msgid "-- custom --"
msgstr "-- custom --"
+msgid "-- match by device --"
+msgstr ""
+
+msgid "-- match by label --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1 Minute Load:"
msgid "15 Minute Load:"
msgstr "15 Minute Load:"
+msgid "464XLAT (CLAT)"
+msgstr ""
+
msgid "5 Minute Load:"
msgstr "5 Minute Load:"
msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgstr ""
+msgid "A43C + J43 + A43"
+msgstr ""
+
+msgid "A43C + J43 + A43 + V43"
+msgstr ""
+
msgid "ADSL"
msgstr ""
-msgid "ADSL Status"
+msgid "AICCU (SIXXS)"
+msgstr ""
+
+msgid "ANSI T1.413"
msgstr ""
msgid "APN"
msgid "ARP retry threshold"
msgstr "ARP retry threshold"
+msgid "ATM (Asynchronous Transfer Mode)"
+msgstr ""
+
msgid "ATM Bridges"
msgstr "ATM Bridges"
msgid "ATM device number"
msgstr "ATM device number"
+msgid "ATU-C System Vendor ID"
+msgstr ""
+
+msgid "AYIYA"
+msgstr ""
+
msgid "Access Concentrator"
msgstr "Access Concentrator"
msgid "Additional Hosts files"
msgstr "Additional Hosts files"
+msgid "Additional servers file"
+msgstr ""
+
msgid "Address"
msgstr "Address"
msgid "Advanced Settings"
msgstr "Advanced Settings"
+msgid "Aggregate Transmit Power(ACTATP)"
+msgstr ""
+
msgid "Alert"
msgstr "Alert"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgid "Always announce default router"
+msgid ""
+"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
+"\">Tunneling Comparison</a> on SIXXS"
msgstr ""
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
+msgid "Always announce default router"
msgstr ""
msgid "An additional network will be created if you leave this unchecked."
msgstr "An additional network will be created if you leave this unchecked."
+msgid "Annex"
+msgstr ""
+
+msgid "Annex A + L + M (all)"
+msgstr ""
+
+msgid "Annex A G.992.1"
+msgstr ""
+
+msgid "Annex A G.992.2"
+msgstr ""
+
+msgid "Annex A G.992.3"
+msgstr ""
+
+msgid "Annex A G.992.5"
+msgstr ""
+
+msgid "Annex B (all)"
+msgstr ""
+
+msgid "Annex B G.992.1"
+msgstr ""
+
+msgid "Annex B G.992.3"
+msgstr ""
+
+msgid "Annex B G.992.5"
+msgstr ""
+
+msgid "Annex J (all)"
+msgstr ""
+
+msgid "Annex L G.992.3 POTS 1"
+msgstr ""
+
+msgid "Annex M (all)"
+msgstr ""
+
+msgid "Annex M G.992.3"
+msgstr ""
+
+msgid "Annex M G.992.5"
+msgstr ""
+
msgid "Announce as default router even if no public prefix is available."
msgstr ""
msgid "Announced DNS servers"
msgstr ""
+msgid "Anonymous Mount"
+msgstr ""
+
+msgid "Anonymous Swap"
+msgstr ""
+
msgid "Antenna 1"
msgstr "Antenna 1"
msgid "Atheros 802.11%s Wireless Controller"
msgstr ""
+msgid "Auth Group"
+msgstr ""
+
+msgid "AuthGroup"
+msgstr ""
+
msgid "Authentication"
msgstr "Authentication"
msgid "Automatic Homenet (HNCP)"
msgstr ""
+msgid "Automatically check filesystem for errors before mounting"
+msgstr ""
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr ""
+
+msgid "Automatically mount swap on hotplug"
+msgstr ""
+
+msgid "Automount Filesystem"
+msgstr ""
+
+msgid "Automount Swap"
+msgstr ""
+
msgid "Available"
msgstr "Available"
msgid "Average:"
msgstr "Average:"
+msgid "B43 + B43C"
+msgstr ""
+
+msgid "B43 + B43C + V43"
+msgstr ""
+
+msgid "BR / DMR / AFTR"
+msgstr ""
+
msgid "BSSID"
msgstr "BSSID"
msgid "Band"
msgstr ""
+msgid "Behind NAT"
+msgstr ""
+
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Buffered"
msgstr "Buffered"
+msgid ""
+"Build/distribution specific feed definitions. This file will NOT be "
+"preserved in any sysupgrade."
