* add an option for the captive portal detection
* support the new signal quality treshold (default 30)
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
local logfile
if nixio.fs.access("/var/log/messages") then
local logfile
if nixio.fs.access("/var/log/messages") then
- logfile = util.trim(util.exec("cat /var/log/messages | grep 'travelmate-'"))
+ logfile = util.trim(util.exec("grep -F 'travelmate-' /var/log/messages"))
else
logfile = util.trim(util.exec("logread -e 'travelmate-'"))
end
else
logfile = util.trim(util.exec("logread -e 'travelmate-'"))
end
o2.default = o2.enabled
o2.rmempty = false
o2.default = o2.enabled
o2.rmempty = false
-o3 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
+o3 = s:option(Flag, "trm_captive", translate("Captive Portal Detection"),
+ translate("Check the internet availability, log captive portal redirections and keep the uplink connection 'alive'."))
+o3.default = o3.enabled
+o3.rmempty = false
+
+o4 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
translate("Name of the used uplink interface."))
if dump then
local i, v
for i, v in ipairs(dump.interface) do
if v.interface ~= "loopback" and v.interface ~= "lan" then
translate("Name of the used uplink interface."))
if dump then
local i, v
for i, v in ipairs(dump.interface) do
if v.interface ~= "loopback" and v.interface ~= "lan" then
-o3.default = trmiface
-o3.rmempty = false
+o4.default = trmiface
+o4.rmempty = false
-o4 = s:option(Value, "trm_triggerdelay", translate("Trigger delay"),
+o5 = s:option(Value, "trm_triggerdelay", translate("Trigger Delay"),
translate("Additional trigger delay in seconds before travelmate processing begins."))
translate("Additional trigger delay in seconds before travelmate processing begins."))
-o4.default = 2
-o4.datatype = "range(1,90)"
-o4.rmempty = false
+o5.datatype = "range(1,60)"
+o5.default = 2
+o5.rmempty = false
btn = s:option(Button, "", translate("Manual Rescan"),
translate("Force a manual uplink rescan / reconnect in 'trigger' mode."))
btn = s:option(Button, "", translate("Manual Rescan"),
translate("Force a manual uplink rescan / reconnect in 'trigger' mode."))
ds = m:section(NamedSection, "global", "travelmate", translate("Runtime Information"))
ds = m:section(NamedSection, "global", "travelmate", translate("Runtime Information"))
-dv1 = ds:option(DummyValue, "status", translate("Travelmate Status"))
+dv1 = ds:option(DummyValue, "status", translate("Travelmate Status (Quality)"))
dv1.template = "travelmate/runtime"
dv1.template = "travelmate/runtime"
+if parse ~= nil then
+ dv1.value = parse.data.travelmate_status or translate("n/a")
+else
dv1.value = translate("n/a")
dv1.value = translate("n/a")
-elseif parse.data.travelmate_status == "connected" then
- dv1.value = translate("connected")
-elseif parse.data.travelmate_status == "not connected" then
- dv1.value = translate("not connected")
-elseif parse.data.travelmate_status == "running" then
- dv1.value = translate("running")
-elseif parse.data.travelmate_status == "error" then
- dv1.value = translate("error")
end
dv2 = ds:option(DummyValue, "travelmate_version", translate("Travelmate Version"))
end
dv2 = ds:option(DummyValue, "travelmate_version", translate("Travelmate Version"))
e2.rmempty = true
e3 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
e2.rmempty = true
e3 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
- translate("How many times should travelmate try to connect to an Uplink. ")
+ translate("Retry limit to connect to an uplink. ")
.. translate("To disable this feature set it to '0' which means unlimited retries."))
e3.default = 3
e3.datatype = "range(0,30)"
e3.rmempty = false
.. translate("To disable this feature set it to '0' which means unlimited retries."))
e3.default = 3
e3.datatype = "range(0,30)"
e3.rmempty = false
-e4 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
- translate("How long should travelmate wait for a successful wlan interface reload."))
+e4 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
+ translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
-e4.datatype = "range(5,60)"
+e4.datatype = "range(0,100)"
-e5 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
- translate("Timeout in seconds between retries in 'automatic' mode."))
-e5.default = 60
-e5.datatype = "range(60,300)"
+e5 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
+ translate("How long should travelmate wait for a successful wlan interface reload."))
+e5.default = 30
+e5.datatype = "range(5,60)"
+e6 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
+ translate("Timeout in seconds between retries in 'automatic' mode."))
+e6.default = 60
+e6.datatype = "range(60,300)"
+e6.rmempty = false
+
-<input name="runtime" id="runtime" type="text" class="cbi-input-text" style="outline:none;border:none;box-shadow:none;background:transparent;color:#0069d6;font-weight:bold;line-height:30px;height:30px;" value="<%=self:cfgvalue(section)%>" disabled="disabled" />
+<input name="runtime" id="runtime" type="text" class="cbi-input-text" style="outline:none;border:none;box-shadow:none;background:transparent;color:#0069d6;font-weight:bold;line-height:30px;height:30px;width:50em;" value="<%=self:cfgvalue(section)%>" disabled="disabled" />