From: John Crispin <blogic@openwrt.org>
Date: Mon, 18 Aug 2014 13:10:04 +0000 (+0000)
Subject: ramips: fix switch config for Edimax 3G-6200n
X-Git-Url: https://git.archive.openwrt.org/?p=15.05%2Fopenwrt.git;a=commitdiff_plain;h=743beb18ffc3db90f33c2b9912822aa9120fab05

ramips: fix switch config for Edimax 3G-6200n

Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42194 3c298f89-4303-0410-b956-a3cf2f4a3e73
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7857aca481..e027b3be89 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -61,7 +61,6 @@ ramips_setup_interfaces()
 		ucidef_set_interface_lan "eth0.1"
 		;;
 
-	3g-6200n | \
 	b2c | \
 	nw718 | \
 	psr-680w | \
@@ -98,6 +97,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "4 9t"
 		;;
 
+	3g-6200n | \
 	dir-610-a1 | \
 	dir-300-b7 | \
 	dir-320-b1 | \