applications/luci-dump1090: update config to latest version

[project/luci.git] / applications / luci-app-dump1090 / luasrc / model / cbi / dump1090.lua

diff --git a/applications/luci-app-dump1090/luasrc/model/cbi/dump1090.lua b/applications/luci-app-dump1090/luasrc/model/cbi/dump1090.lua
index 6015ffe..8559c52 100644 (file)
--- a/applications/luci-app-dump1090/luasrc/model/cbi/dump1090.lua
+++ b/applications/luci-app-dump1090/luasrc/model/cbi/dump1090.lua
@@ -1,4 +1,4 @@
--- Copyright 2014 Álvaro Fernández Rojas <noltari@gmail.com>
+-- Copyright 2014-2015 Álvaro Fernández Rojas <noltari@gmail.com>
 -- Licensed to the public under the Apache License 2.0.
 
 m = Map("dump1090", "dump1090", translate("dump1090 is a Mode S decoder specifically designed for RTLSDR devices, here you can configure the settings."))
@@ -12,6 +12,7 @@ enable.enabled="0"
 enable.disabled="1"
 enable.default = "1"
 enable.rmempty = false
+
 respawn=s:option(Flag, "respawn", translate("Respawn"))
 respawn.default = false
 
@@ -34,6 +35,15 @@ ifile=s:option(Value, "ifile", translate("Data file"))
 ifile.rmempty = true
 ifile.datatype = "file"
 
+iformat=s:option(ListValue, "iformat", translate("Sample format for data file"))
+iformat:value("", translate("Default"))
+iformat:value("UC8")
+iformat:value("SC16")
+iformat:value("SC16Q11")
+
+throttle=s:option(Flag, "throttle", translate("When reading from a file play back in realtime, not at max speed"))
+throttle.default = false
+
 raw=s:option(Flag, "raw", translate("Show only messages hex values"))
 raw.default = false
 
@@ -76,13 +86,17 @@ net_bo_port=s:option(Value, "net_bo_port", translate("TCP Beast output listen po
 net_bo_port.rmempty = true
 net_bo_port.datatype = "port"
 
+net_fatsv_port=s:option(Value, "net_fatsv_port", translate("FlightAware TSV output port"))
+net_fatsv_port.rmempty = true
+net_fatsv_port.datatype = "port"
+
 net_ro_size=s:option(Value, "net_ro_size", translate("TCP raw output minimum size"))
 net_ro_size.rmempty = true
 net_ro_size.datatype = "uinteger"
 
-net_ro_rate=s:option(Value, "net_ro_rate", translate("TCP raw output memory flush rate"))
-net_ro_rate.rmempty = true
-net_ro_rate.datatype = "uinteger"
+net_ro_interval=s:option(Value, "net_ro_interval", translate("TCP raw output memory flush rate in seconds"))
+net_ro_interval.rmempty = true
+net_ro_interval.datatype = "uinteger"
 
 net_heartbeat=s:option(Value, "net_heartbeat", translate("TCP heartbeat rate in seconds"))
 net_heartbeat.rmempty = true
@@ -92,6 +106,12 @@ net_buffer=s:option(Value, "net_buffer", translate("TCP buffer size 64Kb * (2^n)
 net_buffer.rmempty = true
 net_buffer.datatype = "uinteger"
 
+net_verbatim=s:option(Flag, "net_verbatim", translate("Do not apply CRC corrections to messages we forward"))
+net_verbatim.default = false
+
+forward_mlat=s:option(Flag, "forward_mlat", translate("Allow forwarding of received mlat results to output ports"))
+forward_mlat.default = false
+
 lat=s:option(Value, "lat", translate("Reference/receiver latitude for surface posn"))
 lat.rmempty = true
 lat.datatype = "integer"
@@ -100,6 +120,10 @@ lon=s:option(Value, "lon", translate("Reference/receiver longitude for surface p
 lon.rmempty = true
 lon.datatype = "integer"
 
+max_range=s:option(Value, "max_range", translate("Absolute maximum range for position decoding"))
+max_range.rmempty = true
+max_range.datatype = "uinteger"
+
 fix=s:option(Flag, "fix", translate("Enable single-bits error correction using CRC"))
 fix.default = false
 
@@ -121,6 +145,9 @@ mlat.default = false
 stats=s:option(Flag, "stats", translate("Print stats at exit"))
 stats.default = false
 
+stats_range=s:option(Flag, "stats_range", translate("Collect/show range histogram"))
+stats_range.default = false
+
 stats_every=s:option(Value, "stats_every", translate("Show and reset stats every seconds"))
 stats_every.rmempty = true
 stats_every.datatype = "uinteger"
@@ -131,15 +158,42 @@ onlyaddr.default = false
 metric=s:option(Flag, "metric", translate("Use metric units"))
 metric.default = false
 
-snip=s:option(Flag, "snip", translate("Strip IQ file removing samples"))
+snip=s:option(Value, "snip", translate("Strip IQ file removing samples"))
 snip.rmempty = true
 snip.datatype = "uinteger"
 
-debug_mode=s:option(Flag, "debug", translate("Debug mode flags"))
+debug_mode=s:option(Value, "debug", translate("Debug mode flags"))
 debug_mode.rmempty = true
 
-ppm=s:option(Flag, "ppm", translate("Set receiver error in parts per million"))
+ppm=s:option(Value, "ppm", translate("Set receiver error in parts per million"))
 ppm.rmempty = true
 ppm.datatype = "uinteger"
 
+html_dir=s:option(Value, "html_dir", translate("Base directory for the internal HTTP server"))
+html_dir.rmempty = true
+html_dir.datatype = "directory"
+
+write_json=s:option(Value, "write_json", translate("Periodically write json output to a directory"))
+write_json.rmempty = true
+write_json.datatype = "directory"
+
+write_json_every=s:option(Flag, "write_json_every", translate("Write json output every t seconds"))
+write_json_every.rmempty = true
+write_json_every.datatype = "uinteger"
+
+json_location_accuracy=s:option(ListValue, "json_location_accuracy", translate("Accuracy of receiver location in json metadata"))
+json_location_accuracy:value("", translate("Default"))
+json_location_accuracy:value("0", "No location")
+json_location_accuracy:value("1", "Approximate")
+json_location_accuracy:value("2", "Exact")
+
+oversample=s:option(Flag, "oversample", translate("Use the 2.4MHz demodulator"))
+oversample.default = false
+
+dcfilter=s:option(Flag, "dcfilter", translate("Apply a 1Hz DC filter to input data"))
+dcfilter.default = false
+
+measure_noise=s:option(Flag, "measure_noise", translate("Measure noise power"))
+measure_noise.default = false
+
 return m