msgid "Enabled"
msgstr "有効"
+msgid "Enter value in hex, starting with <code>0x</code>"
+msgstr "<code>0x</code> で始まる16進数の値を入力してください。"
+
msgid "Error collecting troubleshooting information"
msgstr "トラブルシューティング情報の収集エラー"
msgstr "エラー"
msgid "Expect interface state on up event"
-msgstr ""
+msgstr "Up イベント時に予想されるインターフェースの状態です。"
msgid "Failure interval"
msgstr "障害検出 インターバル"
+msgid "Firewall mask"
+msgstr "ファイアウォール マスク"
+
msgid "Flush conntrack table"
msgstr ""
msgstr ""
msgid "Globals"
-msgstr ""
+msgstr "全般"
msgid "Globals mwan3 options"
-msgstr ""
+msgstr "MWAN3 全般オプション"
msgid "Hotplug Script"
msgstr "ホットプラグ スクリプト"
msgstr "IPv6"
msgid "Initial state"
-msgstr ""
+msgstr "初期状態"
msgid "Interface"
msgstr "インターフェース"
msgstr "オフライン"
msgid "Online"
-msgstr ""
+msgstr "オンライン"
msgid "Online (tracking active)"
msgstr "オンライン（追跡実行中）"
msgstr "Ping インターバル"
msgid "Ping interval during failure detection"
-msgstr "障害検出動作中の Ping 実行間隔です。"
+msgstr "障害検出中の Ping 実行間隔です。"
msgid "Ping interval during failure recovering"
msgstr "障害復旧中の Ping 実行間隔です。"
msgid "Restart MWAN"
msgstr "MWAN の再起動"
-msgid "Restore default hotplug script"
-msgstr "デフォルトのホットプラグ スクリプトの復元"
-
-msgid "Restore..."
-msgstr "復元..."
-
msgid "Rule"
msgstr "ルール"
"に対して Ping の送信が行われます。常にオンラインとする場合、空欄のままにしま"
"す。"
+msgid ""
+"This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+">The file is also preserved during sysupgrade.<br /><br />Notes:<br />This "
+"file is interpreted as a shell script.<br />The first line of the script "
+"must be "#!/bin/sh" without quotes.<br />Lines beginning with # are "
+"comments and are not executed.<br />Put your custom mwan3 action here, they "
+"will<br />be executed with each netifd hotplug interface event<br />on "
+"interfaces for which mwan3 is enabled.<br /><br />There are three main "
+"environment variables that are passed to this script.<br /><br />$ACTION "
+"Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
+"went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
+"which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
+msgstr ""
+"このセクションでは、 \"/etc/mwan3.user\" の内容を変更することができます。"
+"<br />このファイルは、 sysupgrade 時に保持されます。<br /><br />注意: <br />"
+"このファイルは、シェルスクリプトとして解釈されます。<br />スクリプトの1行目"
+"は、"#!bin/sh" である必要があります（クォーテーション不要）。<br /># "
+"で始まる行はコメントであり、実行されません。<br />mwan3 のカスタム動作をここ"
+"に入力してください。これらは、 mwan3 が有効なインターフェースの<br />netifd "
+"ホットプラグ インターフェース イベント毎に実行されます。<br /><br />主に3つの"
+"環境変数が利用可能です。<br /><br />$ACTION - \"ifup\" および \"ifdown\"<br /"
+">$INTERFACE - Up または Down が行われたインターフェース名（例: \"wan\" や "
+"\"wwan\"）<br />$DEVICE - Up または Down が行われた物理デバイス名（例: "
+"\"eth0\" や \"wwan0\"）<br /><br />"
+
msgid "This section allows you to modify the contents of /etc/config/mwan3"
msgstr ""
"このセクションでは、 /etc/config/mwan3 の内容を変更することができます。"
msgstr ""
"このセクションでは、 /etc/config/wireless の内容を変更することができます。"
-msgid ""
-"This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
-"mwancustom<br />This is useful for running system commands and/or scripts "
-"based on interface ifup or ifdown hotplug events<br /><br />Notes:<br />The "
-"first line of the script must be "#!/bin/sh" without quotes<br /"
-">Lines beginning with # are comments and are not executed<br /><br /"
-">Available variables:<br />$ACTION is the hotplug event (ifup, ifdown)<br />"
-"$INTERFACE is the interface name (wan1, wan2, etc.)<br />$DEVICE is the "
-"device name attached to the interface (eth0.1, eth1, etc.)"
