From: luka Date: Sat, 15 Feb 2014 23:53:10 +0000 (+0000) Subject: kirkwood: update support for dockstar X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=commitdiff_plain;h=ee87a993c1705879aa58d000dd515a6eec6ae24e kirkwood: update support for dockstar The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov Tested-by: Alexander Couzens CC: Imre Kaloz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39593 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds b/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds index 5c34cd6cd6..1600464da4 100644 --- a/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds +++ b/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds @@ -6,9 +6,9 @@ . /lib/functions/uci-defaults.sh case "`cat /proc/device-tree/model`" in -"Seagate FreeAgent DockStar") - ucidef_set_led_netdev "eth0" "dockstar:orange:misc" "eth0" - ucidef_set_led_default "health" "dockstar:green:health" "1" +"Seagate FreeAgent Dockstar") + ucidef_set_led_default "health" "status:green:health" "1" + ucidef_set_led_default "fault" "status:orange:fault" "1" ;; "Cloud Engines Pogoplug E02") ucidef_set_led_default "health" "status:green:health" "1" diff --git a/target/linux/kirkwood/patches-3.10/140-dockstar.patch b/target/linux/kirkwood/patches-3.10/140-dockstar.patch new file mode 100644 index 0000000000..8054891123 --- /dev/null +++ b/target/linux/kirkwood/patches-3.10/140-dockstar.patch @@ -0,0 +1,32 @@ +--- a/arch/arm/boot/dts/kirkwood-dockstar.dts ++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts +@@ -45,18 +45,22 @@ + + partition@0 { + label = "u-boot"; +- reg = <0x0000000 0x100000>; +- read-only; ++ reg = <0x0000000 0xe0000>; ++ }; ++ ++ partition@e0000 { ++ label = "u-boot environment"; ++ reg = <0xe0000 0x100000>; + }; + + partition@100000 { +- label = "uImage"; +- reg = <0x0100000 0x400000>; ++ label = "second stage u-boot"; ++ reg = <0x100000 0x200000>; + }; + +- partition@500000 { +- label = "data"; +- reg = <0x0500000 0xfb00000>; ++ partition@200000 { ++ label = "root"; ++ reg = <0x200000 0xfe00000>; + }; + }; + };