package/kernel/mac80211/files/lib/wifi/mac80211.sh

   1 #!/bin/sh
   2 append DRIVERS "mac80211"
   3
   4 mac80211_hostapd_setup_base() {
   5         local phy="$1"
   6         local ifname="$2"
   7
   8         cfgfile="/var/run/hostapd-$phy.conf"
   9
  10         config_get device "$vif" device
  11         config_get country "$device" country
  12         config_get hwmode "$device" hwmode
  13         config_get channel "$device" channel
  14         config_get beacon_int "$device" beacon_int
  15         config_get basic_rate_list "$device" basic_rate
  16         config_get_bool noscan "$device" noscan
  17
  18         hostapd_set_log_options base_cfg "$device"
  19
  20         [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
  21
  22         hostapd_channel=$channel
  23         [ "$channel" = auto -o "$channel" = 0 ] && hostapd_channel=acs_survey
  24
  25         [ -n "$hwmode" ] && {
  26                 config_get hwmode_11n "$device" hwmode_11n
  27                 [ -n "$hwmode_11n" ] && {
  28                         hwmode="$hwmode_11n"
  29                         append base_cfg "ieee80211n=1" "$N"
  30                         config_get htmode "$device" htmode
  31                         config_get ht_capab_list "$device" ht_capab
  32                         case "$htmode" in
  33                                 HT20|HT40+|HT40-) ht_capab="[$htmode]";;
  34                                 *)ht_capab=;;
  35                         esac
  36                         for cap in $ht_capab_list; do
  37                                 ht_capab="$ht_capab[$cap]"
  38                         done
  39                         [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
  40                 }
  41         }
  42
  43         local country_ie=0
  44         [ -n "$country" ] && country_ie=1
  45         config_get_bool country_ie "$device" country_ie "$country_ie"
  46         [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  47
  48         local br brval brstr
  49         [ -n "$basic_rate_list" ] && {
  50                 for br in $basic_rate_list; do
  51                         brval="$(($br / 100))"
  52                         [ -n "$brstr" ] && brstr="$brstr "
  53                         brstr="$brstr$brval"
  54                 done
  55         }
  56
  57         cat >> "$cfgfile" <<EOF
  58 ctrl_interface=/var/run/hostapd-$phy
  59 driver=nl80211
  60 wmm_ac_bk_cwmin=4
  61 wmm_ac_bk_cwmax=10
  62 wmm_ac_bk_aifs=7
  63 wmm_ac_bk_txop_limit=0
  64 wmm_ac_bk_acm=0
  65 wmm_ac_be_aifs=3
  66 wmm_ac_be_cwmin=4
  67 wmm_ac_be_cwmax=10
  68 wmm_ac_be_txop_limit=0
  69 wmm_ac_be_acm=0
  70 wmm_ac_vi_aifs=2
  71 wmm_ac_vi_cwmin=3
  72 wmm_ac_vi_cwmax=4
  73 wmm_ac_vi_txop_limit=94
  74 wmm_ac_vi_acm=0
  75 wmm_ac_vo_aifs=2
  76 wmm_ac_vo_cwmin=2
  77 wmm_ac_vo_cwmax=3
  78 wmm_ac_vo_txop_limit=47
  79 wmm_ac_vo_acm=0
  80 tx_queue_data3_aifs=7
  81 tx_queue_data3_cwmin=15
  82 tx_queue_data3_cwmax=1023
  83 tx_queue_data3_burst=0
  84 tx_queue_data2_aifs=3
  85 tx_queue_data2_cwmin=15
  86 tx_queue_data2_cwmax=63
  87 tx_queue_data2_burst=0
  88 tx_queue_data1_aifs=1
  89 tx_queue_data1_cwmin=7
  90 tx_queue_data1_cwmax=15
  91 tx_queue_data1_burst=3.0
  92 tx_queue_data0_aifs=1
  93 tx_queue_data0_cwmin=3
  94 tx_queue_data0_cwmax=7
  95 tx_queue_data0_burst=1.5
  96 ${hwmode:+hw_mode=$hwmode}
  97 ${hostapd_channel:+channel=$hostapd_channel}
  98 ${beacon_int:+beacon_int=$beacon_int}
  99 ${country:+country_code=$country}
 100 ${noscan:+noscan=$noscan}
 101 ${brstr:+basic_rates=$brstr}
 102 $base_cfg
 103
 104 EOF
 105 }
 106
 107 mac80211_hostapd_setup_bss() {
 108         local phy="$1"
 109         local vif="$2"
 110         local staidx="$3"
 111
 112         hostapd_cfg=
 113         cfgfile="/var/run/hostapd-$phy.conf"
 114         config_get ifname "$vif" ifname
 115
 116         if [ -f "$cfgfile" ]; then
 117                 append hostapd_cfg "bss=$ifname" "$N"