-msgstr ""
-"このセクションでは、 /etc/hotplug.d/iface/16-mwancustom の内容を変更すること"
-"ができます。<br />これは、インターフェースの ifup または ifdown ホットプラグ "
-"イベント時にシステムコマンドまたはスクリプト、もしくはその両方を実行すること"
-"に役立ちます。<br /><br />注意:<br />スクリプトの1行目は、"#!bin/sh" "
-"である必要があります（クオーテーション不要）。<br /># で始まる行はコメントと"
-"して認識され、実行されません。<br /><br />利用可能な変数:<br />$ACTION - ホッ"
-"トプラグ イベント (ifup, ifdown)<br />$INTERFACE - インターフェース名（wan1, "
-"wan2, その他）<br />$DEVICE - インターフェースにアタッチされたデバイスの名前"
-"（eth0.1, eth1, その他）"
-
msgid "Tracking IP"
msgstr "追跡 IP"
msgid "Tracking hostname or IP address"
msgstr "追跡ホスト名または IP アドレス"
+msgid "Tracking method"
+msgstr "追跡方式"
+
msgid "Tracking reliability"
msgstr "追跡の信頼性"
"Use the IP address of this interface as source IP address for traffic "
"initiated by the router itself"
msgstr ""
+"ルーター自身によって発生するトラフィックのアクセス元 IP アドレスとして、この"
+"インターフェースの IP アドレスが使用されます。"
msgid "View the contents of /etc/protocols for protocol descriptions"
msgstr "プロトコルの説明については、 /etc/protocols の内容を確認してください。"
msgid "unreachable (reject)"
msgstr "unreachable (reject)"
-
-#~ msgid ""
-#~ "This IP address will be pinged to dermine if the link is up or down. "
-#~ "Leave blank to assume interface is always online"
-#~ msgstr ""
-#~ "これらは、リンクの Up または Down を判定するために Ping が送信されるIP ア"
-#~ "ドレスです。常にオンラインとする場合、空欄のままにします。"
msgid "Enabled"
msgstr ""
+msgid "Enter value in hex, starting with <code>0x</code>"
+msgstr ""
+
msgid "Error collecting troubleshooting information"
msgstr ""
msgid "Failure interval"
msgstr ""
+msgid "Firewall mask"
+msgstr ""
+
msgid "Flush conntrack table"
msgstr ""
msgid "Restart MWAN"
msgstr ""
-msgid "Restore default hotplug script"
-msgstr ""
-
-msgid "Restore..."
-msgstr ""
-
msgid "Rule"
msgstr ""
"down. Leave blank to assume interface is always online"
msgstr ""
+msgid ""
+"This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+">The file is also preserved during sysupgrade.<br /><br />Notes:<br />This "
+"file is interpreted as a shell script.<br />The first line of the script "
+"must be "#!/bin/sh" without quotes.<br />Lines beginning with # are "
+"comments and are not executed.<br />Put your custom mwan3 action here, they "
+"will<br />be executed with each netifd hotplug interface event<br />on "
+"interfaces for which mwan3 is enabled.<br /><br />There are three main "
+"environment variables that are passed to this script.<br /><br />$ACTION "
+"Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
+"went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
+"which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
+msgstr ""
+
msgid "This section allows you to modify the contents of /etc/config/mwan3"
msgstr ""
msgid "This section allows you to modify the contents of /etc/config/wireless"
msgstr ""
-msgid ""
-"This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
-"mwancustom<br />This is useful for running system commands and/or scripts "
-"based on interface ifup or ifdown hotplug events<br /><br />Notes:<br />The "
-"first line of the script must be "#!/bin/sh" without quotes<br /"
-">Lines beginning with # are comments and are not executed<br /><br /"
-">Available variables:<br />$ACTION is the hotplug event (ifup, ifdown)<br />"
-"$INTERFACE is the interface name (wan1, wan2, etc.)<br />$DEVICE is the "
-"device name attached to the interface (eth0.1, eth1, etc.)"