+msgstr ""
+
msgid "Buttons"
msgstr "Buttons"
+msgid "CA certificate; if empty it will be saved after the first connection."
+msgstr ""
+
msgid "CPU"
msgstr "CPU"
msgid "CPU usage (%)"
msgstr "CPU usage (%)"
-msgid "Cached"
-msgstr "Cached"
-
msgid "Cancel"
msgstr "Cancel"
msgid "Check"
msgstr "Check"
+msgid "Check fileystems before mount"
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Cipher"
msgstr "Cipher"
+msgid "Cisco UDP encapsulation"
+msgstr ""
+
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
"configuration files. To reset the firmware to its initial state, click "
msgid "Configuration files will be kept."
msgstr "Configuration files will be kept."
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Configures this mount as overlay storage for block-extroot"
-
msgid "Confirmation"
msgstr "Confirmation"
msgid "Connection Limit"
msgstr "Connection Limit"
+msgid "Connection to server fails when TLS cannot be used"
+msgstr ""
+
msgid "Connections"
msgstr "Connections"
msgstr ""
msgid ""
+"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
+"sysupgrade."
+msgstr ""
+
+msgid "Custom feeds"
+msgstr ""
+
+msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgstr ""
msgid "DNS-Label / FQDN"
msgstr ""
+msgid "DPD Idle Timeout"
+msgstr ""
+
msgid "DS-Lite AFTR address"
msgstr ""
+msgid "DSL"
+msgstr ""
+
+msgid "DSL Status"
+msgstr ""
+
+msgid "DSL line mode"
+msgstr ""
+
msgid "DUID"
msgstr ""
+msgid "Data Rate"
+msgstr ""
+
msgid "Debug"
msgstr "Debug"
msgid "Default gateway"
msgstr "Default gateway"
+msgid "Default is stateless + stateful"
+msgstr ""
+
+msgid "Default route"
+msgstr ""
+
msgid "Default state"
msgstr "Default state"
msgid "Delete"
msgstr "Delete"
-msgid "Delete this interface"
-msgstr "Delete this interface"
-
msgid "Delete this network"
msgstr "Delete this network"
msgid "Device Configuration"
msgstr "Device Configuration"
+msgid "Device is rebooting..."
+msgstr ""
+
+msgid "Device unreachable"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostics"
msgid "Disable DNS setup"
msgstr ""
+msgid "Disable Encryption"
+msgstr ""
+
msgid "Disable HW-Beacon timer"
msgstr "Disable HW-Beacon timer"
msgid "Distance to farthest network member in meters."
msgstr "Distance to farthest network member in meters."
+msgid "Distribution feeds"
+msgstr ""
+
msgid "Diversity"
msgstr "Diversity"
"having static leases will be served."
msgstr ""
+msgid "EA-bits length"
+msgstr ""
+
msgid "EAP-Method"
msgstr "EAP-Method"
msgid "Edit"
msgstr "Edit"
+msgid ""
+"Edit the raw configuration data above to fix any error and hit \"Save\" to "
+"reload the page."
