2 * Broadcom BCM5325E/536x switch configuration module
4 * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
5 * Based on 'robocfg' by Oleg I. Vdovikin
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version 2
10 * of the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 #include <linux/config.h>
24 #include <linux/module.h>
25 #include <linux/init.h>
27 #include <linux/if_arp.h>
28 #include <linux/sockios.h>
29 #include <linux/ethtool.h>
30 #include <linux/mii.h>
31 #include <asm/uaccess.h>
33 #include "switch-core.h"
36 #define DRIVER_NAME "bcm53xx"
37 #define DRIVER_VERSION "0.01"
39 #define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
42 #define REG_MII_PAGE 0x10 /* MII Page register */
43 #define REG_MII_ADDR 0x11 /* MII Address register */
44 #define REG_MII_DATA0 0x18 /* MII Data register 0 */
46 #define REG_MII_PAGE_ENABLE 1
47 #define REG_MII_ADDR_WRITE 1
48 #define REG_MII_ADDR_READ 2
50 /* Private et.o ioctls */
51 #define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
52 #define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
55 static int use_et = 0;
56 static int is_5350 = 0;
57 static struct ifreq ifr;
58 static struct net_device *dev;
59 static unsigned char port[6] = { 0, 1, 2, 3, 4, 8 };
61 static int do_ioctl(int cmd, void *buf)
63 mm_segment_t old_fs = get_fs();
67 ifr.ifr_data = (caddr_t) buf;
70 ret = dev->do_ioctl(dev, &ifr, cmd);
76 static u16 mdio_read(__u16 phy_id, __u8 reg)
79 int args[2] = { reg };
81 if (phy_id != ROBO_PHY_ADDR) {
83 "Access to real 'phy' registers unavaliable.\n"
84 "Upgrade kernel driver.\n");
90 if (do_ioctl(SIOCGETCPHYRD, &args) < 0) {
91 printk("[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__);
97 struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
101 if (do_ioctl(SIOCGMIIREG, NULL) < 0) {
102 printk("[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
111 static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
114 int args[2] = { reg, val };
116 if (phy_id != ROBO_PHY_ADDR) {
118 "Access to real 'phy' registers unavaliable.\n"
119 "Upgrade kernel driver.\n");
124 if (do_ioctl(SIOCSETCPHYWR, args) < 0) {
125 printk("[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__);
129 struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&ifr.ifr_data;
131 mii->phy_id = phy_id;
135 if (do_ioctl(SIOCSMIIREG, NULL) < 0) {
136 printk("[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
142 static int robo_reg(__u8 page, __u8 reg, __u8 op)
146 /* set page number */
147 mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
148 (page << 8) | REG_MII_PAGE_ENABLE);
150 /* set register address */
151 mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
154 /* check if operation completed */
156 if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
160 printk("[%s:%d] timeout in robo_reg!\n", __FILE__, __LINE__);
165 static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
169 robo_reg(page, reg, REG_MII_ADDR_READ);
171 for (i = 0; i < count; i++)
172 val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
175 static __u16 robo_read16(__u8 page, __u8 reg)
177 robo_reg(page, reg, REG_MII_ADDR_READ);
179 return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
182 static __u32 robo_read32(__u8 page, __u8 reg)
184 robo_reg(page, reg, REG_MII_ADDR_READ);
186 return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
187 (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
190 static void robo_write16(__u8 page, __u8 reg, __u16 val16)
193 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
195 robo_reg(page, reg, REG_MII_ADDR_WRITE);
198 static void robo_write32(__u8 page, __u8 reg, __u32 val32)
201 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
202 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
204 robo_reg(page, reg, REG_MII_ADDR_WRITE);
207 /* checks that attached switch is 5325E/5350 */
208 static int robo_vlan5350()
210 /* set vlan access id to 15 and read it back */
212 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
214 /* 5365 will refuse this as it does not have this reg */
215 return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
220 static int robo_probe(char *devname)
222 struct ethtool_drvinfo info;
226 printk("Probing device %s: ", devname);
227 strcpy(ifr.ifr_name, devname);
229 if ((dev = dev_get_by_name(devname)) == NULL) {
230 printk("No such device\n");
234 info.cmd = ETHTOOL_GDRVINFO;
235 if (do_ioctl(SIOCETHTOOL, (void *) &info) < 0) {
236 printk("SIOCETHTOOL: not supported\n");
240 /* try access using MII ioctls - get phy address */
241 if (do_ioctl(SIOCGMIIPHY, NULL) < 0) {
244 /* got phy address check for robo address */
245 struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
246 if (mii->phy_id != ROBO_PHY_ADDR) {
