lantiq: move partitions into partion table node
[openwrt.git] / target / linux / lantiq / dts / VG3503J.dtsi
1 /include/ "vr9.dtsi"
2
3 / {
4         model = "VG3503J - BT OpenReach VDSL Modem";
5
6         chosen {
7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8
9                 leds {
10                         boot = &power_green;
11                         failsafe = &power_red;
12                         running = &power_green;
13
14                         internet = &dsl;
15                 };
16         };
17
18         memory@0 {
19                 reg = <0x0 0x2000000>;
20         };
21
22         fpi@10000000 {
23                 localbus@0 {
24                         ranges = <0 0 0x0 0x3ffffff>;
25                         nor-boot@0 {
26                                 compatible = "lantiq,nor";
27                                 bank-width = <2>;
28                                 reg = <0 0x0 0x2000000>;
29                                 #address-cells = <1>;
30                                 #size-cells = <1>;
31
32                                 partitions {
33                                         compatible = "fixed-partitions";
34                                         #address-cells = <1>;
35                                         #size-cells = <1>;
36
37                                         partition@0 {
38                                                 label = "uboot";
39                                                 reg = <0x00000 0x20000>;
40                                         };
41
42                                         partition@20000 {
43                                                 label = "kernel";
44                                                 reg = <0x20000 0x300000>;
45                                         };
46
47                                         partition@1a0000 {
48                                                 label = "rootfs";
49                                                 reg = <0x320000 0x420000>;
50                                         };
51
52                                         partition@740000 {
53                                                 label = "btagent";
54                                                 reg = <0x740000 0x80000>;
55                                         };
56
57                                         partition@7c0000 {
58                                                 label = "pri_bfocus_cfg";
59                                                 reg = <0x7c0000 0x10000>;
60                                         };
61
62                                         partition@7d0000 {
63                                                 label = "sec_bfocus_cfg";
64                                                 reg = <0x7d0000 0x10000>;
65                                         };
66
67                                         partition@7e0000 {
68                                                 label = "sysconfig";
69                                                 reg = <0x7e0000 0x10000>;
70                                         };
71
72                                         partition@7f0000 {
73                                                 label = "misc_cfg";
74                                                 reg = <0x7f0000 0x10000>;
75                                         };
76                                 };
77                         };
78                 };
79
80                 gpio: pinmux@E100B10 {
81                         pinctrl-names = "default";
82                         pinctrl-0 = <&state_default>;
83
84                         state_default: pinmux {
85                                 mdio {
86                                         lantiq,groups = "mdio";
87                                         lantiq,function = "mdio";
88                                 };
89                                 gphy-leds {
90                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
91                                                         "gphy0 led2", "gphy1 led0",
92                                                         "gphy1 led1", "gphy1 led2";
93                                         lantiq,function = "gphy";
94                                         lantiq,pull = <2>;
95                                         lantiq,open-drain = <0>;
96                                         lantiq,output = <1>;
97                                 };
98                         };
99                 };
100         };
101
102         gpio-keys-polled {
103                 compatible = "gpio-keys-polled";
104                 #address-cells = <1>;
105                 #size-cells = <0>;
106                 poll-interval = <100>;
107                 reset {
108                         label = "reset";
109                         gpios = <&gpio 6 1>;
110                         linux,code = <0x198>;
111                 };
112         };
113
114         gpio-leds {
115                 compatible = "gpio-leds";
116
117                 power_red: power2 {
118                         label = "vg3503j:red:power";
119                         gpios = <&gpio 14 1>;
120                 };
121                 dsl: dsl {
122                         label = "vg3503j:green:dsl";
123                         gpios = <&gpio 19 1>;
124                 };
125                 power_green: power {
126                         label = "vg3503j:green:power";
127                         gpios = <&gpio 28 1>;
128                         default-state = "keep";
129                 };
130         };
131 };
132
133 &eth0 {
134         interface@0 {
135                 compatible = "lantiq,xrx200-pdi";
136                 #address-cells = <1>;
137                 #size-cells = <0>;
138                 reg = <0>;
139                 mac-address = [ 00 11 22 33 44 55 ];
140                 lantiq,switch;
141                 ethernet@2 {
142                         compatible = "lantiq,xrx200-pdi-port";
143                         reg = <2>;
144                         phy-mode = "mii";
145                         phy-handle = <&phy11>;
146                 };
147                 ethernet@4 {
148                         compatible = "lantiq,xrx200-pdi-port";
149                         reg = <4>;
150                         phy-mode = "mii";
151                         phy-handle = <&phy13>;
152                 };
153         };
154
155         mdio@0 {
156                 #address-cells = <1>;
157                 #size-cells = <0>;
158                 compatible = "lantiq,xrx200-mdio";
159                 phy11: ethernet-phy@11 {
160                         reg = <0x11>;
161                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
162                         lantiq,led1h = <0x70>;
163                         lantiq,led1l = <0x00>;
164                         lantiq,led2h = <0x00>;
165                         lantiq,led2l = <0x03>;
166                 };
167                 phy13: ethernet-phy@13 {
168                         reg = <0x13>;
169                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
170                         lantiq,led1h = <0x70>;
171                         lantiq,led1l = <0x00>;
172                         lantiq,led2h = <0x00>;
173                         lantiq,led2l = <0x03>;
174                 };
175         };
176 };