target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c

   1 /*
   2  *  Mikrotik RouterBOARD 1xx series support
   3  *
   4  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  NAND initialization code was based on a driver for Linux 2.6.19+ which
   7  *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
   8  *  their RouterBoard 1xx and 5xx series boards.
   9  *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
  10  *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
  11  *
  12  *  This program is free software; you can redistribute it and/or modify it
  13  *  under the terms of the GNU General Public License version 2 as published
  14  *  by the Free Software Foundation.
  15  *
  16  */
  17
  18 #include "rb-1xx.h"
  19
  20 #define RB1XX_NAND_CHIP_DELAY   25
  21
  22 static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
  23         PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
  24         PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
  25         PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
  26 };
  27
  28 #ifdef CONFIG_MTD_PARTITIONS
  29 static struct mtd_partition rb1xx_nor_parts[] = {
  30         {
  31                 .name   = "booter",
  32                 .offset = 0,
  33                 .size   = 64*1024,
  34                 .mask_flags = MTD_WRITEABLE,
  35         } , {
  36                 .name   = "firmware",
  37                 .offset = MTDPART_OFS_APPEND,
  38                 .size   = MTDPART_SIZ_FULL,
  39         }
  40 };
  41
  42 static struct mtd_partition rb1xx_nand_parts[] = {
  43         {
  44                 .name   = "kernel",
  45                 .offset = 0,
  46                 .size   = 4 * 1024 * 1024,
  47         } , {
  48                 .name   = "rootfs",
  49                 .offset = MTDPART_OFS_NXTBLK,
  50                 .size   = MTDPART_SIZ_FULL
  51         }
  52 };
  53 #endif /* CONFIG_MTD_PARTITIONS */
  54
  55 /*
  56  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  57  * will not be able to find the kernel that we load.  So set the oobinfo
  58  * when creating the partitions
  59  */
  60 static struct nand_ecclayout rb1xx_nand_ecclayout = {
  61         .eccbytes       = 6,
  62         .eccpos         = { 8, 9, 10, 13, 14, 15 },
  63         .oobavail       = 9,
  64         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
  65 };
  66
  67 /*--------------------------------------------------------------------------*/
  68
  69 static int rb1xx_nand_fixup(struct mtd_info *mtd)
  70 {
  71         struct nand_chip *chip = mtd->priv;
  72
  73         if (mtd->writesize == 512)
  74                 chip->ecc.layout = &rb1xx_nand_ecclayout;
  75
  76         return 0;
  77 }
  78
  79 struct platform_nand_data rb1xx_nand_data __initdata = {
  80         .chip = {
  81                 .nr_chips       = 1,
  82 #ifdef CONFIG_MTD_PARTITIONS
  83                 .nr_partitions  = ARRAY_SIZE(rb1xx_nand_parts),
  84                 .partitions     = rb1xx_nand_parts,
  85 #endif /* CONFIG_MTD_PARTITIONS */
  86                 .chip_delay     = RB1XX_NAND_CHIP_DELAY,
  87                 .options        = NAND_NO_AUTOINCR,
  88                 .chip_fixup     = rb1xx_nand_fixup,
  89         },
  90 };
  91
  92 struct gpio_button rb1xx_gpio_buttons[] __initdata = {
  93         {
  94                 .desc           = "reset_button",
  95                 .type           = EV_KEY,
  96                 .code           = BTN_0,
  97                 .threshold      = 5,
  98                 .gpio           = ADM5120_GPIO_PIN7,
  99         }
 100 };
 101
 102 static void __init rb1xx_mac_setup(void)
 103 {
 104         if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
 105                 adm5120_setup_eth_macs(rb_hs.mac_base);
 106         } else {
 107                 u8 mac[ETH_ALEN];
 108
 109                 random_ether_addr(mac);
 110                 adm5120_setup_eth_macs(mac);
 111         }
 112 }
 113
 114 void __init rb1xx_add_device_flash(void)
 115 {
 116         /* setup data for flash0 device */
 117 #ifdef CONFIG_MTD_PARTITIONS
 118         adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
 119         adm5120_flash0_data.parts = rb1xx_nor_parts;
 120 #endif /* CONFIG_MTD_PARTITIONS */
 121         adm5120_flash0_data.window_size = 128*1024;
 122
 123         adm5120_add_device_flash(0);
 124 }
 125
 126 void __init rb1xx_add_device_nand(void)
 127 {
 128         /* enable NAND flash interface */
 129         adm5120_nand_enable();
 130
 131         /* initialize NAND chip */
 132         adm5120_nand_set_spn(1);
 133         adm5120_nand_set_wpn(0);
 134
 135         adm5120_add_device_nand(&rb1xx_nand_data);
 136 }
 137
 138 void __init rb1xx_generic_setup(void)
 139 {
 140         if (adm5120_package_bga())
 141                 adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
 142                                         rb1xx_pci_irqs);
 143
 144         adm5120_add_device_uart(0);
 145         adm5120_add_device_uart(1);
 146
 147         adm5120_add_device_gpio_buttons(ARRAY_SIZE(rb1xx_gpio_buttons),
 148                                         rb1xx_gpio_buttons);
 149
 150         rb1xx_add_device_flash();
 151         rb1xx_mac_setup();
 152 }