+++ /dev/null
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2009 Steven Barth <steven@midlink.org>
-Copyright 2009 Jo-Philipp Wich <xm@subsignal.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-local bridge = (arg[1] == "bridgelan")
-local niulib = require "luci.niulib"
-local fs = require "nixio.fs"
-local has_ipv6 = fs.access("/proc/net/ipv6_route")
-
-m = Map("network", translate("Configure Local Network"), bridge and
-translate([[The wireless network will be connected directly to your local network.
-Make sure you to assign any address to this device that is in the same subnet
-of the other devices in your network but that is not already occupied.
-If you have a DHCP-Server in this network you may also choose DHCP for address configuration.]])
-or translate("These settings affect the devices in your local network. "..
-"Usually you do not need to change anything here for this device to work correctly."))
-
-s = m:section(NamedSection, "lan", "interface", "Network Settings")
-s.addremove = false
-
-s:tab("general", translate("General Settings"))
-s:tab("expert", translate("Expert Settings"))
-
-p = s:taboption("expert", ListValue, "proto", translate("Address Configuration"))
-p.default = "static"
-p:value("static", translate("Static Configuration"))
-p:value("dhcp", "DHCP")
-
-
-ipaddr = s:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
-ipaddr.default = "192.168.0.1"
-ipaddr:depends("proto", "static")
-
-nm = s:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
-nm.default = "255.255.255.0"
-nm:value("255.255.255.0")
-nm:value("255.255.0.0")
-nm:value("255.0.0.0")
-nm:depends("proto", "static")
-
-
-mac = s:taboption("expert", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
-
-mtu = s:taboption("expert", Value, "mtu", "MTU")
-mtu.isinteger = true
-
-dns = s:taboption("expert", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"))
-dns:depends("peerdns", "")
-
-
-gw = s:taboption(bridge and "general" or "expert", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
-gw:depends("proto", "static")
-
-bcast = s:taboption("expert", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
-bcast:depends("proto", "static")
-
-
-if has_ipv6 then
- ip6addr = s:taboption("expert", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
- ip6addr:depends("proto", "static")
- ip6gw = s:taboption("expert", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
- ip6gw:depends("proto", "static")
-end
-
-emerg = s:taboption("expert", Value, "_emergv4", translate("Emergency Access Address"),
-translate([[In case the DHCP request fails you will still be able to access this device using given IP
-by configuring your computer to an address in the same subnet and netmask 255.255.255.0.]]))
-emerg:depends("proto", "dhcp")
-emerg:value("", translate("disable"))
-emerg.default = "169.254.255.169"
-
-
-stp = s:taboption("expert", Flag, "stp", translate("Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"),
- translate("Enables the Spanning Tree Protocol on this bridge"))
-
-ifname_multi = s:taboption("expert", MultiValue, "ifname", translate("Interface"))
-ifname_multi.widget = "checkbox"
-for _, eth in ipairs(niulib.eth_get_available("lan")) do
- ifname_multi:value(eth, translate("Ethernet-Adapter (%s)") % eth)
-end
-
-
-m2 = Map("dhcp")
-
-s = m2:section(TypedSection, "dhcp", "DHCP")
-s.anonymous = true
-s.addremove = false
-s.dynamic = false
-
-s:tab("general", translate("General Settings"))
-
-s:depends("interface", "lan")
-
-enable = s:taboption("general", ListValue, "ignore", translate("Automatic address assignment for network devices"),
-bridge and
-translate("Note: Be careful that you do not accidently two DHCP servers in the same network with overlapping address ranges.")
-or "")
-enable:value(0, translate("enable"), {["network.lan.proto"] = "static"})
-enable:value(1, translate("disable"))
-
-
-s:tab("expert", translate("Expert Settings"))
-start = s:taboption("expert", Value, "start", translate("First leased address"))
-start:depends("ignore", "0")
-start.default = "100"
-
-limit = s:taboption("expert", Value, "limit", translate("Number of leased addresses"), "")
-limit:depends("ignore", "0")
-limit.default = "150"
-
-time = s:taboption("expert", Value, "leasetime", translate("Lease Time"))
-time:depends("ignore", "0")
-time.default = "12h"
-
-local dd = s:taboption("expert", Flag, "dynamicdhcp", translate("Also generate addresses for unknown devices"))
-dd.rmempty = false
-dd.default = "1"
-dd:depends("ignore", "0")
-
-return m, m2
\ No newline at end of file
projects / project / luci.git / blobdiff