+msgstr ""
+
msgid "Edit this interface"
msgstr ""
msgid "Enable NTP client"
msgstr ""
+msgid "Enable Single DES"
+msgstr ""
+
msgid "Enable TFTP server"
msgstr ""
msgid "Enable VLAN functionality"
msgstr ""
+msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
+msgstr ""
+
msgid "Enable learning and aging"
msgstr ""
+msgid "Enable mirroring of incoming packets"
+msgstr ""
+
+msgid "Enable mirroring of outgoing packets"
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Error"
msgstr "Error"
+msgid "Errored seconds (ES)"
+msgstr ""
+
msgid "Ethernet Adapter"
msgstr "Ethernet Adapter"
msgid "External system log server port"
msgstr ""
+msgid "Extra SSH command options"
+msgstr ""
+
msgid "Fast Frames"
msgstr "Fast Frames"
msgid "Filter useless"
msgstr "Filter useless"
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+
msgid "Find and join network"
msgstr ""
msgid "Firewall Status"
msgstr "Firewall Status"
+msgid "Firmware File"
+msgstr ""
+
msgid "Firmware Version"
msgstr ""
msgid "Fixed source port for outbound DNS queries"
msgstr ""
-msgid "Flags"
-msgstr "Flags"
-
msgid "Flash Firmware"
msgstr "Flash Firmware"
msgid "Force"
msgstr "Force"
-msgid "Force 40MHz mode"
-msgstr ""
-
msgid "Force CCMP (AES)"
msgstr ""
msgid "Force TKIP and CCMP (AES)"
msgstr ""
+msgid "Force use of NAT-T"
+msgstr ""
+
+msgid "Form token mismatch"
+msgstr ""
+
msgid "Forward DHCP traffic"
msgstr ""
+msgid "Forward Error Correction Seconds (FECS)"
+msgstr ""
+
msgid "Forward broadcast traffic"
msgstr ""
msgid "Free space"
msgstr ""
-msgid "Frequency Hopping"
-msgstr "Frequency Hopping"
-
msgid "GHz"
msgstr ""
msgid "General Setup"
msgstr "General Setup"
+msgid "General options for opkg"
+msgstr ""
+
+msgid "Generate Config"
+msgstr ""
+
msgid "Generate archive"
msgstr ""
msgid "Given password confirmation did not match, password not changed!"
msgstr ""
+msgid "Global Settings"
+msgstr ""
+
msgid "Global network options"
msgstr ""
msgid "Go to relevant configuration page"
msgstr "Go to relevant configuration page"
+msgid "Group Password"
+msgstr ""
+
msgid "Guest"
msgstr ""
msgid "HE.net username"
msgstr ""
-msgid "HT mode (802.11n)"
-msgstr ""
-
msgid "Handler"
msgstr "Handler"
msgid "Hang Up"
msgstr "Hang Up"
+msgid "Header Error Code Errors (HEC)"
+msgstr ""
+
+msgid "Heartbeat"
+msgstr ""
+
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgid "Host"
+msgstr ""
+
msgid "Host entries"
msgstr "Host entries"
msgid "Hostnames"
msgstr "Hostnames"
+msgid "Hybrid"
+msgstr ""
+
+msgid "IKE DH Group"
+msgstr ""
+
msgid "IP address"
msgstr "IP address"
msgid "IPv4 only"
msgstr ""
+msgid "IPv4 prefix"
+msgstr ""
+
msgid "IPv4 prefix length"
msgstr ""
msgid "IPv6 Firewall"
msgstr ""
+msgid "IPv6 Neighbours"
+msgstr ""
+
msgid "IPv6 Settings"
msgstr ""
msgid "IPv6 address"
msgstr ""
+msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
+msgstr ""
+
msgid "IPv6 assignment hint"
msgstr ""
msgid "Identity"
msgstr "Identity"
+msgid "If checked, 1DES is enaled"
+msgstr ""
+
+msgid "If checked, encryption is disabled"
+msgstr ""
+
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
msgstr ""
"slow process as the swap-device cannot be accessed with the high datarates "
"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgid "Ignore Hosts files"
-msgstr ""
+msgid "Ignore <code>/etc/hosts</code>"
+msgstr "Ignore <code>/etc/hosts</code>"
msgid "Ignore interface"
msgstr "Ignore interface"
msgid "In"
msgstr "In"
+msgid ""
+"In order to prevent unauthorized access to the system, your request has been "
+"blocked. Click \"Continue »\" below to return to the previous page."