 118         else
 119                 mac80211_hostapd_setup_base "$phy" "$ifname"
 120                 append hostapd_cfg "interface=$ifname" "$N"
 121         fi
 122
 123         local net_cfg bridge
 124         net_cfg="$(find_net_config "$vif")"
 125         [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
 126         config_set "$vif" bridge "$bridge"
 127
 128         hostapd_set_bss_options hostapd_cfg "$vif"
 129
 130         config_get_bool wds "$vif" wds 0
 131         [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
 132
 133         [ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"
 134
 135         local macaddr hidden maxassoc wmm
 136         config_get macaddr "$vif" macaddr
 137         config_get maxassoc "$vif" maxassoc
 138         config_get dtim_period "$vif" dtim_period
 139         config_get max_listen_int "$vif" max_listen_int
 140         config_get_bool hidden "$vif" hidden 0
 141         config_get_bool wmm "$vif" wmm 1
 142         cat >> /var/run/hostapd-$phy.conf <<EOF
 143 $hostapd_cfg
 144 wmm_enabled=$wmm
 145 bssid=$macaddr
 146 ignore_broadcast_ssid=$hidden
 147 ${dtim_period:+dtim_period=$dtim_period}
 148 ${max_listen_int:+max_listen_interval=$max_listen_int}
 149 ${maxassoc:+max_num_sta=$maxassoc}
 150 EOF
 151 }
 152
 153 mac80211_start_vif() {
 154         local vif="$1"
 155         local ifname="$2"
 156
 157         local net_cfg
 158         net_cfg="$(find_net_config "$vif")"
 159         [ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"
 160
 161         set_wifi_up "$vif" "$ifname"
 162 }
 163
 164 lookup_phy() {
 165         [ -n "$phy" ] && {
 166                 [ -d /sys/class/ieee80211/$phy ] && return
 167         }
 168
 169         local devpath
 170         config_get devpath "$device" path
 171         [ -n "$devpath" -a -d "/sys/devices/$devpath/ieee80211" ] && {
 172                 phy="$(ls /sys/devices/$devpath/ieee80211 | grep -m 1 phy)"
 173                 [ -n "$phy" ] && return
 174         }
 175
 176         local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
 177         [ -n "$macaddr" ] && {
 178                 for _phy in $(ls /sys/class/ieee80211 2>/dev/null); do
 179                         [ "$macaddr" = "$(cat /sys/class/ieee80211/${_phy}/macaddress)" ] || continue
 180                         phy="$_phy"
 181                         return
 182                 done
 183         }
 184         phy=
 185         return
 186 }
 187
 188 find_mac80211_phy() {
 189         local device="$1"
 190
 191         config_get phy "$device" phy
 192         lookup_phy
 193         [ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
 194                 echo "PHY for wifi device $1 not found"
 195                 return 1
 196         }
 197         config_set "$device" phy "$phy"
 198
 199         config_get macaddr "$device" macaddr
 200         [ -z "$macaddr" ] && {
 201                 config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
 202         }
 203
 204         return 0
 205 }
 206
 207 scan_mac80211() {
 208         local device="$1"
 209         local adhoc sta ap monitor mesh disabled
 210
 211         config_get vifs "$device" vifs
 212         for vif in $vifs; do
 213                 config_get_bool disabled "$vif" disabled 0
 214                 [ $disabled = 0 ] || continue
 215
 216                 config_get mode "$vif" mode
 217                 case "$mode" in
 218                         adhoc|sta|ap|monitor|mesh)
 219                                 append $mode "$vif"
 220                         ;;
 221                         *) echo "$device($vif): Invalid mode, ignored."; continue;;
 222                 esac
 223         done
 224
 225         config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
 226 }
 227
 228 list_phy_interfaces() {
 229         local phy="$1"
 230         if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
