+++ /dev/null
-/*****************************************************************************
- ** FILE NAME : ifxhcd.h
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the structures, constants, and interfaces for
- ** the Host Contoller Driver (HCD).
- **
- ** The Host Controller Driver (HCD) is responsible for translating requests
- ** from the USB Driver into the appropriate actions on the IFXUSB controller.
- ** It isolates the USBD from the specifics of the controller by providing an
- ** API to the USBD.
- ** FUNCTIONS :
- ** COMPILER : gcc
- ** REFERENCE : Synopsys DWC-OTG Driver 2.7
- ** COPYRIGHT :
- ** Version Control Section **
- ** $Author$
- ** $Date$
- ** $Revisions$
- ** $Log$ Revision history
-*****************************************************************************/
-
-/*!
- \defgroup IFXUSB_HCD HCD Interface
- \ingroup IFXUSB_DRIVER_V3
- \brief The Host Controller Driver (HCD) is responsible for translating requests
- from the USB Driver into the appropriate actions on the IFXUSB controller.
- It isolates the USBD from the specifics of the controller by providing an
- API to the USBD.
- */
-
-
-/*!
- \file ifxhcd.h
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the structures, constants, and interfaces for
- the Host Contoller Driver (HCD).
- */
-
-#if !defined(__IFXHCD_H__)
-#define __IFXHCD_H__
-
-#include <linux/list.h>
-#include <linux/usb.h>
-
-#ifdef __USE_TIMER_4_SOF__
-#include <linux/hrtimer.h>
-#endif
-#include <linux/usb/hcd.h>
-
-#include "ifxusb_cif.h"
-#include "ifxusb_plat.h"
-
-
-
-/*!
- \addtogroup IFXUSB_HCD
- */
-/*@{*/
-
-/* Phases for control transfers.*/
-typedef enum ifxhcd_control_phase {
- IFXHCD_CONTROL_SETUP,
- IFXHCD_CONTROL_DATA,
- IFXHCD_CONTROL_STATUS
-} ifxhcd_control_phase_e;
-
-/* Reasons for halting a host channel. */
-typedef enum ifxhcd_halt_status
-{
- HC_XFER_NO_HALT_STATUS, // Initial
- HC_XFER_COMPLETE, // Xact complete without error, upward
- HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward
- HC_XFER_STALL, // HC stopped abnormally, upward/downward
- HC_XFER_XACT_ERR, // HC stopped abnormally, upward
- HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward
- HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward
- HC_XFER_AHB_ERR, // HC stopped abnormally, upward
- HC_XFER_DATA_TOGGLE_ERR,
- HC_XFER_URB_DEQUEUE, // HC stopper manually, downward
- HC_XFER_NAK // HC stopped by nak monitor, downward
-} ifxhcd_halt_status_e;
-
-struct ifxhcd_urbd;
-struct ifxhcd_hc ;
-struct ifxhcd_epqh ;
-struct ifxhcd_hcd;
-
-/*!
- \brief A URB Descriptor (URBD) holds the state of a bulk, control,
- interrupt, or isochronous transfer. A single URBD is created for each URB
- (of one of these types) submitted to the HCD. The transfer associated with
- a URBD may require one or multiple transactions.
-
- A URBD is linked to a EP Queue Head, which is entered in either the
- isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
- execution, some or all of its transactions may be executed. After
- execution, the state of the URBD is updated. The URBD may be retired if all
- its transactions are complete or if an error occurred. Otherwise, it
- remains in the schedule so more transactions can be executed later.
