target/linux/lantiq/dts/VG3503J.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VG3503J - BT OpenReach VDSL Modem";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8
   9                 leds {
  10                         dsl = &dsl;
  11                         power = &power;
  12                         power2 = &power2;
  13                 };
  14         };
  15
  16         memory@0 {
  17                 reg = <0x0 0x2000000>;
  18         };
  19
  20         fpi@10000000 {
  21                 localbus@0 {
  22                         ranges = <0 0 0x0 0x3ffffff>;
  23                         nor-boot@0 {
  24                                 compatible = "lantiq,nor";
  25                                 bank-width = <2>;
  26                                 reg = <0 0x0 0x2000000>;
  27                                 #address-cells = <1>;
  28                                 #size-cells = <1>;
  29
  30                                 partition@0 {
  31                                         label = "uboot";
  32                                         reg = <0x00000 0x20000>;
  33                                 };
  34
  35                                 partition@20000 {
  36                                         label = "kernel";
  37                                         reg = <0x20000 0x300000>;
  38                                 };
  39
  40                                 partition@1a0000 {
  41                                         label = "rootfs";
  42                                         reg = <0x320000 0x420000>;
  43                                 };
  44
  45                                 partition@740000 {
  46                                         label = "btagent";
  47                                         reg = <0x740000 0x80000>;
  48                                 };
  49
  50                                 partition@7c0000 {
  51                                         label = "pri_bfocus_cfg";
  52                                         reg = <0x7c0000 0x10000>;
  53                                 };
  54
  55                                 partition@7d0000 {
  56                                         label = "sec_bfocus_cfg";
  57                                         reg = <0x7d0000 0x10000>;
  58                                 };
  59
  60                                 partition@7e0000 {
  61                                         label = "sysconfig";
  62                                         reg = <0x7e0000 0x10000>;
  63                                 };
  64
  65                                 partition@7f0000 {
  66                                         label = "misc_cfg";
  67                                         reg = <0x7f0000 0x10000>;
  68                                 };
  69                         };
  70                 };
  71
  72                 gpio: pinmux@E100B10 {
  73                         pinctrl-names = "default";
  74                         pinctrl-0 = <&state_default>;
  75
  76                         state_default: pinmux {
  77                                 mdio {
  78                                         lantiq,groups = "mdio";
  79                                         lantiq,function = "mdio";
  80                                 };
  81                                 gphy-leds {
  82                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  83                                                         "gphy0 led2", "gphy1 led0",
  84                                                         "gphy1 led1", "gphy1 led2";
  85                                         lantiq,function = "gphy";
  86                                         lantiq,pull = <2>;
  87                                         lantiq,open-drain = <0>;
  88                                         lantiq,output = <1>;
  89                                 };
  90                         };
  91                 };
  92
  93                 eth@E108000 {
  94                         #address-cells = <1>;
  95                         #size-cells = <0>;
  96                         compatible = "lantiq,xrx200-net";
  97                         reg = < 0xE108000 0x3000 /* switch */
  98                                 0xE10B100 0x70 /* mdio */
  99                                 0xE10B1D8 0x30 /* mii */
 100                                 0xE10B308 0x30 /* pmac */
 101                         >;
 102                         interrupt-parent = <&icu0>;
 103                         interrupts = <73 72>;
 104
 105                         interface@0 {
 106                                 compatible = "lantiq,xrx200-pdi";
 107                                 #address-cells = <1>;
 108                                 #size-cells = <0>;
 109                                 reg = <0>;
 110                                 mac-address = [ 00 11 22 33 44 55 ];
 111                                 lantiq,switch;
 112                                 ethernet@2 {
 113                                         compatible = "lantiq,xrx200-pdi-port";
 114                                         reg = <2>;
 115                                         phy-mode = "mii";
 116                                         phy-handle = <&phy11>;
 117                                 };
 118                                 ethernet@4 {
 119                                         compatible = "lantiq,xrx200-pdi-port";
 120                                         reg = <4>;
 121                                         phy-mode = "mii";
 122                                         phy-handle = <&phy13>;
 123                                 };
 124                         };
 125
 126                         mdio@0 {
 127                                 #address-cells = <1>;
 128                                 #size-cells = <0>;
 129                                 compatible = "lantiq,xrx200-mdio";
 130                                 phy11: ethernet-phy@11 {
 131                                         reg = <0x11>;
 132                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 133                                 };
 134                                 phy13: ethernet-phy@13 {
 135                                         reg = <0x13>;
 136                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 137                                 };
 138                         };
 139                 };
 140         };
 141
 142         gpio-keys-polled {
 143                 compatible = "gpio-keys-polled";
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146                 poll-interval = <100>;
 147                 reset {
 148                         label = "reset";
 149                         gpios = <&gpio 6 1>;
 150                         linux,code = <0x198>;
 151                 };
 152         };
 153
 154         gpio-leds {
 155                 compatible = "gpio-leds";
 156
 157                 power2: power2 {
 158                         label = "power2";
 159                         gpios = <&gpio 14 1>;
 160                 };
 161                 dsl: dsl {
 162                         label = "bt:green:dsl";
 163                         gpios = <&gpio 19 1>;
 164                 };
 165                 power: power {
 166                         label = "power";
 167                         gpios = <&gpio 28 1>;
 168                 };
 169         };
 170 };