package/base-files/files/lib/network/config.sh

   1 #!/bin/sh
   2 # Copyright (C) 2006 OpenWrt.org
   3
   4 # DEBUG="echo"
   5
   6 find_config() {
   7         local iftype device iface ifaces ifn
   8         for ifn in $interfaces; do
   9                 config_get iftype "$ifn" type
  10                 config_get iface "$ifn" ifname
  11                 case "$iftype" in
  12                         bridge) config_get ifaces "$ifn" ifnames;;
  13                 esac
  14                 config_get device "$ifn" device
  15                 for ifc in $device $iface $ifaces; do
  16                         [ ."$ifc" = ."$1" ] && {
  17                                 echo "$ifn"
  18                                 return 0
  19                         }
  20                 done
  21         done
  22
  23         return 1;
  24 }
  25
  26 scan_interfaces() {
  27         local cfgfile="${1:-network}"
  28         interfaces=
  29         config_cb() {
  30                 case "$1" in
  31                         interface)
  32                                 config_set "$2" auto 1
  33                         ;;
  34                 esac
  35                 local iftype ifname device proto
  36                 config_get iftype "$CONFIG_SECTION" TYPE
  37                 case "$iftype" in
  38                         interface)
  39                                 append interfaces "$CONFIG_SECTION"
  40                                 config_get proto "$CONFIG_SECTION" proto
  41                                 config_get iftype "$CONFIG_SECTION" type
  42                                 config_get ifname "$CONFIG_SECTION" ifname
  43                                 config_get device "$CONFIG_SECTION" device "$ifname"
  44                                 config_set "$CONFIG_SECTION" device "$device"
  45                                 case "$iftype" in
  46                                         bridge)
  47                                                 config_set "$CONFIG_SECTION" ifnames "$device"
  48                                                 config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
  49                                         ;;
  50                                 esac
  51                                 ( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
  52                         ;;
  53                 esac
  54         }
  55         config_load "${cfgfile}"
  56 }
  57
  58 add_vlan() {
  59         local vif="${1%\.*}"
  60
  61         [ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
  62                 ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
  63                 $DEBUG vconfig add "$vif" "${1##*\.}"
  64                 return 0
  65         }
  66         return 1
  67 }
  68
  69 # sort the device list, drop duplicates
  70 sort_list() {
  71         local arg="$*"
  72         (
  73                 for item in $arg; do
  74                         echo "$item"
  75                 done
  76         ) | sort -u
  77 }
  78
  79 # Create the interface, if necessary.
  80 # Return status 0 indicates that the setup_interface() call should continue
  81 # Return status 1 means that everything is set up already.
  82
  83 prepare_interface() {
  84         local iface="$1"
  85         local config="$2"
  86         local vifmac="$3"
  87
  88         # if we're called for the bridge interface itself, don't bother trying
  89         # to create any interfaces here. The scripts have already done that, otherwise
  90         # the bridge interface wouldn't exist.