- */
-typedef struct ifxhcd_urbd {
- struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
- struct urb *urb; /*!< URB for this transfer */
- //struct urb {
- // struct list_head urb_list;
- // struct list_head anchor_list;
- // struct usb_anchor * anchor;
- // struct usb_device * dev;
- // struct usb_host_endpoint * ep;
- // unsigned int pipe;
- // int status;
- // unsigned int transfer_flags;
- // void * transfer_buffer;
- // dma_addr_t transfer_dma;
- // u32 transfer_buffer_length;
- // u32 actual_length;
- // unsigned char * setup_packet;
- // dma_addr_t setup_dma;
- // int start_frame;
- // int number_of_packets;
- // int interval;
- // int error_count;
- // void * context;
- // usb_complete_t complete;
- // struct usb_iso_packet_descriptor iso_frame_desc[0];
- //};
- //urb_list For use by current owner of the URB.
- //anchor_list membership in the list of an anchor
- //anchor to anchor URBs to a common mooring
- //dev Identifies the USB device to perform the request.
- //ep Points to the endpoint's data structure. Will
- // eventually replace pipe.
- //pipe Holds endpoint number, direction, type, and more.
- // Create these values with the eight macros available; u
- // sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
- // "ctrl", "bulk", "int" or "iso". For example
- // usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
- // range from zero to fifteen. Note that "in" endpoint two
- // is a different endpoint (and pipe) from "out" endpoint
- // two. The current configuration controls the existence,
- // type, and maximum packet size of any given endpoint.
- //status This is read in non-iso completion functions to get
- // the status of the particular request. ISO requests
- // only use it to tell whether the URB was unlinked;
- // detailed status for each frame is in the fields of
- // the iso_frame-desc.
- //transfer_flags A variety of flags may be used to affect how URB
- // submission, unlinking, or operation are handled.
- // Different kinds of URB can use different flags.
- // URB_SHORT_NOT_OK
- // URB_ISO_ASAP
- // URB_NO_TRANSFER_DMA_MAP
- // URB_NO_SETUP_DMA_MAP
- // URB_NO_FSBR
- // URB_ZERO_PACKET
- // URB_NO_INTERRUPT
- //transfer_buffer This identifies the buffer to (or from) which the I/O
- // request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- // is set). This buffer must be suitable for DMA; allocate it
- // with kmalloc or equivalent. For transfers to "in"
- // endpoints, contents of this buffer will be modified. This
- // buffer is used for the data stage of control transfers.
- //transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
- // device driver is saying that it provided this DMA address,
- // which the host controller driver should use in preference
- // to the transfer_buffer.
- //transfer_buffer_length How big is transfer_buffer. The transfer may be broken
- // up into chunks according to the current maximum packet size
- // for the endpoint, which is a function of the configuration
- // and is encoded in the pipe. When the length is zero, neither
- // transfer_buffer nor transfer_dma is used.
- //actual_length This is read in non-iso completion functions, and it tells
- // how many bytes (out of transfer_buffer_length) were transferred.
- // It will normally be the same as requested, unless either an error
- // was reported or a short read was performed. The URB_SHORT_NOT_OK
- // transfer flag may be used to make such short reads be reported
- // as errors.
- //setup_packet Only used for control transfers, this points to eight bytes of
- // setup data. Control transfers always start by sending this data
- // to the device. Then transfer_buffer is read or written, if needed.
- //setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device
- // driver has provided this DMA address for the setup packet. The
- // host controller driver should use this in preference to setup_packet.
- //start_frame Returns the initial frame for isochronous transfers.
- //number_of_packets Lists the number of ISO transfer buffers.
- //interval Specifies the polling interval for interrupt or isochronous transfers.
- // The units are frames (milliseconds) for for full and low speed devices,
- // and microframes (1/8 millisecond) for highspeed ones.
- //error_count Returns the number of ISO transfers that reported errors.
- //context For use in completion functions. This normally points to request-specific
- // driver context.
- //complete Completion handler. This URB is passed as the parameter to the completion
- // function. The completion function may then do what it likes with the URB,
- // including resubmitting or freeing it.
- //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
- // status for each buffer.
-
- struct ifxhcd_epqh *epqh;
- // Actual data portion, not SETUP or STATUS in case of CTRL XFER
- // DMA adjusted
- uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
- uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
- uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */
- unsigned is_in :1;
- unsigned is_active:1;
-
- // For ALL XFER
- uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction
- within this transfer.