-msgstr ""
-
msgid "Tracking IP"
msgstr ""
msgid "Enabled"
msgstr "启用"
+msgid "Enter value in hex, starting with <code>0x</code>"
+msgstr ""
+
msgid "Error collecting troubleshooting information"
msgstr "收集故障排除信息时出错"
msgid "Failure interval"
msgstr "故障检测间隔"
+msgid "Firewall mask"
+msgstr ""
+
msgid "Flush conntrack table"
msgstr "刷新连接跟踪表"
msgid "Restart MWAN"
msgstr "重启 MWAN"
-msgid "Restore default hotplug script"
-msgstr "恢复默认的 hotplug 脚本"
-
-msgid "Restore..."
-msgstr "恢复..."
-
msgid "Rule"
msgstr "规则"
"down. Leave blank to assume interface is always online"
msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线"
+msgid ""
+"This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+">The file is also preserved during sysupgrade.<br /><br />Notes:<br />This "
+"file is interpreted as a shell script.<br />The first line of the script "
+"must be "#!/bin/sh" without quotes.<br />Lines beginning with # are "
+"comments and are not executed.<br />Put your custom mwan3 action here, they "
+"will<br />be executed with each netifd hotplug interface event<br />on "
+"interfaces for which mwan3 is enabled.<br /><br />There are three main "
+"environment variables that are passed to this script.<br /><br />$ACTION "
+"Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
+"went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
+"which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
+msgstr ""
+
msgid "This section allows you to modify the contents of /etc/config/mwan3"
msgstr "这里允许你修改 /etc/config/mwan3 的内容"
msgid "This section allows you to modify the contents of /etc/config/wireless"
msgstr "这里允许你修改 /etc/config/wireless 的内容"
-msgid ""
-"This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
-"mwancustom<br />This is useful for running system commands and/or scripts "
-"based on interface ifup or ifdown hotplug events<br /><br />Notes:<br />The "
-"first line of the script must be "#!/bin/sh" without quotes<br /"
-">Lines beginning with # are comments and are not executed<br /><br /"
-">Available variables:<br />$ACTION is the hotplug event (ifup, ifdown)<br />"
-"$INTERFACE is the interface name (wan1, wan2, etc.)<br />$DEVICE is the "
-"device name attached to the interface (eth0.1, eth1, etc.)"
-msgstr ""
-"这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容<br />这可以在接口 "
-"ifup 或 ifdown Hotplug 事件时运行系统命令或脚本<br /><br />注意:<br />脚本的"
-"第一行必须是 "#!/bin/sh" 不含引号<br />以＃开头的行是注释，不会执行"
-"<br /><br />可用变量:<br />$ACTION 是 Hotplug 事件（ifup, ifdown）<br />"
-"$INTERFACE 是接口名称（wan1、wan2 等）<br />$DEVICE 是连接到接口的设备名称 "
-"（eth0.1、eth1 等）"
-
msgid "Tracking IP"
msgstr "追踪的 IP"
msgid "Tracking hostname or IP address"
msgstr "追踪的主机或 IP 地址"
+msgid "Tracking method"
+msgstr ""
+
msgid "Tracking reliability"
msgstr "追踪可靠性"
msgid "unreachable (reject)"
msgstr "不可达（拒绝）"
+
+#~ msgid "Restore default hotplug script"
+#~ msgstr "恢复默认的 hotplug 脚本"
+
+#~ msgid "Restore..."
+#~ msgstr "恢复..."
+
+#~ msgid ""
+#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
+#~ "mwancustom<br />This is useful for running system commands and/or scripts "
+#~ "based on interface ifup or ifdown hotplug events<br /><br />Notes:<br /"
+#~ ">The first line of the script must be "#!/bin/sh" without "
+#~ "quotes<br />Lines beginning with # are comments and are not executed<br /"
+#~ "><br />Available variables:<br />$ACTION is the hotplug event (ifup, "
+#~ "ifdown)<br />$INTERFACE is the interface name (wan1, wan2, etc.)<br />"
+#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)"
+#~ msgstr ""
+#~ "这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容<br />这可以在接"
+#~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本<br /><br />注意:<br />"
+#~ "脚本的第一行必须是 "#!/bin/sh" 不含引号<br />以＃开头的行是注释，"
+#~ "不会执行<br /><br />可用变量:<br />$ACTION 是 Hotplug 事件（ifup, ifdown）"
+#~ "<br />$INTERFACE 是接口名称（wan1、wan2 等）<br />$DEVICE 是连接到接口的设"
+#~ "备名称 （eth0.1、eth1 等）"
projects / project / luci.git / commitdiff