  91         [ "br-$config" = "$iface" -o -e "$iface" ] && return 0;
  92
  93         ifconfig "$iface" 2>/dev/null >/dev/null && {
  94                 local proto
  95                 config_get proto "$config" proto
  96
  97                 # make sure the interface is removed from any existing bridge and deconfigured,
  98                 # (deconfigured only if the interface is not set to proto=none)
  99                 unbridge "$iface"
 100                 [ "$proto" = none ] || ifconfig "$iface" 0.0.0.0
 101
 102                 # Change interface MAC address if requested
 103                 [ -n "$vifmac" ] && {
 104                         ifconfig "$iface" down
 105                         ifconfig "$iface" hw ether "$vifmac" up
 106                 }
 107         }
 108
 109         # Setup VLAN interfaces
 110         add_vlan "$iface" && return 1
 111         ifconfig "$iface" 2>/dev/null >/dev/null || return 0
 112
 113         # Setup bridging
 114         local iftype
 115         config_get iftype "$config" type
 116         case "$iftype" in
 117                 bridge)
 118                         [ -x /usr/sbin/brctl ] && {
 119                                 ifconfig "br-$config" 2>/dev/null >/dev/null && {
 120                                         local newdevs devices
 121                                         config_get devices "$config" device
 122                                         for dev in $(sort_list "$devices" "$iface"); do
 123                                                 append newdevs "$dev"
 124                                         done
 125                                         uci_set_state network "$config" device "$newdevs"
 126                                         $DEBUG ifconfig "$iface" 0.0.0.0
 127                                         $DEBUG brctl addif "br-$config" "$iface"
 128                                         # Bridge existed already. No further processing necesary
 129                                 } || {
 130                                         local stp
 131                                         config_get_bool stp "$config" stp 0
 132                                         $DEBUG brctl addbr "br-$config"
 133                                         $DEBUG brctl setfd "br-$config" 0
 134                                         $DEBUG ifconfig "br-$config" up
 135                                         $DEBUG ifconfig "$iface" 0.0.0.0
 136                                         $DEBUG brctl addif "br-$config" "$iface"
 137                                         $DEBUG brctl stp "br-$config" $stp
 138                                         # Creating the bridge here will have triggered a hotplug event, which will
 139                                         # result in another setup_interface() call, so we simply stop processing
 140                                         # the current event at this point.
 141                                 }
 142                                 ifconfig "$iface" up 2>/dev/null >/dev/null
 143                                 return 1
 144                         }
 145                 ;;
 146         esac
 147         return 0
 148 }
 149
 150 set_interface_ifname() {
 151         local config="$1"
 152         local ifname="$2"
 153
 154         local device
 155         config_get device "$1" device
 156         uci_set_state network "$config" ifname "$ifname"
 157         uci_set_state network "$config" device "$device"
 158 }
 159
 160 setup_interface_none() {
 161         env -i ACTION="ifup" INTERFACE="$2" DEVICE="$1" PROTO=none /sbin/hotplug-call "iface" &
 162 }
 163
 164 setup_interface_static() {
 165         local iface="$1"
 166         local config="$2"
 167
 168         local ipaddr netmask ip6addr
 169         config_get ipaddr "$config" ipaddr
 170         config_get netmask "$config" netmask
 171         config_get ip6addr "$config" ip6addr
 172         [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
 173
 174         local gateway ip6gw dns bcast
 175         config_get gateway "$config" gateway
 176         config_get ip6gw "$config" ip6gw
 177         config_get dns "$config" dns
 178         config_get bcast "$config" broadcast
 179
 180         [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
 181         [ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
 182         [ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
 183         [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
 184         [ -z "$dns" ] || {
 185                 for ns in $dns; do
 186                         grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
 187                                 echo "nameserver $ns" >> /tmp/resolv.conf.auto
 188                         }
 189                 done
 190         }
 191
 192         config_get type "$config" TYPE
 193         [ "$type" = "alias" ] && return 0
 194
 195         env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
 196 }
 197
 198 setup_interface_alias() {
 199         local config="$1"
 200         local parent="$2"
 201         local iface="$3"
 202
 203         local cfg
 204         config_get cfg "$config" interface
 205         [ "$parent" == "$cfg" ] || return 0
 206
 207         # alias counter
 208         local ctr
 209         config_get ctr "$parent" alias_count 0
 210         ctr="$(($ctr + 1))"
 211         config_set "$parent" alias_count "$ctr"
 212
 213         # alias list
 214         local list
 215         config_get list "$parent" aliases
 216         append list "$config"
 217         config_set "$parent" aliases "$list"
 218
 219         iface="$iface:$ctr"
 220         set_interface_ifname "$config" "$iface"
 221
 222         local proto
 223         config_get proto "$config" proto "static"
 224         case "${proto}" in
 225                 static)
 226                         setup_interface_static "$iface" "$config"
 227                 ;;
 228                 *)
 229                         echo "Unsupported type '$proto' for alias config '$config'"
 230                         return 1
 231                 ;;
 232         esac
 233 }
 234
 235 setup_interface() {
 236         local iface_main="$1"
 237         local config="$2"
 238         local proto="$3"
 239         local vifmac="$4"
 240         local ip6addr_main=
 241
 242         [ -n "$config" ] || {
 243                 config=$(find_config "$iface_main")
 244                 [ "$?" = 0 ] || return 1
 245         }
 246
 247         prepare_interface "$iface_main" "$config" "$vifmac" || return 0
 248
 249         [ "$iface_main" = "br-$config" ] && {
 250                 # need to bring up the bridge and wait a second for
 251                 # it to switch to the 'forwarding' state, otherwise
 252                 # it will lose its routes...