+msgstr ""
+
msgid "Inactivity timeout"
msgstr ""
msgid "Interfaces"
msgstr "Interfaces"
+msgid "Internal"
+msgstr ""
+
msgid "Internal Server Error"
msgstr ""
msgid "Language and Style"
msgstr ""
+msgid "Latency"
+msgstr ""
+
+msgid "Leaf"
+msgstr ""
+
+msgid "Lease time"
+msgstr ""
+
msgid "Lease validity time"
msgstr ""
msgid "Limit"
msgstr "Limit"
-msgid "Line Attenuation"
+msgid "Line Attenuation (LATN)"
msgstr ""
-msgid "Line Speed"
+msgid "Line Mode"
msgstr ""
msgid "Line State"
msgstr ""
+msgid "Line Uptime"
+msgstr ""
+
msgid "Link On"
msgstr "Link On"
"requests to"
msgstr ""
+msgid "List of SSH key files for auth"
+msgstr ""
+
msgid "List of domains to allow RFC1918 responses for"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Local IP address to assign"
+msgstr ""
+
msgid "Local IPv4 address"
msgstr ""
msgid "Localise queries"
msgstr "Localise queries"
-msgid "Locked to channel %d used by %s"
+msgid "Locked to channel %s used by: %s"
msgstr ""
msgid "Log output level"
msgid "Logout"
msgstr "Logout"
+msgid "Loss of Signal Seconds (LOSS)"
+msgstr ""
+
msgid "Lowest leased address as offset from the network address."
msgstr ""
msgid "MAC-List"
msgstr "MAC-List"
+msgid "MAP / LW4over6"
+msgstr ""
+
msgid "MB/s"
msgstr ""
msgid "MTU"
msgstr ""
+msgid ""
+"Make sure to clone the root filesystem using something like the commands "
+"below:"
+msgstr ""
+
+msgid "Manual"
+msgstr ""
+
+msgid "Max. Attainable Data Rate (ATTNDR)"
+msgstr ""
+
msgid "Maximum Rate"
msgstr "Maximum Rate"
msgid "Maximum hold time"
msgstr "Maximum hold time"
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
msgid "Maximum number of leased addresses."
msgstr ""
msgid "Minimum hold time"
msgstr "Minimum hold time"
+msgid "Mirror monitor port"
+msgstr ""
+
+msgid "Mirror source port"
+msgstr ""
+
msgid "Missing protocol extension for proto %q"
msgstr ""
"Mount Points define at which point a memory device will be attached to the "
"filesystem"
+msgid "Mount filesystems not specifically configured"
+msgstr ""
+
msgid "Mount options"
msgstr ""
msgid "Mount point"
msgstr ""
+msgid "Mount swap not specifically configured"
+msgstr ""
+
msgid "Mounted file systems"
msgstr "Mounted file systems"
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NAT-T Mode"
+msgstr ""
+
+msgid "NAT64 Prefix"
+msgstr ""
+
msgid "NDP-Proxy"
msgstr ""
+msgid "NT Domain"
+msgstr ""
+
msgid "NTP server candidates"
msgstr ""
+msgid "NTP sync time-out"
+msgstr ""
+
msgid "Name"
msgstr "Name"
msgid "No DHCP Server configured for this interface"
msgstr ""
+msgid "No NAT-T"
+msgstr ""
+
msgid "No chains in this table"
msgstr "No chains in this table"
msgid "Noise"
msgstr "Noise"
-msgid "Noise Margin"
+msgid "Noise Margin (SNR)"
msgstr ""
msgid "Noise:"
msgstr ""
+msgid "Non Pre-emtive CRC errors (CRC_P)"
+msgstr ""
+
msgid "None"
msgstr ""
msgid "Note: Configuration files will be erased."
