1 # 6to4.sh - IPv6-in-IPv4 tunnel backend
2 # Copyright (c) 2010 OpenWrt.org
5 local if=$(ip -4 r l e 0.0.0.0/0); if="${if#default* dev }"; if="${if%% *}"
6 [ -n "$if" ] && grep -qs "^ *$if:" /proc/net/dev && echo "$if"
10 local ip=$(ip -4 a s dev "$1"); ip="${ip#*inet }"
11 echo "${ip%%[^0-9.]*}"
16 local oIFS="$IFS"; IFS="."; set -- $ip4; IFS="$oIFS"
18 printf "2002:%02x%02x:%02x%02x\n" $1 $2 $3 $4
21 set_6to4_radvd_interface() {
23 local lanif="${2:-lan}"
29 config_get net "$cfg" interface
31 [ "$net" = "$lanif" ] && {
37 config_foreach find_ifsection interface
39 [ -z "$ifsection" ] && {
40 ifsection="iface_$sid"
41 uci_set_state radvd "$ifsection" "" interface
42 uci_set_state radvd "$ifsection" interface "$lanif"
45 uci_set_state radvd "$ifsection" ignore 0
46 uci_set_state radvd "$ifsection" IgnoreIfMissing 1
47 uci_set_state radvd "$ifsection" AdvSendAdvert 1
48 uci_set_state radvd "$ifsection" MaxRtrAdvInterval 30
51 set_6to4_radvd_prefix() {
53 local lanif="${2:-lan}"
54 local wanif="${3:-wan}"
55 local prefix="${4:-0:0:0:1::/64}"
61 config_get net "$cfg" interface
62 config_get base "$cfg" Base6to4Interface
64 [ "$net" = "$lanif" ] && [ "$base" = "$wanif" ] && {
70 config_foreach find_pfxsection prefix
72 [ -z "$pfxsection" ] && {
73 pfxsection="prefix_${sid}_${lanif}"
74 uci_set_state radvd "$pfxsection" "" prefix
75 uci_set_state radvd "$pfxsection" ignore 0
76 uci_set_state radvd "$pfxsection" interface "$lanif"
77 uci_set_state radvd "$pfxsection" prefix "$prefix"
78 uci_set_state radvd "$pfxsection" AdvOnLink 1
79 uci_set_state radvd "$pfxsection" AdvAutonomous 1
80 uci_set_state radvd "$pfxsection" AdvValidLifetime 300
81 uci_set_state radvd "$pfxsection" AdvPreferredLifetime 120
82 uci_set_state radvd "$pfxsection" Base6to4Interface "$wanif"
87 # Hook into scan_interfaces() to synthesize a .device option
88 # This is needed for /sbin/ifup to properly dispatch control
89 # to setup_interface_6to4() even if no .ifname is set in
92 config_set "$1" device "6to4-$1"
95 coldplug_interface_6to4() {
96 setup_interface_6to4 "6to4-$1" "$1"
99 setup_interface_6to4() {
102 local link="6to4-$cfg"
104 local local4=$(uci_get network "$cfg" ipaddr)
107 config_get mtu "$cfg" mtu
110 config_get ttl "$cfg" ttl
113 config_get metric "$cfg" metric
116 config_get_bool defaultroute "$cfg" defaultroute 1
118 local wanif=$(find_6to4_wanif)
120 logger -t "$link" "Cannot find wan interface - aborting"
124 local wancfg=$(find_config "$wanif")
125 [ -z "$wancfg" ] && {
126 logger -t "$link" "Cannot find wan network - aborting"
130 # If local4 is unset, guess local IPv4 address from the
131 # interface used by the default route.
132 [ -z "$local4" ] && {
134 local4=$(find_6to4_wanip "$wanif")
135 uci_set_state network "$cfg" wan_device "$wanif"
139 [ -n "$local4" ] && {
140 logger -t "$link" "Starting ..."
142 # creating the tunnel below will trigger a net subsystem event
143 # prevent it from touching or iface by disabling .auto here
144 uci_set_state network "$cfg" ifname $link
145 uci_set_state network "$cfg" auto 0
147 # find our local prefix
148 local prefix6=$(find_6to4_prefix "$local4")
149 local local6="$prefix6::1/16"
151 logger -t "$link" " * IPv4 address is $local4"
152 logger -t "$link" " * IPv6 address is $local6"
153 ip tunnel add $link mode sit remote any local $local4 ttl ${ttl:-64}
155 ip link set mtu ${mtu:-1280} dev $link
156 ip addr add $local6 dev $link
158 uci_set_state network "$cfg" ipaddr $local4
159 uci_set_state network "$cfg" ip6addr $local6
161 [ "$defaultroute" = 1 ] && {
162 logger -t "$link" " * Adding default route"
163 ip -6 route add ::/0 via ::192.88.99.1 metric ${metric:-1} dev $link
164 uci_set_state network "$cfg" defaultroute 1
167 [ -f /etc/config/radvd ] && /etc/init.d/radvd enabled && {
168 local sid="6to4_$cfg"
170 uci_revert_state radvd
173 # find delegation target
175 config_get adv_interface "$cfg" adv_interface
177 local adv_subnet=$(uci_get network "$cfg" adv_subnet)
178 adv_subnet=$((0x${adv_subnet:-1}))
182 for adv_interface in ${adv_interface:-lan}; do
184 config_get adv_ifname "${adv_interface:-lan}" ifname
186 grep -qs "^ *$adv_ifname:" /proc/net/dev && {
187 local subnet6="$(printf "%s:%x::1/64" "$prefix6" $adv_subnet)"
189 logger -t "$link" " * Advertising IPv6 subnet $subnet6 on ${adv_interface:-lan} ($adv_ifname)"
190 ip -6 addr add $subnet6 dev $adv_ifname
192 set_6to4_radvd_interface "$sid" "$adv_interface"
193 set_6to4_radvd_prefix "$sid" "$adv_interface" \
194 "$wancfg" "$(printf "0:0:0:%x::/64" $adv_subnet)"
196 adv_subnets="${adv_subnets:+$adv_subnets }$adv_ifname:$subnet6"
197 adv_subnet=$(($adv_subnet + 1))
201 uci_set_state network "$cfg" adv_subnets "$adv_subnets"
203 /etc/init.d/radvd restart
206 logger -t "$link" "... started"
208 env -i ACTION="ifup" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
210 echo "Cannot determine local IPv4 address for 6to4 tunnel $cfg - skipping"
214 stop_interface_6to4() {
216 local link="6to4-$cfg"
218 local local6=$(uci_get_state network "$cfg" ip6addr)
219 local defaultroute=$(uci_get_state network "$cfg" defaultroute)
221 local adv_subnets=$(uci_get_state network "$cfg" adv_subnets)
223 grep -qs "^ *$link:" /proc/net/dev && {
224 logger -t "$link" "Shutting down ..."
225 env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
227 [ -n "$adv_subnets" ] && {
228 uci_revert_state radvd
229 /etc/init.d/radvd enabled && /etc/init.d/radvd restart
232 for adv_subnet in $adv_subnets; do
233 local ifname="${adv_subnet%%:*}"
234 local subnet="${adv_subnet#*:}"
236 logger -t "$link" " * Removing IPv6 subnet $subnet from interface $ifname"
237 ip -6 addr del $subnet dev $ifname
241 [ "$defaultroute" = "1" ] && {
242 ip -6 route del ::/0 via ::192.88.99.1 dev $link metric 1
245 ip addr del $local6 dev $link
246 ip link set $link down
249 logger -t "$link" "... stopped"