968d955e75bc0f470518641e39219a28d56290ba
[openwrt.git] / target / linux / ar7 / base-files / etc / config / network
1 # Copyright (C) 2006 OpenWrt.org
2
3 config interface loopback
4         option ifname   lo
5         option proto    static
6         option ipaddr   127.0.0.1
7         option netmask  255.0.0.0
8
9 config interface lan
10         option type     bridge
11         option ifname   "eth0 eth1 eth0.1 eth0.2"
12         option proto    static
13         option ipaddr   192.168.1.1
14         option netmask  255.255.255.0
15         option nat      1
16         option ip6assign 60
17
18 config interface wan6
19         option ifname   @wan
20         option proto    dhcpv6
21
22 config globals globals
23         option ula_prefix auto
24
25 ## Example for ATM bridging.
26 ## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'
27 #
28 # config atm-bridge
29 #       option unit     0
30 #       option encaps   llc
31 #       option vpi      8
32 #       option vci      35
33 #       option payload  bridged # some ISPs need this set to 'routed'
34
35
36 # config interface wan
37 ##      PPPoE:
38 #       option ifname   nas0
39 #       option proto    pppoe
40
41 ##      PPPoA:
42 #       option ifname   atm0
43 #       option proto    pppoa
44 #       option encaps   llc
45 #       option vpi      8
46 #       option vci      35
47
48 ##      Both:
49 #       option username "my_username"
50 #       option password "my_password"