msgstr ""
+msgid "Note: interface name length"
+msgstr ""
+
msgid "Notice"
msgstr ""
msgid "OPKG-Configuration"
msgstr "OPKG-Configuration"
+msgid "Obfuscated Group Password"
+msgstr ""
+
+msgid "Obfuscated Password"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "One or more fields contain invalid values!"
msgstr ""
+msgid "One or more invalid/required values on tab"
+msgstr ""
+
msgid "One or more required fields have no value!"
msgstr ""
msgid "Open list..."
msgstr ""
+msgid "OpenConnect (CISCO AnyConnect)"
+msgstr ""
+
+msgid "Operating frequency"
+msgstr ""
+
msgid "Option changed"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional, specify to override default server (tic.sixxs.net)"
+msgstr ""
+
+msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr ""
+
msgid "Options"
msgstr "Options"
msgid "Outdoor Channels"
msgstr "Outdoor Channels"
+msgid "Output Interface"
+msgstr ""
+
msgid "Override MAC address"
msgstr ""
msgid "PPPoE"
msgstr ""
+msgid "PPPoSSH"
+msgstr ""
+
msgid "PPtP"
msgstr ""
+msgid "PSID offset"
+msgstr ""
+
+msgid "PSID-bits length"
+msgstr ""
+
+msgid "PTM/EFM (Packet Transfer Mode)"
+msgstr ""
+
msgid "Package libiwinfo required!"
msgstr ""
msgid "Password of Private Key"
msgstr "Password of Private Key"
+msgid "Password of inner Private Key"
+msgstr ""
+
msgid "Password successfully changed!"
msgstr ""
msgid "Path to executable which handles the button event"
msgstr ""
+msgid "Path to inner CA-Certificate"
+msgstr ""
+
+msgid "Path to inner Client-Certificate"
+msgstr ""
+
+msgid "Path to inner Private Key"
+msgstr ""
+
msgid "Peak:"
msgstr ""
+msgid "Peer IP address to assign"
+msgstr ""
+
+msgid "Perfect Forward Secrecy"
+msgstr ""
+
msgid "Perform reboot"
msgstr "Perform reboot"
msgid "Please enter your username and password."
msgstr "Please enter your username and password."
-msgid "Please wait: Device rebooting..."
-msgstr "Please wait: Device rebooting..."
-
msgid "Policy"
msgstr "Policy"
msgid "Port status:"
msgstr ""
+msgid "Power Management Mode"
+msgstr ""
+
+msgid "Pre-emtive CRC errors (CRCP_P)"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Processes"
msgstr "Processes"
+msgid "Profile"
+msgstr ""
+
msgid "Prot."
msgstr "Prot."
msgid "Quality"
msgstr ""
+msgid "RFC3947 NAT-T mode"
+msgstr ""
+
msgid "RTS/CTS Threshold"
msgstr "RTS/CTS Threshold"
msgid "Request IPv6-prefix of length"
msgstr ""
+msgid "Require TLS"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
msgid "Root directory for files served via TFTP"
msgstr ""
+msgid "Root preparation"
+msgstr ""
+
+msgid "Routed IPv6 prefix for downstream interfaces"
+msgstr ""
+
msgid "Router Advertisement-Service"
msgstr ""
"Routes specify over which interface and gateway a certain host or network "
"can be reached."