 231                 ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
 232         else
 233                 ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
 234         fi
 235 }
 236
 237 disable_mac80211() (
 238         local device="$1"
 239
 240         find_mac80211_phy "$device" || return 0
 241         config_get phy "$device" phy
 242
 243         set_wifi_down "$device"
 244         # kill all running hostapd and wpa_supplicant processes that
 245         # are running on atheros/mac80211 vifs
 246         for pid in `pidof hostapd`; do
 247                 grep -E "$phy" /proc/$pid/cmdline >/dev/null && \
 248                         kill $pid
 249         done
 250
 251         include /lib/network
 252         for wdev in $(list_phy_interfaces "$phy"); do
 253                 [ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
 254                 for pid in `pidof wpa_supplicant meshd-nl80211`; do
 255                         grep "$wdev" /proc/$pid/cmdline >/dev/null && \
 256                                 kill $pid
 257                 done
 258                 ifconfig "$wdev" down 2>/dev/null
 259                 unbridge "$dev"
 260                 iw dev "$wdev" del
 261         done
 262
 263         return 0
 264 )
 265
 266 get_freq() {
 267         local phy="$1"
 268         local chan="$2"
 269         iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
 270 }
 271
 272 mac80211_generate_mac() {
 273         local id="$1"
 274         local ref="$2"
 275         local mask="$3"
 276
 277         [ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
 278         local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
 279
 280         local mask1=$1
 281         local mask6=$6
 282
 283         local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
 284         [ "$((0x$mask1))" -gt 0 ] && {
 285                 b1="0x$1"
 286                 [ "$id" -gt 0 ] && \
 287                         b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
 288                 printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
 289                 return
 290         }
 291
 292         [ "$((0x$mask6))" -lt 255 ] && {
 293                 printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
 294                 return
 295         }
 296
 297         off2=$(( (0x$6 + $id) / 0x100 ))
 298         printf "%s:%s:%s:%s:%02x:%02x" \
 299                 $1 $2 $3 $4 \
 300                 $(( (0x$5 + $off2) % 0x100 )) \
 301                 $(( (0x$6 + $id) % 0x100 ))
 302 }
 303
 304 enable_mac80211() {
 305         local device="$1"
 306         config_get channel "$device" channel
 307         config_get vifs "$device" vifs
 308         config_get txpower "$device" txpower
 309         config_get country "$device" country
 310         config_get distance "$device" distance
 311         config_get txantenna "$device" txantenna all
 312         config_get rxantenna "$device" rxantenna all
 313         config_get antenna_gain "$device" antenna_gain 0
 314         config_get frag "$device" frag
 315         config_get rts "$device" rts
 316         find_mac80211_phy "$device" || return 0
 317         config_get phy "$device" phy
 318         local i=0
 319         local macidx=0
 320         local apidx=0
 321         local staidx=0
 322         fixed=""
 323         local hostapd_ctrl=""
 324
 325         [ -n "$country" ] && {
 326                 iw reg get | grep -q "^country $country:" || {
 327                         iw reg set "$country"
 328                         sleep 1
 329                 }
 330         }
 331
 332         config_get chanbw "$device" chanbw
 333         [ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath9k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw
 334         [ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath5k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode
 335
 336         [ "$channel" = "auto" -o "$channel" = "0" ] || {
