brcm63xx: add linux 4.4 support

[openwrt.git] / target / linux / brcm63xx / patches-4.4 / 562-board_VR-3025u.patch

diff --git a/target/linux/brcm63xx/patches-4.4/562-board_VR-3025u.patch b/target/linux/brcm63xx/patches-4.4/562-board_VR-3025u.patch
new file mode 100644 (file)
index 0000000..56ad1b9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/562-board_VR-3025u.patch
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1714,6 +1714,60 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
+ 
++static struct sprom_fixup __initdata vr3025u_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025u = {
++      .name                                   = "96368M-1541N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3025u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
++      },
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+       .alias = "eth0",
+ };
+@@ -2008,6 +2062,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_VR3025u,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2101,6 +2156,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268