-msgid "Rule #"
-msgstr "Rule #"
-
msgid "Run a filesystem check before mounting the device"
msgstr ""
msgid "Run filesystem check"
msgstr ""
+msgid ""
+"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
+"use 6in4 instead"
+msgstr ""
+
+msgid "SIXXS-handle[/Tunnel-ID]"
+msgstr ""
+
+msgid "SNR"
+msgstr ""
+
msgid "SSH Access"
msgstr ""
+msgid "SSH server address"
+msgstr ""
+
+msgid "SSH server port"
+msgstr ""
+
+msgid "SSH username"
+msgstr ""
+
msgid "SSH-Keys"
msgstr ""
msgid "Server Settings"
msgstr ""
+msgid "Server password"
+msgstr ""
+
+msgid ""
+"Server password, enter the specific password of the tunnel when the username "
+"contains the tunnel ID"
+msgstr ""
+
+msgid "Server username"
+msgstr ""
+
msgid "Service Name"
msgstr ""
msgid "Setup DHCP Server"
msgstr ""
+msgid "Severely Errored Seconds (SES)"
+msgstr ""
+
+msgid "Short GI"
+msgstr ""
+
msgid "Show current backup file list"
msgstr ""
msgid "Signal"
msgstr "Signal"
+msgid "Signal Attenuation (SATN)"
+msgstr ""
+
msgid "Signal:"
msgstr ""
msgid "Size"
msgstr "Size"
+msgid "Size (.ipk)"
+msgstr ""
+
msgid "Skip"
msgstr "Skip"
msgid "Source"
msgstr "Source"
+msgid "Source routing"
+msgstr ""
+
msgid "Specifies the button state to handle"
msgstr "Specifies the button state to handle"
msgid "Target"
msgstr "Target"
+msgid "Target network"
+msgstr ""
+
msgid "Terminate"
msgstr "Terminate"
"code> and <code>_</code>"
msgstr ""
+msgid "The configuration file could not be loaded due to the following error:"
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgid "The selected protocol needs a device assigned"
msgstr ""
+msgid "The submitted security token is invalid or already expired!"
+msgstr ""
+
msgid ""
"The system is erasing the configuration partition now and will reboot itself "
"when finished."
"settings."
msgid ""
+"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
+"AYIYA"
+msgstr ""
+
+msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgstr ""
msgstr ""
msgid ""
+"This file may contain lines like 'server=/domain/1.2.3.4' or "
+"'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
+"Name System\">DNS</abbr> servers."
+msgstr ""
+
+msgid ""
"This is a list of shell glob patterns for matching files and directories to "
"include during sysupgrade. Modified files in /etc/config/ and certain other "
"configurations are automatically preserved."
"archive here."
msgstr ""
+msgid "Tone"
+msgstr ""
+
msgid "Total Available"
msgstr ""
msgid "Tunnel Link"
msgstr ""
+msgid "Tunnel broker protocol"
+msgstr ""
+
+msgid "Tunnel setup server"
+msgstr ""
+
+msgid "Tunnel type"
+msgstr ""
+
msgid "Turbo Mode"
msgstr "Turbo Mode"
msgid "Unable to dispatch"
msgstr ""
+msgid "Unavailable Seconds (UAS)"
+msgstr ""
+
msgid "Unknown"
msgstr ""
msgid "Unmanaged"
msgstr ""
+msgid "Unmount"
+msgstr ""
+
msgid "Unsaved Changes"
msgstr "Unsaved Changes"
msgid "Use TTL on tunnel interface"
msgstr ""
-msgid "Use as root filesystem"
+msgid "Use as external overlay (/overlay)"
+msgstr ""
+
+msgid "Use as root filesystem (/)"
msgstr ""
msgid "Use broadcast flag"
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
+"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
msgid "Used"
msgid "Used Key Slot"
msgstr ""
+msgid "User certificate (PEM encoded)"
+msgstr ""
+
+msgid "User key (PEM encoded)"
+msgstr ""
+
msgid "Username"
msgstr "Username"
msgid "VC-Mux"
msgstr ""
+msgid "VDSL"
+msgstr ""
+
msgid "VLAN Interface"
msgstr ""
msgid "VLANs on %q (%s)"
msgstr ""
+msgid "VPN Local address"
+msgstr ""
+
+msgid "VPN Local port"
+msgstr ""
+
msgid "VPN Server"
msgstr ""
+msgid "VPN Server port"
+msgstr ""
+
+msgid "VPN Server's certificate SHA1 hash"
+msgstr ""
+
+msgid "VPNC (CISCO 3000 (and others) VPN)"
+msgstr ""
+
+msgid "Vendor"
+msgstr ""
+
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
+msgid "Verbose"
+msgstr ""
+
+msgid "Verbose logging by aiccu daemon"
+msgstr ""
+
msgid "Verify"
msgstr ""
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
"and ad-hoc mode) to be installed."