247 printk("Invalid phy address (%d)\n", mii->phy_id);
252 phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
253 (mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
255 if (phyid == 0xffffffff || phyid == 0x55210022) {
256 printk("No Robo switch in managed mode found\n");
260 is_5350 = robo_vlan5350();
267 static int handle_vlan_port_read(void *driver, char *buf, int nr)
273 val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
277 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
279 val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
280 if ((val32 & (1 << 20)) /* valid */) {
281 for (j = 0; j < 6; j++) {
282 if (val32 & (1 << j)) {
283 len += sprintf(buf + len, "%d", j);
284 if (val32 & (1 << (j + 6))) {
285 if (j == 5) buf[len++] = 'u';
288 if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
294 len += sprintf(buf + len, "\n");
297 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
299 val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
300 if ((val16 & (1 << 14)) /* valid */) {
301 for (j = 0; j < 6; j++) {
302 if (val16 & (1 << j)) {
303 len += sprintf(buf + len, "%d", j);
304 if (val16 & (1 << (j + 7))) {
305 if (j == 5) buf[len++] = 'u';
308 if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
314 len += sprintf(buf + len, "\n");
323 static int handle_vlan_port_write(void *driver, char *buf, int nr)
325 switch_driver *d = (switch_driver *) driver;
326 switch_vlan_config *c = switch_parse_vlan(d, buf);
333 for (j = 0; j < d->ports; j++) {
334 if ((c->untag | c->pvid) & (1 << j))
335 /* change default vlan tag */
336 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
339 /* write config now */
340 val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
342 robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
343 (1 << 20) /* valid */ | (c->untag << 6) | c->port);
344 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
346 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
347 (1 << 14) /* valid */ | (c->untag << 7) | c->port);
348 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
354 #define set_switch(state) \
355 robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
357 static int handle_enable_read(void *driver, char *buf, int nr)
359 return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
362 static int handle_enable_write(void *driver, char *buf, int nr)
364 set_switch(buf[0] == '1');
369 static int handle_enable_vlan_read(void *driver, char *buf, int nr)
371 return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
374 static int handle_enable_vlan_write(void *driver, char *buf, int nr)
376 int disable = ((buf[0] != '1') ? 1 : 0);
378 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
379 (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
380 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
381 (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
382 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
383 (1 << 6) /* drop invalid VID frames */);
384 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
385 (1 << 3) /* drop miss V table frames */);
390 static int handle_reset(void *driver, char *buf, int nr)
392 switch_driver *d = (switch_driver *) driver;
393 switch_vlan_config *c = switch_parse_vlan(d, buf);
400 /* disable switching */
404 for (j = 0; j <= (is_5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) {
405 /* write config now */
406 val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
408 robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
410 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
411 robo_write16(ROBO_VLAN_PAGE, (is_5350 ? ROBO_VLAN_TABLE_ACCESS_5350 : ROBO_VLAN_TABLE_ACCESS), val16);
414 /* reset ports to a known good state */
415 for (j = 0; j < d->ports; j++) {
416 robo_write16(ROBO_CTRL_PAGE, port[j], 0x0000);
417 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
420 /* enable switching */
424 handle_enable_vlan_write(driver, "1", 0);
429 static int __init robo_init()
433 device = strdup("ethX");
434 for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
435 notfound = robo_probe(device);
443 switch_config cfg[] = {
444 {"enable", handle_enable_read, handle_enable_write},
445 {"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
446 {"reset", NULL, handle_reset},
449 switch_config vlan[] = {
450 {"ports", handle_vlan_port_read, handle_vlan_port_write},
453 switch_driver driver = {
455 version: DRIVER_VERSION,
460 driver_handlers: cfg,
465 return switch_register_driver(&driver);
469 static void __exit robo_exit()
471 switch_unregister_driver(DRIVER_NAME);
476 MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
477 MODULE_LICENSE("GPL");
479 module_init(robo_init);
480 module_exit(robo_exit);