packages/madwimax: rename initscript file

[packages.git] / ipv6 / aiccu / files / aiccu.conf

diff --git a/ipv6/aiccu/files/aiccu.conf b/ipv6/aiccu/files/aiccu.conf
index ecd5bbf..671fd16 100755 (executable)
--- a/ipv6/aiccu/files/aiccu.conf
+++ b/ipv6/aiccu/files/aiccu.conf
@@ -1,78 +1,11 @@
-# AICCU Configuration
-
-# Login information (defaults: none)
-#username <your nichandle/username>
-#password <your password>
-
-# Protocol and server to use for setting up the tunnel (defaults: none)
-#protocol <tic|tsp|l2tp>
-#server <server to use>
-
-# Interface names to use (default: aiccu)
-# ipv6_interface is the name of the interface that will be used as a tunnel interface.
-# On *BSD the ipv6_interface should be set to gifX (eg gif0) for proto-41 tunnels
-# or tunX (eg tun0) for AYIYA tunnels.
-ipv6_interface sixxs
-
-# The tunnel_id to use (default: none)
-# (only required when there are multiple tunnels in the list)
-#tunnel_id Txxxx
-
-# Be verbose? (default: false)
-verbose false
-
-# Daemonize? (default: true)
-# Set to false if you want to see any output
-# When true output goes to syslog
-#
-# WARNING: never run AICCU from DaemonTools or a similar automated
-# 'restart' tool/script. When AICCU does not start, it has a reason
-# not to start which it gives on either the stdout or in the (sys)log
-# file. The TIC server *will* automatically disable accounts which
-# are detected to run in this mode.
-#
-daemonize true
-
-# Automatic Login and Tunnel activation?
-automatic true
-
-# Require TLS?
-# When set to true, if TLS is not supported on the server
-# the TIC transaction will fail.
-# When set to false, it will try a starttls, when that is
-# not supported it will continue.
-# In any case if AICCU is build with TLS support it will
-# try to do a 'starttls' to the TIC server to see if that
-# is supported.
-requiretls false
-
-# PID File
-pidfile /var/run/aiccu.pid
-
-# Add a default route (default: true)
-defaultroute true
-
-# Script to run after setting up the interfaces (default: none)
-#setupscript /usr/local/etc/aiccu-subnets.sh
-
-# Make heartbeats (default true)
-# In general you don't want to turn this off
-# Of course only applies to AYIYA and heartbeat tunnels not to static ones
-#makebeats true
-
-# Don't configure anything (default: false)
-#noconfigure true
-
-# Behind NAT (default: false)
-# Notify the user that a NAT-kind network is detected
-#behindnat true
-
-# Local IPv4 Override (default: none)
-# Overrides the IPv4 parameter received from TIC
-# This allows one to configure a NAT into "DMZ" mode and then
-# forwarding the proto-41 packets to an internal host.
-# 
-# This is only needed for static proto-41 tunnels!
-# AYIYA and heartbeat tunnels don't require this.
-#local_ipv4_override
-
+config aiccu
+       option username         ''
+       option password         ''
+       option protocol         ''
+       option server           ''
+       option interface        ''
+       option tunnel_id        ''
+       option requiretls       ''
+       option defaultroute     '1'
+       option nat              '1'
+       option heartbeat        '1'