--- /dev/null
+From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 15 May 2014 00:29:18 -0700
+Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
+
+Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
+The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
+to this function.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +-
+ drivers/net/ethernet/intel/igb/e1000_phy.c | 74 +++++++++++++++++++---------
+ drivers/net/ethernet/intel/igb/e1000_phy.h | 6 ++-
+ 3 files changed, 58 insertions(+), 26 deletions(-)
+
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -2153,7 +2153,7 @@ static s32 igb_read_phy_reg_82580(struct
+ if (ret_val)
+ goto out;
+
+- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -2178,7 +2178,7 @@ static s32 igb_write_phy_reg_82580(struc
+ if (ret_val)
+ goto out;
+
+- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+
+ hw->phy.ops.release(hw);
+
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -126,9 +126,8 @@ out:
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+- struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+@@ -147,14 +146,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ default:
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ }
+@@ -208,9 +207,8 @@ out:
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+- struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+@@ -229,7 +227,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+@@ -238,7 +236,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ default:
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+ break;
+ }
+@@ -458,7 +456,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+- ret_val = igb_write_phy_reg_mdic(hw,
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+@@ -467,8 +465,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+ }
+ }
+
+- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+- data);
++ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
++ MAX_PHY_REG_ADDRESS & offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -497,7 +495,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+- ret_val = igb_write_phy_reg_mdic(hw,
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+@@ -506,8 +504,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+ }
+ }
+
+- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+- data);
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
++ MAX_PHY_REG_ADDRESS & offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -2547,8 +2545,9 @@ out:
+ }
+
+ /**
+- * igb_write_phy_reg_gs40g - Write GS40G PHY register
++ * igb_write_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
++ * @addr: phy address to write to
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+@@ -2556,7 +2555,7 @@ out:
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2566,10 +2565,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
+ if (ret_val)
+ return ret_val;
+
+- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
+
+ release:
+ hw->phy.ops.release(hw);
+@@ -2577,8 +2576,24 @@ release:
+ }
+
+ /**
+- * igb_read_phy_reg_gs40g - Read GS40G PHY register
++ * igb_write_phy_reg_gs40g - Write GS40G PHY register
++ * @hw: pointer to the HW structure
++ * @offset: lower half is register offset to write to
++ * upper half is page to use.
++ * @data: data to write at register offset
++ *
++ * Acquires semaphore, if necessary, then writes the data to PHY register
++ * at the offset. Release any acquired semaphores before exiting.
++ **/
++s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++{
++ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
++ * igb_read_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
++ * @addr: phy address to read from
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+@@ -2586,7 +2601,7 @@ release:
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2596,10 +2611,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
+ if (ret_val)
+ return ret_val;
+
+- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
+
+ release:
+ hw->phy.ops.release(hw);
+@@ -2607,6 +2622,21 @@ release:
+ }
+
+ /**
++ * igb_read_phy_reg_gs40g - Read GS40G PHY register
++ * @hw: pointer to the HW structure
++ * @offset: lower half is register offset to read to
++ * upper half is page to use.
++ * @data: data to read at register offset
++ *
++ * Acquires semaphore, if necessary, then reads the data in the PHY register
++ * at the offset. Release any acquired semaphores before exiting.
++ **/
++s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
+@@ -62,8 +62,8 @@ void igb_power_up_phy_copper(struct e100
+ void igb_power_down_phy_copper(struct e1000_hw *hw);
+ s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+ s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw);
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+ s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+@@ -73,6 +73,8 @@ s32 igb_phy_force_speed_duplex_82580(st
+ s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+ s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32 igb_check_polarity_m88(struct e1000_hw *hw);
+
+ /* IGP01E1000 Specific Registers */
projects / openwrt.git / blobdiff