 337                 fixed=1
 338         }
 339
 340         iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
 341         iw phy "$phy" set antenna_gain $antenna_gain
 342
 343         [ -n "$distance" ] && iw phy "$phy" set distance "$distance"
 344         [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
 345         [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
 346
 347         export channel fixed
 348         # convert channel to frequency
 349         local freq="$(get_freq "$phy" "${fixed:+$channel}")"
 350
 351         wifi_fixup_hwmode "$device" "g"
 352         for vif in $vifs; do
 353                 config_get ifname "$vif" ifname
 354                 [ -n "$ifname" ] || {
 355                         [ $i -gt 0 ] && ifname="wlan${phy#phy}-$i" || ifname="wlan${phy#phy}"
 356                 }
 357                 config_set "$vif" ifname "$ifname"
 358
 359                 config_get mode "$vif" mode
 360                 config_get ssid "$vif" ssid
 361
 362                 # It is far easier to delete and create the desired interface
 363                 case "$mode" in
 364                         adhoc)
 365                                 iw phy "$phy" interface add "$ifname" type adhoc
 366                         ;;
 367                         ap)
 368                                 # Hostapd will handle recreating the interface and
 369                                 # it's accompanying monitor
 370                                 apidx="$(($apidx + 1))"
 371                                 [ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
 372                         ;;
 373                         mesh)
 374                                 config_get key "$vif" key ""
 375                                 if [ -n "$key" ]; then
 376                                         iw phy "$phy" interface add "$ifname" type mp
 377                                 else
 378                                         config_get mesh_id "$vif" mesh_id
 379                                         iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
 380                                 fi
 381                         ;;
 382                         monitor)
 383                                 iw phy "$phy" interface add "$ifname" type monitor
 384                         ;;
 385                         sta)
 386                                 local wdsflag
 387                                 staidx="$(($staidx + 1))"
 388                                 config_get_bool wds "$vif" wds 0
 389                                 [ "$wds" -gt 0 ] && wdsflag="4addr on"
 390                                 iw phy "$phy" interface add "$ifname" type managed $wdsflag
 391                                 config_get_bool powersave "$vif" powersave 0
 392                                 [ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
 393                                 iw "$ifname" set power_save "$powersave"
 394                         ;;
 395                 esac
 396
 397                 # All interfaces must have unique mac addresses
 398                 # which can either be explicitly set in the device
 399                 # section, or automatically generated
 400                 config_get macaddr "$device" macaddr
 401                 config_get vif_mac "$vif" macaddr
 402                 [ -n "$vif_mac" ] || {
 403                         vif_mac="$(mac80211_generate_mac $macidx $macaddr $(cat /sys/class/ieee80211/${phy}/address_mask))"
 404                         macidx="$(($macidx + 1))"
 405                 }
 406                 [ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
 407                 config_set "$vif" macaddr "$vif_mac"
 408
 409                 # !! ap !!
 410                 #
 411                 # ALL ap functionality will be passed to hostapd
 412                 #
 413                 # !! station !!
