 406 +
 407 +
 408 +static int __init i2c_bit_au1x00gpio_init(void)
 409 +{
 410 +  printk(KERN_INFO "i2c-au1x00gpio.o: i2c Au1x00 GPIO adapter module version\n");
 411 +
 412 +  if (i2c_au1x00gpio_create (au1x00gpiopin_scl, au1x00gpiopin_sda) == 0)
 413 +    {
 414 +      printk(KERN_INFO "i2c-au1x00gpio.o: registered I2C-Bus for GPIO%d,GPIO%d\n",
 415 +            au1x00gpiopin_scl, au1x00gpiopin_sda
 416 +            );
 417 +      return 0;
 418 +    }
 419 +  printk(KERN_INFO "i2c-au1x00gpio.o: failed to register I2C-Bus for GPIO%d,GPIO%d\n",
 420 +            au1x00gpiopin_scl, au1x00gpiopin_sda
 421 +        );
 422 +  return -1;
 423 +}
 424 +
 425 +
 426 +static void __exit i2c_bit_au1x00gpio_exit(void)
 427 +{
 428 +  i2c_au1x00gpio_delete (au1x00gpiopin_scl, au1x00gpiopin_sda);
 429 +}
 430 +
 431 +module_param(au1x00gpiopin_scl, int, 0644);
 432 +MODULE_PARM_DESC(au1x00gpiopin_scl, "GPIO pin number used for SCL pin.");
 433 +
 434 +module_param(au1x00gpiopin_sda, int, 0644);
 435 +MODULE_PARM_DESC(au1x00gpiopin_sda, "GPIO pin number used for SDA pin.");
 436 +
 437 +MODULE_AUTHOR("Michael Stickel <michael@cubic.org>");
 438 +MODULE_DESCRIPTION("I2C-Bus adapter routines for Au1x00 GPIO adapter.");
 439 +MODULE_LICENSE("GPL");
 440 +
 441 +module_init(i2c_bit_au1x00gpio_init);
 442 +module_exit(i2c_bit_au1x00gpio_exit);
 443 diff -urN linux-2.6.19/include/linux/i2c-id.h linux-2.6.19.new/include/linux/i2c-id.h
 444 --- linux-2.6.19/include/linux/i2c-id.h 2006-11-29 22:57:37.000000000 +0100
 445 +++ linux-2.6.19.new/include/linux/i2c-id.h     2006-12-28 03:12:15.000000000 +0100
 446 @@ -231,6 +231,9 @@
 447  /* --- Au1550 PSC adapters adapters                                    */
 448  #define I2C_HW_AU1550_PSC      0x1b0000
 449
 450 +/* --- Au1x00 i2c GPIO adapter                                         */
 451 +#define I2C_HW_B_AU1x00GPIO 0x1b
 452 +
 453  /* --- SMBus only adapters                                             */
 454  #define I2C_HW_SMBUS_PIIX4     0x040000
 455  #define I2C_HW_SMBUS_ALI15X3   0x040001