- */
- /*== AVM/BC 20101111 Needed for URB Complete List ==*/
- int status;
- // For ISOC XFER only
- #ifdef __EN_ISOC__
- int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
- frame descriptor describes the buffer position and length of the
- data to be transferred in the next scheduled (micro)frame of an
- isochronous transfer. It also holds status for that transaction.
- The frame index starts at 0.
- */
- // For SPLITed ISOC XFER only
- uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */
- uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
- #endif
-} ifxhcd_urbd_t;
-
-/*!
- \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
- maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
- be entered in either the isoc, intr or non-periodic schedule.
- */
-
-typedef struct ifxhcd_epqh {
- struct list_head epqh_list_entry; // Hook for EP Queues
- struct list_head urbd_list; /*!< List of URBDs for this EPQH. */
- struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */
- struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */
- struct usb_host_endpoint *sysep;
- uint8_t ep_type; /*!< Endpoint type. One of the following values:
- - IFXUSB_EP_TYPE_CTRL
- - IFXUSB_EP_TYPE_ISOC
- - IFXUSB_EP_TYPE_BULK
- - IFXUSB_EP_TYPE_INTR
- */
- uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */
-
- /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
- /*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet
- One of the following values:
- - IFXHCD_HC_PID_DATA0
- - IFXHCD_HC_PID_DATA1
- */
- uint8_t is_active;
-
- uint8_t pkt_count_limit;
- #ifdef __EPQD_DESTROY_TIMEOUT__
- struct timer_list destroy_timer;
- #endif
-
- uint16_t wait_for_sof;
- uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */
- uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/
-
- uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */
- uint8_t period_do;
-
- uint8_t aligned_checked;
-
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- uint8_t using_aligned_setup;
- uint8_t *aligned_setup;
- uint8_t using_aligned_buf;
- uint8_t *aligned_buf;
- unsigned aligned_buf_len : 19;
- #endif
-
- uint8_t *dump_buf;
-} ifxhcd_epqh_t;
-
-
-#if defined(__HC_XFER_TIMEOUT__)
- struct ifxusb_core_if;
- struct ifxhcd_hc;
- typedef struct hc_xfer_info
- {
- struct ifxusb_core_if *core_if;
- struct ifxhcd_hc *hc;
- } hc_xfer_info_t;
-#endif //defined(__HC_XFER_TIMEOUT__)
-
-
-/*!
- \brief Host channel descriptor. This structure represents the state of a single
- host channel when acting in host mode. It contains the data items needed to
- transfer packets to an endpoint via a host channel.
- */
-typedef struct ifxhcd_hc
-{
- struct list_head hc_list_entry ; // Hook to free hc
- struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */
-
- uint8_t hc_num ; /*!< Host channel number used for register address lookup */
- uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */
- uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
- uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */
- uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
- ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
-
- unsigned dev_addr : 7; /*!< Device to access */
- unsigned ep_num : 4; /*!< EP to access */
- unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */
- unsigned speed : 2; /*!< EP speed. */
- unsigned ep_type : 2; /*!< Endpoint type. */
- unsigned mps :11; /*!< Max packet size in bytes */
- unsigned data_pid_start : 2; /*!< PID for initial transaction. */
- unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
- channel. If 0, process normally.
- */
-
- unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
- it has been started, 0 otherwise.
- */
- unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
- finished flushing queued requests. Otherwise 0.
- */
- unsigned short_rw : 1; /*!< When Tx, means termination needed.
