brcm63xx: drop 3.18 support
[openwrt.git] / target / linux / brcm63xx / patches-3.18 / 001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch
diff --git a/target/linux/brcm63xx/patches-3.18/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch b/target/linux/brcm63xx/patches-3.18/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch
deleted file mode 100644 (file)
index 437448f..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-From d1d81802522ade84128a2c66c0d500e372474dca Mon Sep 17 00:00:00 2001
-From: Torsten Fleischer <torfl6749@gmail.com>
-Date: Mon, 3 Nov 2014 17:17:55 +0100
-Subject: [PATCH] spi: spi-gpio: Add dt support for a single device with no
- chip select
-
-In order to describe a single slave device that has no chip select line
-the 'num-chipselects' property has to be <0> and the 'cs-gpios' property
-doesn't need to be set.
-
-Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- Documentation/devicetree/bindings/spi/spi-gpio.txt |  6 ++++--
- drivers/spi/spi-gpio.c                             | 21 +++++++++++++++------
- 2 files changed, 19 insertions(+), 8 deletions(-)
-
---- a/Documentation/devicetree/bindings/spi/spi-gpio.txt
-+++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt
-@@ -8,8 +8,10 @@ Required properties:
-  - gpio-sck: GPIO spec for the SCK line to use
-  - gpio-miso: GPIO spec for the MISO line to use
-  - gpio-mosi: GPIO spec for the MOSI line to use
-- - cs-gpios: GPIOs to use for chipselect lines
-- - num-chipselects: number of chipselect lines
-+ - cs-gpios: GPIOs to use for chipselect lines.
-+             Not needed if num-chipselects = <0>.
-+ - num-chipselects: Number of chipselect lines. Should be <0> if a single device
-+                    with no chip select is connected.
- Example:
---- a/drivers/spi/spi-gpio.c
-+++ b/drivers/spi/spi-gpio.c
-@@ -424,6 +424,7 @@ static int spi_gpio_probe(struct platfor
-       struct spi_gpio_platform_data   *pdata;
-       u16 master_flags = 0;
-       bool use_of = 0;
-+      int num_devices;
-       status = spi_gpio_probe_dt(pdev);
-       if (status < 0)
-@@ -433,16 +434,21 @@ static int spi_gpio_probe(struct platfor
-       pdata = dev_get_platdata(&pdev->dev);
- #ifdef GENERIC_BITBANG
--      if (!pdata || !pdata->num_chipselect)
-+      if (!pdata || (!use_of && !pdata->num_chipselect))
-               return -ENODEV;
- #endif
-+      if (use_of && !SPI_N_CHIPSEL)
-+              num_devices = 1;
-+      else
-+              num_devices = SPI_N_CHIPSEL;
-+
-       status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
-       if (status < 0)
-               return status;
-       master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
--                                      (sizeof(int) * SPI_N_CHIPSEL));
-+                                      (sizeof(int) * num_devices));
-       if (!master) {
-               status = -ENOMEM;
-               goto gpio_free;
-@@ -457,7 +463,7 @@ static int spi_gpio_probe(struct platfor
-       master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-       master->flags = master_flags;
-       master->bus_num = pdev->id;
--      master->num_chipselect = SPI_N_CHIPSEL;
-+      master->num_chipselect = num_devices;
-       master->setup = spi_gpio_setup;
-       master->cleanup = spi_gpio_cleanup;
- #ifdef CONFIG_OF
-@@ -472,9 +478,12 @@ static int spi_gpio_probe(struct platfor
-                * property of the node.
-                */
--              for (i = 0; i < SPI_N_CHIPSEL; i++)
--                      spi_gpio->cs_gpios[i] =
--                              of_get_named_gpio(np, "cs-gpios", i);
-+              if (!SPI_N_CHIPSEL)
-+                      spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT;
-+              else
-+                      for (i = 0; i < SPI_N_CHIPSEL; i++)
-+                              spi_gpio->cs_gpios[i] =
-+                                      of_get_named_gpio(np, "cs-gpios", i);
-       }
- #endif