 414                 #
 415                 # ALL station functionality will be passed to wpa_supplicant
 416                 #
 417                 if [ ! "$mode" = "ap" ]; then
 418                         # We attempt to set the channel for all interfaces, although
 419                         # mac80211 may not support it or the driver might not yet
 420                         # for ap mode this is handled by hostapd
 421                         config_get htmode "$device" htmode
 422                         case "$htmode" in
 423                                 HT20|HT40+|HT40-) ;;
 424                                 *) htmode= ;;
 425                         esac
 426                         [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel" $htmode
 427                 fi
 428
 429                 i=$(($i + 1))
 430         done
 431
 432         local start_hostapd=
 433         rm -f /var/run/hostapd-$phy.conf
 434         for vif in $vifs; do
 435                 config_get mode "$vif" mode
 436                 case "$mode" in
 437                         ap)
 438                                 mac80211_hostapd_setup_bss "$phy" "$vif" "$staidx"
 439                                 start_hostapd=1
 440                         ;;
 441                         mesh)
 442                                 config_get key "$vif" key ""
 443                                 [ -n "$key" ] && authsae_start_interface "$device" "$vif"
 444                         ;;
 445                 esac
 446         done
 447
 448         [ -n "$start_hostapd" ] && {
 449                 hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
 450                         echo "Failed to start hostapd for $phy"
 451                         return
 452                 }
 453                 sleep 2
 454
 455                 for vif in $vifs; do
 456                         config_get mode "$vif" mode
 457                         config_get ifname "$vif" ifname
 458                         [ "$mode" = "ap" ] || continue
 459                         hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
 460                         mac80211_start_vif "$vif" "$ifname"
 461                 done
 462         }
 463
 464         for vif in $vifs; do
 465                 config_get mode "$vif" mode
 466                 config_get ifname "$vif" ifname
 467                 [ "$mode" = "ap" ] || ifconfig "$ifname" up
 468
 469                 config_get vif_txpower "$vif" txpower
 470                 # use vif_txpower (from wifi-iface) to override txpower (from
 471                 # wifi-device) if the latter doesn't exist
 472                 txpower="${txpower:-$vif_txpower}"
 473                 [ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"
 474
 475                 case "$mode" in
 476                         adhoc)
 477                                 config_get bssid "$vif" bssid
 478                                 config_get ssid "$vif" ssid
 479                                 config_get beacon_int "$device" beacon_int
 480                                 config_get basic_rate_list "$device" basic_rate
 481                                 config_get encryption "$vif" encryption
 482                                 config_get key "$vif" key 1
 483                                 config_get mcast_rate "$vif" mcast_rate
 484                                 config_get htmode "$device" htmode
 485                                 case "$htmode" in
 486                                         HT20|HT40+|HT40-) ;;
 487                                         *) htmode= ;;
 488                                 esac
 489
 490
 491                                 local keyspec=""
 492                                 [ "$encryption" == "psk" -o "$encryption" == "psk2" ] && {
 493                                         if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
 494                                                 wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" $freq $htmode || {
 495                                                         echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
 496                                                         # make sure this wifi interface won't accidentally stay open without encryption
 497                                                         ifconfig "$ifname" down
 498                                                 }
 499                                                 mac80211_start_vif "$vif" "$ifname"
 500                                                 continue
 501                                         fi
 502                                 }
 503
 504                                 [ "$encryption" == "wep" ] && {
 505                                         case "$key" in
 506                                                 [1234])
 507                                                         local idx
 508                                                         for idx in 1 2 3 4; do
 509                                                                 local ikey
 510                                                                 config_get ikey "$vif" "key$idx"
 511
 512                                                                 [ -n "$ikey" ] && {
 513                                                                         ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
 514                                                                         [ $idx -eq $key ] && ikey="d:$ikey"
 515                                                                         append keyspec "$ikey"
 516                                                                 }
 517                                                         done
 518                                                 ;;
 519                                                 *) append keyspec "d:0:$(prepare_key_wep "$key")" ;;
 520                                         esac
 521                                 }
 522
 523                                 local br brval brsub brstr
 524                                 [ -n "$basic_rate_list" ] && {
 525                                         for br in $basic_rate_list; do
 526                                                 brval="$(($br / 1000))"
 527                                                 brsub="$((($br / 100) % 10))"
 528                                                 [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
 529                                                 [ -n "$brstr" ] && brstr="$brstr,"
