From d6b7e6eaffe6641aeade63f18d3befa624e2a7f9 Mon Sep 17 00:00:00 2001 From: blogic Date: Mon, 6 Oct 2014 04:52:07 +0000 Subject: [PATCH] ramips: Support for RAMIPS based Tripmate HT-TM02 board MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/base-files/etc/board.d/01_leds | 4 + .../linux/ramips/base-files/etc/board.d/02_network | 7 ++ target/linux/ramips/base-files/etc/diag.sh | 3 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/HT-TM02.dts | 104 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + target/linux/ramips/rt305x/profiles/hootoo.mk | 28 ++++++ 8 files changed, 153 insertions(+) create mode 100644 target/linux/ramips/dts/HT-TM02.dts create mode 100644 target/linux/ramips/rt305x/profiles/hootoo.mk diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index bf646ed53b..ecaaaff764 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -112,6 +112,10 @@ case $board in hlk-rm04) set_wifi_led "rt2800pci-phy0::radio" ;; + ht-tm02) + ucidef_set_led_netdev "eth" "ETH" "ht-tm02:white:status" "eth0" + set_wifi_led "ht-tm02:blue:wifi" + ;; all0239-3g|\ hw550-3g) set_usb_led "hw550-3g:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index e027b3be89..c462fd8142 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -97,6 +97,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "4 9t" ;; + ht-tm02) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "4 6t" + ;; + 3g-6200n | \ dir-610-a1 | \ dir-300-b7 | \ @@ -253,6 +259,7 @@ ramips_setup_macs() hlk-rm04 | \ mpr-a1 | \ mpr-a2 | \ + ht-tm02 | \ dir-300-b7 | \ dir-320-b1 | \ psr-680w |\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 9ad7ccbda1..9752eb22ec 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -63,6 +63,9 @@ get_status_led() { hlk-rm04) status_led="hlk-rm04:red:power" ;; + ht-tm02) + status_led="ht-tm02:white:status" + ;; all0239-3g|\ hw550-3g) status_led="hw550-3g:green:status" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index bb42ace621..68ff509a4e 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -157,6 +157,9 @@ ramips_board_detect() { *"HILINK HLK-RM04") name="hlk-rm04" ;; + *"HOOTOO HT-TM02") + name="ht-tm02" + ;; *"HAME MPR-A1") name="mpr-a1" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 407c21838a..4aec78099a 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -52,6 +52,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ hlk-rm04 | \ + ht-tm02 | \ ip2202 | \ m3 | \ m4 | \ diff --git a/target/linux/ramips/dts/HT-TM02.dts b/target/linux/ramips/dts/HT-TM02.dts new file mode 100644 index 0000000000..1f456f0546 --- /dev/null +++ b/target/linux/ramips/dts/HT-TM02.dts @@ -0,0 +1,104 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "HT-TM02", "ralink,rt5350-soc"; + model = "HOOTOO HT-TM02"; + + palmbus@10000000 { + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "ht-tm02:blue:wifi"; + gpios = <&gpio0 7 1>; + }; + status { + label = "ht-tm02:yellow:status"; + gpios = <&gpio0 12 1>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 35057e49e4..c365d9dbb5 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -434,6 +434,8 @@ define BuildFirmware/HLKRM04/initramfs endef Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02) +Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02) + Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3) Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) @@ -598,6 +600,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/FREESTATION5,$(1)) # $(call Image/Build/Profile/HG255D,$(1)) $(call Image/Build/Profile/HLKRM04,$(1)) + $(call Image/Build/Profile/HT-TM02,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) $(call Image/Build/Profile/IP2202,$(1)) $(call Image/Build/Profile/M3,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/hootoo.mk b/target/linux/ramips/rt305x/profiles/hootoo.mk new file mode 100644 index 0000000000..976226d5bd --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/hootoo.mk @@ -0,0 +1,28 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + + +define Profile/HT-TM02 + NAME:=HOOTOO HT-TM02 + PACKAGES:=\ + wpad-mini \ + kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio kmod-ledtrig-default-on \ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net usbutils \ + kmod-scsi-core kmod-scsi-generic kmod-fs-ext4 \ + kmod-usb-storage kmod-usb-storage-extras block-mount \ + kmod-usb-serial kmod-usb-serial-ftdi kmod-gpio-button-hotplug \ + kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 luci luci-mod-admin-full \ + kmod-app-samba luci-theme-openwrt luci-proto-relay relayd nano \ + fstools +endef + +define Profile/HT-TM02/Description + Package set for HOOTOO HT-TM02 board +endef + +$(eval $(call Profile,HT-TM02)) + -- 2.11.0