[lantiq] move files-3.3 -> files
[openwrt.git] / target / linux / lantiq / files / arch / mips / lantiq / xway / mach-netgear.c
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c
new file mode 100644 (file)
index 0000000..29b0728
--- /dev/null
@@ -0,0 +1,239 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2012 Pieter Voorthuijsen <p.voorthuijsen@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/ath9k_platform.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+#include "dev-wifi-athxk.h"
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+#include "pci-ath-fixup.h"
+#include <mtd/mtd-abi.h>
+#include <asm-generic/sizes.h>
+
+static struct mtd_partition dgn3500_partitions[] = {
+       {
+               .name = "u-boot",
+               .offset = 0,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "environment",
+               .offset = 0x10000,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "calibration",
+               .offset = 0x20000,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "linux",
+               .offset = 0x50000,
+               .size = 0xfa0000,
+       },
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+       .clock  = PCI_CLOCK_INT,
+       .gpio   = PCI_GNT1 | PCI_REQ1,
+       .irq    = {
+               [14] = INT_NUM_IM0_IRL0 + 22,
+       },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+       .mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static struct gpio_led
+dgn3500_gpio_leds[] __initdata = {
+       { .name = "soc:green:power", .gpio = 34, .active_low = 1, },
+       { .name = "soc:red:power", .gpio = 39, .active_low = 1, },
+       { .name = "soc:orange:wlan", .gpio = 51, .active_low = 1, },
+       { .name = "soc:green:wps", .gpio = 52, .active_low = 1, },
+       { .name = "soc:green:usb", .gpio = 22, .active_low = 1, },
+       { .name = "soc:green:dsl", .gpio = 4, .active_low = 1, },
+       { .name = "soc:green:internet", .gpio = 2, .active_low = 1, },
+};
+
+static struct gpio_keys_button
+dgn3500_gpio_keys[] __initdata = {
+       {
+               .desc = "wps",
+               .type = EV_KEY,
+               .code = BTN_0,
+               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = 54,
+               .active_low = 1,
+       },
+       {
+               .desc = "reset",
+               .type = EV_KEY,
+               .code = BTN_1,
+               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = 36,
+               .active_low = 1,
+       },
+};
+
+#define SPI_GPIO_MRST   16
+#define SPI_GPIO_MTSR   17
+#define SPI_GPIO_CLK    18
+#define SPI_GPIO_CS0    10
+
+static struct spi_gpio_platform_data spi_gpio_data = {
+       .sck            = SPI_GPIO_CLK,
+       .mosi           = SPI_GPIO_MTSR,
+       .miso           = SPI_GPIO_MRST,
+       .num_chipselect = 2,
+};
+
+static struct platform_device spi_gpio_device = {
+       .name                   = "spi_gpio",
+       .dev.platform_data      = &spi_gpio_data,
+};
+
+static struct flash_platform_data spi_flash_data = {
+       .name           = "sflash",
+       .parts          = dgn3500_partitions,
+       .nr_parts       = ARRAY_SIZE(dgn3500_partitions),
+};
+
+static struct spi_board_info spi_flash __initdata = {
+       .modalias               = "m25p80",
+       .bus_num                = 0,
+       .chip_select            = 0,
+       .max_speed_hz           = 10 * 1000 * 1000,
+       .mode                   = SPI_MODE_3,
+       .chip_select            = 0,
+       .controller_data        = (void *) SPI_GPIO_CS0,
+       .platform_data          = &spi_flash_data
+};
+
+static u8 ltq_ethaddr[6] = { 0 };
+
+static int __init setup_ethaddr(char *str)
+{
+       if (!mac_pton(str, ltq_ethaddr))
+               memset(ltq_ethaddr, 0, 6);
+       return 0;
+}
+__setup("ethaddr=", setup_ethaddr);
+
+static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0};
+
+static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj,
+               struct bin_attribute *attr, char *buf,
+               loff_t offset, size_t count)
+{
+       if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
+               return 0;
+       if ((offset + count) > sizeof(dgn3500_eeprom_data))
+               count = sizeof(dgn3500_eeprom_data) - offset;
+       if (unlikely(!count))
+               return count;
+
+       memcpy(buf, (char *)(dgn3500_eeprom_data) + offset, count);
+
+       return count;
+}
+
+extern struct ath9k_platform_data ath9k_pdata;
+
+static ssize_t ath_eeprom_write(struct file *filp, struct kobject *kobj,
+               struct bin_attribute *attr, char *buf,
+               loff_t offset, size_t count)
+{
+       int i;
+       char *eeprom_bytes = (char *)dgn3500_eeprom_data;
+
+       if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
+               return -EFBIG;
+       if ((offset + count) > sizeof(dgn3500_eeprom_data))
+               count = sizeof(dgn3500_eeprom_data) - offset;
+       if (unlikely(!count))
+               return count;
+       if (count % 2)
+               return 0;
+
+       /* The PCI fixup routine requires an endian swap of the calibartion data
+        * stored in flash */
+       for (i = 0; i < count; i += 2) {
+               eeprom_bytes[offset + i + 1] = buf[i];
+               eeprom_bytes[offset + i] = buf[i+1];
+       }
+
+       /* The original data does not contain a checksum. Set the country and
+        * calculate new checksum when all data is received */
+       if ((count + offset) == sizeof(dgn3500_eeprom_data))
+               memcpy(ath9k_pdata.eeprom_data, dgn3500_eeprom_data,
+                               sizeof(ath9k_pdata.eeprom_data));
+
+       return count;
+}
+
+static struct bin_attribute dev_attr_ath_eeprom = {
+       .attr = {
+               .name = "ath_eeprom",
+               .mode = S_IRUGO|S_IWUSR,
+       },
+       .read = ath_eeprom_read,
+       .write = ath_eeprom_write,
+};
+
+static void __init dgn3500_init(void)
+{
+       if (sysfs_create_bin_file(firmware_kobj, &dev_attr_ath_eeprom))
+               printk(KERN_INFO "Failed to create ath eeprom sysfs entry\n");
+       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(dgn3500_gpio_leds),
+                       dgn3500_gpio_leds);
+       ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+                       ARRAY_SIZE(dgn3500_gpio_keys), dgn3500_gpio_keys);
+       platform_device_register(&spi_gpio_device);
+       ltq_register_pci(&ltq_pci_data);
+       spi_register_board_info(&spi_flash, 1);
+       if (!is_valid_ether_addr(ltq_ethaddr)) {
+               printk(KERN_INFO "MAC invalid using random\n");
+               random_ether_addr(ltq_ethaddr);
+       }
+       memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
+       ltq_register_etop(&ltq_eth_data);
+       ltq_register_ath9k(dgn3500_eeprom_data, ltq_ethaddr);
+       ltq_pci_ath_fixup(14, dgn3500_eeprom_data);
+       /* The usb power is always enabled, protected by a fuse */
+       xway_register_dwc(-1);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_DGN3500B,
+            "DGN3500B",
+            "Netgear DGN3500B",
+             dgn3500_init);