ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wa901nd.c
1 /*
2  *  TP-LINK TL-WA901ND board support
3  *
4  *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
5  *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
6  *
7  *  This program is free software; you can redistribute it and/or modify it
8  *  under the terms of the GNU General Public License version 2 as published
9  *  by the Free Software Foundation.
10  */
11
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14
15 #include <asm/mach-ar71xx/ar71xx.h>
16
17 #include "machtype.h"
18 #include "devices.h"
19 #include "dev-m25p80.h"
20 #include "dev-ap91-pci.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23
24 #define TL_WA901ND_GPIO_LED_QSS         0
25 #define TL_WA901ND_GPIO_LED_SYSTEM      1
26
27 #define TL_WA901ND_GPIO_BTN_RESET       11
28 #define TL_WA901ND_GPIO_BTN_QSS         12
29
30 #define TL_WA901ND_KEYS_POLL_INTERVAL   20      /* msecs */
31 #define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition tl_wa901nd_partitions[] = {
35         {
36                 .name           = "u-boot",
37                 .offset         = 0,
38                 .size           = 0x020000,
39                 .mask_flags     = MTD_WRITEABLE,
40         }, {
41                 .name           = "kernel",
42                 .offset         = 0x020000,
43                 .size           = 0x140000,
44         }, {
45                 .name           = "rootfs",
46                 .offset         = 0x160000,
47                 .size           = 0x290000,
48         }, {
49                 .name           = "art",
50                 .offset         = 0x3f0000,
51                 .size           = 0x010000,
52                 .mask_flags     = MTD_WRITEABLE,
53         }, {
54                 .name           = "firmware",
55                 .offset         = 0x020000,
56                 .size           = 0x3d0000,
57         }
58 };
59 #endif /* CONFIG_MTD_PARTITIONS */
60
61 static struct flash_platform_data tl_wa901nd_flash_data = {
62 #ifdef CONFIG_MTD_PARTITIONS
63         .parts          = tl_wa901nd_partitions,
64         .nr_parts       = ARRAY_SIZE(tl_wa901nd_partitions),
65 #endif
66 };
67
68 static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
69         {
70                 .name           = "tl-wa901nd:green:system",
71                 .gpio           = TL_WA901ND_GPIO_LED_SYSTEM,
72                 .active_low     = 1,
73         }, {
74                 .name           = "tl-wa901nd:green:qss",
75                 .gpio           = TL_WA901ND_GPIO_LED_QSS,
76                 .active_low     = 1,
77         }
78 };
79
80 static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
81         {
82                 .desc           = "reset",
83                 .type           = EV_KEY,
84                 .code           = BTN_0,
85                 .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
86                 .gpio           = TL_WA901ND_GPIO_BTN_RESET,
87                 .active_low     = 1,
88         }, {
89                 .desc           = "qss",
90                 .type           = EV_KEY,
91                 .code           = BTN_1,
92                 .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
93                 .gpio           = TL_WA901ND_GPIO_BTN_QSS,
94                 .active_low     = 1,
95         }
96 };
97
98 static void __init tl_wa901nd_setup(void)
99 {
100         u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
101         u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
102
103         /*
104          * ar71xx_eth0 would be the WAN port, but is not connected on
105          * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
106          * however we have a single LAN port only.
107          */
108         ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
109         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
110         ar71xx_eth1_data.speed       = SPEED_1000;
111         ar71xx_eth1_data.duplex      = DUPLEX_FULL;
112         ar71xx_eth1_data.has_ar7240_switch = 1;
113
114         ar71xx_add_device_mdio(0x0);
115         ar71xx_add_device_eth(1);
116
117         ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
118
119         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
120                                         tl_wa901nd_leds_gpio);
121
122         ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
123                                          ARRAY_SIZE(tl_wa901nd_gpio_keys),
124                                          tl_wa901nd_gpio_keys);
125
126         ap91_pci_init(ee, mac);
127 }
128
129 MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
130              tl_wa901nd_setup);