 530                                                 brstr="$brstr$brval"
 531                                         done
 532                                 }
 533
 534                                 local mcval=""
 535                                 [ -n "$mcast_rate" ] && {
 536                                         mcval="$(($mcast_rate / 1000))"
 537                                         mcsub="$(( ($mcast_rate / 100) % 10 ))"
 538                                         [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
 539                                 }
 540
 541                                 iw dev "$ifname" ibss join "$ssid" $freq $htmode \
 542                                         ${fixed:+fixed-freq} $bssid \
 543                                         ${beacon_int:+beacon-interval $beacon_int} \
 544                                         ${brstr:+basic-rates $brstr} \
 545                                         ${mcval:+mcast-rate $mcval} \
 546                                         ${keyspec:+keys $keyspec}
 547                         ;;
 548                         mesh)
 549                                 mp_list="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
 550                                         mesh_max_retries mesh_ttl mesh_element_ttl mesh_auto_open_plinks mesh_hwmp_max_preq_retries
 551                                         mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
 552                                         mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
 553                                         mesh_hwmp_rann_interval mesh_gate_announcements mesh_fwding mesh_sync_offset_max_neighor
 554                                         mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
 555                                         mesh_hwmp_confirmation_interval mesh_power_mode mesh_awake_window"
 556                                 for mp in $mp_list
 557                                 do
 558                                         config_get mp_val "$vif" "$mp" ""
 559                                         [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$mp" "$mp_val"
 560                                 done
 561                         ;;
 562                         sta)
 563                                 if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
 564                                         wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
 565                                                 echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
 566                                                 # make sure this wifi interface won't accidentally stay open without encryption
 567                                                 ifconfig "$ifname" down
 568                                                 continue
 569                                         }
 570                                 fi
 571                         ;;
 572                 esac
 573                 [ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
 574         done
 575
 576 }
 577
 578
 579 check_mac80211_device() {
 580         config_get phy "$1" phy
 581         [ -z "$phy" ] && {
 582                 find_mac80211_phy "$1" >/dev/null || return 0
 583                 config_get phy "$1" phy
 584         }
 585         [ "$phy" = "$dev" ] && found=1
 586 }
 587
 588 detect_mac80211() {
 589         devidx=0
 590         config_load wireless
 591         while :; do
 592                 config_get type "radio$devidx" type
 593                 [ -n "$type" ] || break
 594                 devidx=$(($devidx + 1))
 595         done
 596         for dev in $(ls /sys/class/ieee80211); do
 597                 found=0
 598                 config_foreach check_mac80211_device wifi-device
 599                 [ "$found" -gt 0 ] && continue
 600
 601                 mode_11n=""
 602                 mode_band="g"
 603                 channel="11"
 604                 ht_cap=0
 605                 for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
 606                         ht_cap="$(($ht_cap | $cap))"
 607                 done
 608                 ht_capab="";
 609                 [ "$ht_cap" -gt 0 ] && {
 610                         mode_11n="n"
 611                         append ht_capab "       option htmode   HT20" "$N"
 612
 613                         list="  list ht_capab"
 614                         [ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list  LDPC" "$N"
 615                         [ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list        GF" "$N"
 616                         [ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list        SHORT-GI-20" "$N"
 617                         [ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list        SHORT-GI-40" "$N"
 618                         [ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list      TX-STBC" "$N"
 619                         [ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list      RX-STBC1" "$N"
 620                         [ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list      RX-STBC12" "$N"
 621                         [ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list      RX-STBC123" "$N"
 622                         [ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list    DSSS_CCK-40" "$N"
 623                 }
 624                 iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }
 625
 626                 if [ -x /usr/bin/readlink ]; then
 627                         path="$(readlink -f /sys/class/ieee80211/${dev}/device)"
 628                         path="${path##/sys/devices/}"
 629                         dev_id="        option path     '$path'"
 630                 else
 631                         dev_id="        option macaddr  $(cat /sys/class/ieee80211/${dev}/macaddress)"
 632                 fi
 633
 634                 cat <<EOF
 635 config wifi-device  radio$devidx
 636         option type     mac80211
 637         option channel  ${channel}
 638         option hwmode   11${mode_11n}${mode_band}
 639 $dev_id
 640 $ht_capab
 641         # REMOVE THIS LINE TO ENABLE WIFI:
 642         option disabled 1
 643
 644 config wifi-iface
 645         option device   radio$devidx
 646         option network  lan
 647         option mode     ap
 648         option ssid     OpenWrt
 649         option encryption none
 650
 651 EOF
 652         devidx=$(($devidx + 1))
 653         done
 654 }
 655