- When Rx, indicate Short Read */
- /* Split settings for the host channel */
- unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
-
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- unsigned nyet_count;
-
- /* nak monitor */
- unsigned nak_retry_r : 16;
- unsigned nak_retry : 16;
- #define nak_retry_max 40000
- unsigned nak_countdown : 8;
- unsigned nak_countdown_r: 8;
- #define nak_countdown_max 1
-
- uint16_t wait_for_sof;
- ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */
- uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
- #ifdef __DEBUG__
- uint32_t start_hcchar_val;
- #endif
- #ifdef __HC_XFER_TIMEOUT__
- hc_xfer_info_t hc_xfer_info;
- struct timer_list hc_xfer_timer;
- #endif
- uint32_t hcchar;
-
- /* Split settings for the host channel */
- uint8_t hub_addr; /*!< Address of high speed hub */
- uint8_t port_addr; /*!< Port of the low/full speed device */
- #ifdef __EN_ISOC__
- uint8_t isoc_xact_pos; /*!< Split transaction position */
- #endif
-} ifxhcd_hc_t;
-
-
-/*!
- \brief This structure holds the state of the HCD, including the non-periodic and
- periodic schedules.
- */
-typedef struct ifxhcd_hcd
-{
- struct device *dev;
- struct hc_driver hc_driver;
- ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */
- struct usb_hcd *syshcd;
-
- volatile union ifxhcd_internal_flags
- {
- uint32_t d32;
- struct
- {
- unsigned port_connect_status_change : 1;
- unsigned port_connect_status : 1;
- unsigned port_reset_change : 1;
- unsigned port_enable_change : 1;
- unsigned port_suspend_change : 1;
- unsigned port_over_current_change : 1;
- unsigned reserved : 27;
- } b;
- } flags; /*!< Internal HCD Flags */
-
- struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing
- a host channel descriptor given the host channel number. This is
- useful in interrupt handlers.
- */
- struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
- uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a
- control transfer. Normally no data is transferred during the status
- phase. This buffer is used as a bit bucket.
- */
- #define IFXHCD_STATUS_BUF_SIZE 64
-
- struct list_head epqh_np_active; // with URBD, with HC
- struct list_head epqh_np_ready; // with URBD, No HC
-
- struct list_head epqh_intr_active; // with URBD, with HC
- struct list_head epqh_intr_ready; // with URBD, no pass, No HC
-
- #ifdef __EN_ISOC__
- struct list_head epqh_isoc_active; // with URBD, with HC
- struct list_head epqh_isoc_ready; // with URBD, no pass, No HC
- #endif
-
- /*== AVM/BC 20101111 URB Complete List ==*/
- struct list_head urbd_complete_list;
-
- struct list_head epqh_stdby;
-
- /* AVM/BC 20101111 flags removed */
- //unsigned process_channels_in_use : 1;
- //unsigned select_eps_in_use : 1;
-
- struct tasklet_struct select_eps; /*!< Tasket to do a reset */
- uint32_t lastframe;
- spinlock_t lock;
-#ifdef __USE_TIMER_4_SOF__
- struct hrtimer hr_timer;
-#endif
-} ifxhcd_hcd_t;
-
-/* Gets the ifxhcd_hcd from a struct usb_hcd */
-static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
-{
- return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
-}
-
-/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
-static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
-{
- return (struct usb_hcd *)(ifxhcd->syshcd);
-}
-
-/*! \brief HCD Create/Destroy Functions */
-/*@{*/
- extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd);
- extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-/*! \brief Linux HC Driver API Functions */
-/*@{*/
-extern int ifxhcd_start(struct usb_hcd *hcd);
-extern void ifxhcd_stop (struct usb_hcd *hcd);
-extern int ifxhcd_get_frame_number(struct usb_hcd *hcd);
-
-
-/*!
- \brief This function does the setup for a data transfer for a host channel and
- starts the transfer. May be called in either Slave mode or DMA mode. In
- Slave mode, the caller must ensure that there is sufficient space in the
- request queue and Tx Data FIFO.
-
- For an OUT transfer in Slave mode, it loads a data packet into the
- appropriate FIFO. If necessary, additional data packets will be loaded in
- the Host ISR.
-
- For an IN transfer in Slave mode, a data packet is requested. The data
- packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- additional data packets are requested in the Host ISR.
