ramips: move different subtarget image generation to separate makefiles to improve...

[openwrt.git] / target / linux / ramips / image / mt7621.mk

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
new file mode 100644 (file)
index 0000000..745611f
--- /dev/null
+++ b/target/linux/ramips/image/mt7621.mk
@@ -0,0 +1,153 @@
+#
+# MT7621 Profiles
+#
+
+define Build/seama
+       $(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
+       mv $@.seama $@
+endef
+
+define Build/seama-seal
+       $(call Build/seama,-s $@.seama $(1))
+endef
+
+define Build/ubnt-erx-factory-compat
+       echo '21001:6' > $@.compat
+       $(TAR) -cf $@ --transform='s/^.*/compat/' $@.compat
+       $(RM) $@.compat
+endef
+
+define Build/ubnt-erx-factory-kernel
+       if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) ]; then \
+               $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
+               \
+               md5sum --binary $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) | awk '{print $$1}'> $@.md5; \
+               $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp.md5/' $@.md5; \
+               $(RM) $@.md5; \
+       fi
+endef
+
+define Build/ubnt-erx-factory-rootfs
+       echo "dummy" > $@.rootfs
+       $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp/' $@.rootfs
+
+       md5sum --binary $@.rootfs | awk '{print $$1}'> $@.md5
+       $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp.md5/' $@.md5
+       $(RM) $@.md5
+       $(RM) $@.rootfs
+endef
+
+define Build/ubnt-erx-factory-version
+       echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $@.version
+       $(TAR) -rf $@ --transform='s/^.*/version.tmp/' $@.version
+       $(RM) $@.version
+endef
+
+# We need kernel+initrams fit into kernel partition
+define Build/ubnt-erx-factory-check-size
+       @[ $$(($(subst k,* 1024,$(subst m, * 1024k,$(1))))) -ge "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" ] || { \
+               echo "WARNING: Initramfs kernel for image $@ is too big (kernel size: $$($(TAR) -xf $@ vmlinux.tmp -O | wc -c), max size $(1))" >&2; \
+               $(RM) -f $@; \
+       }
+
+       @[ "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" -gt 0 ] || { \
+               echo "WARNING: Kernel for image $@ not found" >&2; \
+               $(RM) -f $@; \
+       }
+endef
+
+ifeq ($(SUBTARGET),mt7621)
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
+endif
+
+define Device/mt7621
+  DTS := MT7621
+  IMAGE_SIZE := $(ralink_default_fw_size_4M)
+endef
+
+define Device/wsr-600
+  DTS := WSR-600
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/re6500
+  DTS := RE6500
+endef
+
+define Device/wsr-1166
+  DTS := WSR-1166
+  IMAGE/sysupgrade.bin := trx | pad-rootfs
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/dir-860l-b1
+  DTS := DIR-860L-B1
+  IMAGES += factory.bin
+  KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
+  IMAGE/sysupgrade.bin := \
+       append-kernel | pad-offset 65536 64 | append-rootfs | \
+       seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
+       pad-rootfs | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.bin := \
+       append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
+       seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
+       seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
+       check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/firewrt
+  DTS := FIREWRT
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/pbr-m1
+  DTS := PBR-M1
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/sap-g3200u3
+  DTS := SAP-G3200U3
+endef
+
+define Device/witi
+  DTS := WITI
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/zbt-wg2626
+  DTS := ZBT-WG2626
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+define Device/wf-2881
+  DTS := WF-2881
+  BLOCKSIZE := 128KiB
+  PAGESIZE := 2048
+  FILESYSTEMS := squashfs
+  IMAGE_SIZE := 132382720
+  KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma
+  IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/ubnt-erx
+  DTS := UBNT-ERX
+  FILESYSTEMS := squashfs
+  KERNEL_SIZE := 3145728
+  KERNEL := $(KERNEL_DTB) | uImage lzma
+  IMAGES := sysupgrade.tar $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),factory-initramfs.tar)
+  IMAGE/factory-initramfs.tar := ubnt-erx-factory-compat | \
+                                ubnt-erx-factory-kernel | \
+                                ubnt-erx-factory-rootfs | \
+                                ubnt-erx-factory-version | \
+                                ubnt-erx-factory-check-size $$(KERNEL_SIZE)
+  IMAGE/sysupgrade.tar := sysupgrade-nand
+endef
+
+# FIXME: is this still needed?
+define Image/Prepare
+#define Build/Compile
+       rm -rf $(KDIR)/relocate
+       $(CP) ../../generic/image/relocate $(KDIR)
+       $(MAKE) -C $(KDIR)/relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
+       $(CP) $(KDIR)/relocate/loader.bin $(KDIR)/loader.bin
+endef