 253                 ifconfig "$iface_main" up
 254                 sleep 1
 255         }
 256
 257         # Interface settings
 258         grep "$iface_main:" /proc/net/dev > /dev/null && {
 259                 local mtu macaddr
 260                 config_get mtu "$config" mtu
 261                 config_get macaddr "$config" macaddr
 262                 [ -n "$macaddr" ] && $DEBUG ifconfig "$iface_main" down
 263                 $DEBUG ifconfig "$iface_main" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
 264         }
 265         set_interface_ifname "$config" "$iface_main"
 266
 267         pidfile="/var/run/$iface_main.pid"
 268         [ -n "$proto" ] || config_get proto "$config" proto
 269         case "$proto" in
 270                 static)
 271                         config_get ip6addr_main "$config" ip6addr
 272                         setup_interface_static "$iface_main" "$config"
 273                 ;;
 274                 dhcp)
 275                         # prevent udhcpc from starting more than once
 276                         lock "/var/lock/dhcp-$iface_main"
 277                         local pid="$(cat "$pidfile" 2>/dev/null)"
 278                         if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
 279                                 lock -u "/var/lock/dhcp-$iface_main"
 280                         else
 281                                 local ipaddr netmask hostname proto1 clientid
 282                                 config_get ipaddr "$config" ipaddr
 283                                 config_get netmask "$config" netmask
 284                                 config_get hostname "$config" hostname
 285                                 config_get proto1 "$config" proto
 286                                 config_get clientid "$config" clientid
 287
 288                                 [ -z "$ipaddr" ] || \
 289                                         $DEBUG ifconfig "$iface_main" "$ipaddr" ${netmask:+netmask "$netmask"}
 290
 291                                 # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
 292                                 local dhcpopts
 293                                 [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
 294                                 $DEBUG eval udhcpc -t 0 -i "$iface_main" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -O rootpath -R &}
 295                                 lock -u "/var/lock/dhcp-$iface_main"
 296                         fi
 297                 ;;
 298                 none)
 299                         setup_interface_none "$iface_main" "$config"
 300                 ;;
 301                 *)
 302                         if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
 303                                 eval "setup_interface_$proto '$iface_main' '$config' '$proto'"
 304                         else
 305                                 echo "Interface type $proto not supported."
 306                                 return 1
 307                         fi
 308                 ;;
 309         esac
 310         [ "$proto" = none ] || {
 311                 for ifn in `ifconfig | grep "^$iface_main:" | awk '{print $1}'`; do
 312                         ifconfig "$ifn" down
 313                 done
 314         }
 315
 316         local aliases
 317         config_set "$config" aliases ""
 318         config_set "$config" alias_count 0
 319         config_foreach setup_interface_alias alias "$config" "$iface_main"
 320         config_get aliases "$config" aliases
 321         [ -z "$aliases" ] || uci_set_state network "$config" aliases "$aliases"
 322
 323         # put the ip6addr back to the beginning to become the main ip again
 324         [ -z "$ip6addr_main" ] || {
 325                 $DEBUG ifconfig "$iface_main" del "$ip6addr_main"
 326                 $DEBUG ifconfig "$iface_main" add "$ip6addr_main"
 327         }
 328 }
 329
 330 unbridge() {
 331         local dev="$1"
 332         local brdev
 333
 334         [ -x /usr/sbin/brctl ] || return 0
 335         brctl show | grep "$dev" >/dev/null && {
 336                 # interface is still part of a bridge, correct that
 337
 338                 for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
 339                         brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
 340                 done
 341         }
 342 }