-
- For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- register along with a packet count of 1 and the channel is enabled. This
- causes a single PING transaction to occur. Other fields in HCTSIZ are
- simply set to 0 since no data transfer occurs in this case.
-
- For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- all the information required to perform the subsequent data transfer. In
- addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- controller performs the entire PING protocol, then starts the data
- transfer.
-
- @param _ifxhc Information needed to initialize the host channel. The xfer_len
- value may be reduced to accommodate the max widths of the XferSize and
- PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- to reflect the final xfer_len value.
- */
-extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
-//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
-extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
-int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
- /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
- struct urb *_urb,
- gfp_t _mem_flags);
-int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
- struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
-
-extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
-
-extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
-extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
- u16 _typeReq,
- u16 _wValue,
- u16 _wIndex,
- char *_buf,
- u16 _wLength);
-
-/*@}*/
-
-/*! \brief Transaction Execution Functions */
-/*@{*/
-extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-
-/*@}*/
-
-/*! \brief Deferred Transaction Execution Functions */
-/*@{*/
-
-/*== AVM/BC 20101111 URB Complete List ==*/
-extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-
-/*!
- \brief Clears the transfer state for a host channel. This function is normally
- called after a transfer is done and the host channel is being released.
- */
-extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-/*!
- \brief Attempts to halt a host channel. This function should only be called in
- Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
- normal circumstances in DMA mode, the controller halts the channel when the
- transfer is complete or a condition occurs that requires application
- intervention.
-
- In slave mode, checks for a free request queue entry, then sets the Channel
- Enable and Channel Disable bits of the Host Channel Characteristics
- register of the specified channel to intiate the halt. If there is no free
- request queue entry, sets only the Channel Disable bit of the HCCHARn
- register to flush requests for this channel. In the latter case, sets a
- flag to indicate that the host channel needs to be halted when a request
- queue slot is open.
-
- In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- HCCHARn register. The controller ensures there is space in the request
- queue before submitting the halt request.
-
- Some time may elapse before the core flushes any posted requests for this
- host channel and halts. The Channel Halted interrupt handler completes the
- deactivation of the host channel.
- */
-extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
- ifxhcd_hc_t *_ifxhc,
- ifxhcd_halt_status_e _halt_status);
-
-/*!
- \brief Prepares a host channel for transferring packets to/from a specific
- endpoint. The HCCHARn register is set up with the characteristics specified
- in _ifxhc. Host channel interrupts that may need to be serviced while this
- transfer is in progress are enabled.
- */
-extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-/*!
- \brief This function is called to handle the disconnection of host port.
- */
-int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-/*! \brief Interrupt Handler Functions */
-/*@{*/
-extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
-
-extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
-extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-
-/*! \brief Schedule Queue Functions */
-/*@{*/
-extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
-extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh);
-extern void select_eps (ifxhcd_hcd_t *_ifxhcd);
-extern void process_channels(ifxhcd_hcd_t *_ifxhcd);
-extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
-extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
-extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
-extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
-/*@}*/
-
-/*! \brief Gets the usb_host_endpoint associated with an URB. */
-static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
-{
- struct usb_device *dev = _urb->dev;
- int ep_num = usb_pipeendpoint(_urb->pipe);
-
- return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
-}
-
-/*!
- * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
- * qualified with its direction (possible 32 endpoints per device).
- */
-#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
- ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-
-
-/* AVM/WK: not needed?
-
-extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port);
-extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
-extern void usb_remove_hcd (struct usb_hcd *syshcd);
-extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
-extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
-extern void usb_put_hcd (struct usb_hcd *syshcd);
-extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
-
-*/
-/** Internal Functions */
-void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
-extern char *syserr(int errno);
-
-/*@}*//*IFXUSB_HCD*/
-
-#endif // __IFXHCD_H__
projects / openwrt.git / blobdiff