+msgid ""
+"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
+msgstr ""
+
msgid "Waiting for changes to be applied..."
msgstr ""
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for device..."
+msgstr ""
+
msgid "Warning"
msgstr ""
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Warning: There are unsaved changes that will be lost while rebooting!"
+msgid "Warning: There are unsaved changes that will get lost on reboot!"
+msgstr ""
+
+msgid "Whether to create an IPv6 default route over the tunnel"
+msgstr ""
+
+msgid "Whether to route only packets from delegated prefixes"
+msgstr ""
+
+msgid "Width"
+msgstr ""
msgid "Wifi"
msgstr "Wifi"
"You must enable Java Script in your browser or LuCI will not work properly."
msgstr ""
+msgid ""
+"Your Internet Explorer is too old to display this page correctly. Please "
+"upgrade it to at least version 7 or use another browser like Firefox, Opera "
+"or Safari."
+msgstr ""
+
msgid "any"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> file"
+msgid "minimum 1280, maximum 1480"
+msgstr ""
+
+msgid "navigation Navigation"
+msgstr ""
+
msgid "no"
msgstr ""
msgid "none"
msgstr "none"
+msgid "not present"
+msgstr ""
+
msgid "off"
msgstr ""
msgid "open"
msgstr ""
+msgid "overlay"
+msgstr ""
+
msgid "relay mode"
msgstr ""
msgid "server mode"
msgstr ""
+msgid "skiplink1 Skip to navigation"
+msgstr ""
+
+msgid "skiplink2 Skip to content"
+msgstr ""
+
msgid "stateful-only"
msgstr ""
msgid "« Back"
msgstr "« Back"
+#~ msgid "Delete this interface"
+#~ msgstr "Delete this interface"
+
+#~ msgid "Flags"
+#~ msgstr "Flags"
+
+#~ msgid "Rule #"
+#~ msgstr "Rule #"
+
+#~ msgid "Path"
+#~ msgstr "Path"
+
+#~ msgid "Please wait: Device rebooting..."
+#~ msgstr "Please wait: Device rebooting..."
+
+#~ msgid ""
+#~ "Warning: There are unsaved changes that will be lost while rebooting!"
+#~ msgstr ""
+#~ "Warning: There are unsaved changes that will be lost while rebooting!"
+
+#~ msgid "Cached"
+#~ msgstr "Cached"
+
+#~ msgid "Configures this mount as overlay storage for block-extroot"
+#~ msgstr "Configures this mount as overlay storage for block-extroot"
+
+#~ msgid "Frequency Hopping"
+#~ msgstr "Frequency Hopping"
+
#~ msgid "40MHz 2nd channel above"
#~ msgstr "40MHz 2nd channel above"
#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
#~ "define a new standalone network for this interface."
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignore <code>/etc/hosts</code>"
-
#~ msgid "Independent (Ad-Hoc)"
#~ msgstr "Independent (Ad-Hoc)"
#~ msgid "Number of leased addresses"
#~ msgstr "Number of leased addresses"
-#~ msgid "Path"
-#~ msgstr "Path"
-
#~ msgid "Perform Actions"
#~ msgstr "Perform Actions"
projects / project / luci.git / blobdiff