kirkwood: drop 4.3 support

[openwrt.git] / target / linux / kirkwood / patches-4.3 / 150-ea3500.patch

diff --git a/target/linux/kirkwood/patches-4.3/150-ea3500.patch b/target/linux/kirkwood/patches-4.3/150-ea3500.patch
deleted file mode 100644 (file)
index a30ade1..0000000
--- a/target/linux/kirkwood/patches-4.3/150-ea3500.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
-       kirkwood-is2.dtb \
-       kirkwood-km_kirkwood.dtb \
-       kirkwood-laplug.dtb \
-+      kirkwood-linksys-audi.dtb \
-       kirkwood-linksys-viper.dtb \
-       kirkwood-lschlv2.dtb \
-       kirkwood-lswvl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,179 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+      model = "Linksys EA3500";
-+      compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x4000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8 earlyprintk";
-+      };
-+
-+      mbus {
-+              pcie-controller {
-+                      status = "okay";
-+
-+                      pcie@1,0 {
-+                              status = "okay";
-+                      };
-+
-+                      pcie@2,0 {
-+                              status = "okay";
-+                      };
-+              };
-+      };
-+
-+      ocp@f1000000 {
-+              pinctrl: pin-controller@10000 {
-+                      pmx_led_green_power: pmx-led-green-power {
-+                              marvell,pins = "mpp7";
-+                              marvell,function = "gpo";
-+                      };
-+                      pmx_btn_wps: pmx-btn-wps {
-+                              marvell,pins = "mpp47";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_btn_reset: pmx-btn-reset {
-+                              marvell,pins = "mpp48";
-+                              marvell,function = "gpio";
-+                      };
-+              };
-+
-+              rtc@10300 {
-+                      status = "disabled";
-+              };
-+
-+              serial@12000 {
-+                      status = "okay";
-+              };
-+
-+      };
-+
-+      gpio_keys {
-+              compatible = "gpio-keys";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+              pinctrl-names = "default";
-+
-+              button@15 {
-+                      label = "WPS Button";
-+                      linux,code = <KEY_WPS_BUTTON>;
-+                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              button@16 {
-+                      label = "Reset Button";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+
-+      gpio-leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = < &pmx_led_green_power >;
-+              pinctrl-names = "default";
-+
-+              green-power {
-+                      label = "audi:green:power";
-+                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-+      mvsw61xx {
-+              compatible = "marvell,88e6171";
-+              status = "okay";
-+              reg = <0x10>;
-+
-+              mii-bus = <&mdio>;
-+              cpu-port-0 = <5>;
-+              cpu-port-1 = <6>;
-+              is-indirect;
-+      };
-+};
-+
-+&nand {
-+      status = "okay";
-+      pinctrl-0 = <&pmx_nand>;
-+      pinctrl-names = "default";
-+
-+      partition@0 {
-+              label = "u-boot";
-+              reg = <0x0 0x80000>;
-+      };
-+
-+      partition@80000 {
-+              label = "u_env";
-+              reg = <0x80000 0x4000>;
-+      };
-+
-+      partition@84000 {
-+              label = "s_env";
-+              reg = <0x84000 0x4000>;
-+      };
-+
-+      partition@200000 {
-+              label = "kernel1";
-+              reg = <0x200000 0x1400000>;
-+      };
-+
-+      partition@490000 {
-+              label = "rootfs1";
-+              reg = <0x490000 0x1170000>;
-+      };
-+
-+      partition@1600000 {
-+              label = "kernel2";
-+              reg = <0x1600000 0x1400000>;
-+      };
-+
-+      partition@1890000 {
-+              label = "rootfs2";
-+              reg = <0x1890000 0x1170000>;
-+      };
-+
-+      partition@2a00000 {
-+              label = "syscfg";
-+              reg = <0x2a00000  0x1600000>;
-+      };
-+};
-+
-+&mdio {
-+      status = "okay";
-+};
-+
-+&eth0 {
-+      status = "okay";
-+      ethernet0-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};
-+
-+&eth1 {
-+      status = "okay";
-+      ethernet1-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};